slide 1: The size and the use of solar cable are critical and any negligence can result in worse
situation. Solar cables manufacturers will make you to go through every little detail
in this post. In case you are not feeling confident to handle the situation you can make
call for professional assistance and get instant help of qualified electrician having
knowledge of 12 volt solar systems.
Manufacturers offer complete catalogues that have distinct sizes and types of cables
but there are wires that are doing better job than others. Here we will discuss about
wiring for 12 volt DC circuits that are found in cars boats caravans and solar systems.
The type of wire used in solar panels system:
Manufacturers install electrical wire that has one of two types of conductor which is
the central metal wire core. One is single stranded conductor and other is multi
stranded conductor.
slide 2: Multi stranded conductor VS single core conductor:
Single core conductor is just one strand which is employed in domestic wiring. This
single strand wire can weaken and fracture under vibration and this is why these are
installed in domestic wiring projects only. Multi stranded conductors are installed in
the systems that may have to face continuous vibration such as boats vehicles and
airplane. But good part is that multi stranded conductors perform better under
continuous vibration.
Cables and wires supplied by manufacturers are rated and have a maximum current
rating that should never be exceeded. These ratings are made according to current
rating that can safely pass along it. If the wire is thicker it will have the higher current.
In case you own two or multiple solar modules to wire in series you can use MC4
connectors with convenience. The make MC4 connector is related to the positive lead
and female connector is related to the negative lead. However some manufacturers
do not follow this same case and for such situation it is suggested to look at the
markings on the junction box or test the polarity of the wire using a digital volt meter.
When you make the connection the male connector will snap directly into female
connector. This is how the voltage of the circuit gets increased.
If it is your first time that you are using solar modules you need to be a bit careful.
These are expensive products and nobody wants to buy a costly cable that doesn’t
meet the length requirement after its being cut. It is not possible to return the cut
wires. You must know the apt length and its use to connect your panels together.
For more updates regarding solar cables or power cables contact solar cable
manufacturers today. They are dealing with regular queries regarding solar cables
and supplying their range of products to worldwide customers.
Thank you for reading this post. You can share your thoughts with other readers
too.
This article is originally posted on:
http://wire-cable-industries.blogspot.in/2016/07/how-to-select-wires-for-solar-panels.html