PADMESH GUPTA - DENSE MEDIUM SEPARATION

Views:
 
     
 

Presentation Description

Padmesh Gupta - Dense medium separation or Heavy medium separation (HMS), or the sink and float process is applied to the pre-concentration of minerals (including Coal), i.e, the rejection of gangue prior to grinding for final liberation. It is also used in coal preparation to produce a commercially graded end-product, clean coal being separated from the heavier shale or high ash coal. For more update about Padmesh Gupta click here… https://www.padmeshgupta.com/blog/

Comments

Presentation Transcript

slide 1:

PADMESH GUPTA - DENSE MEDIUM SEPARATION By:- Padmesh Gupta IND:- 712 6657400 Email: infoguptaglobal.com

slide 2:

DENSE MEDIUM SEPARATION • Dense medium separation or Heavy medium separation HMS or the sink and float process is applied to the pre- concentration of minerals including Coal i.e the rejection of gangue prior to grinding for final liberation. It is also used in coal preparation to produce a commercially gradedend- product clean coal being separated from the heavier shale or high ash Coal.

slide 3:

Padmesh Gupta - DMS • Dense medium separation is applicable to any ore in which after a Suitable degree of liberation by crushing there is enough difference in specific gravity between the particles to separate those which will repay the cost of further treatment from those which will not.

slide 4:

Padmesh Gupta • The process is most widely applied when the density difference occurs at a coarse paticle sizeas separation efficiency decreases with size due to the slower rate of settling of the particles. • Particles should preferably be larger than about 3mm in diameter in which case separation can be effective ona difference in specific gravity of 0.1 or less explains Mr. Padmesh Gupta.

slide 5:

gupta corporation limited • The process offers some advantages over other gravity processes. It has the ability to make sharp Separation at any required density with a high degree of efficiency even in the presence of highpercentage of near-density material NGM.

slide 6:

padmesh gupta coal • The density of separation can be closely controlled within a relative density of +-0.005 Kg/ltr and can be maintained under normal conditions for indefinite periods. The separating density can however be changed at will and fairly quickly to meet varying requirements. • The process is however rather expensive mainly due to the ancillary equipment needed to clean the medium elaborates Mr. Padmesh Gupta.

slide 7:

For Latest Client Case Studies Kindly get in touch with us Website : www.padmeshgupta.com/blog/ By:- Padmesh Gupta •IND:- 712 6657400 •Email: infoguptaglobal.com Thank You