ij.start.canon | Canon IJ Setup & Install | Canon Wireless Setup


Presentation Description

ij.start.canon printer renders amazing print on single click. Avail all the printer features and service by configuring the canon printer with the device.


Presentation Transcript

slide 1:

IJ Start Canon Printer Setup https://ij-start-canon.org/

slide 2:

Canon Network Device Setup Utility • The main purpose of the Setup utility is to have easy communication with the printer. Here the basic steps are mentioned to begin this setup: ij.start.canon • Before getting into the procedure for setup utility you need to check whether drivers are installed on your computer. • Check and confirm the printer setup and then begin your network device setup utility. • Since device setup utility is done only when you installed the drivers for your printer. • Depending upon your PC choose the download file. Now you’ve to go to start and then get into All Apps and finally into the Canon IJ Network Setup utility. • If the IJ network device setup utility is not mentioned search the same in your browser to get the right one. • In this way you can find your printer listed. Select your device to get mapped easily into the correct network.

slide 3:

Canon IJ Wireless Setup • For this Canon IJ Wireless Setup few conditions must be satisfied for the WPS Push Button method check the steps mentioned here: • Go through your printer’s guide for WPS details In case of WPS absence on your printer pick the standard connection type and proceed. • Turn on your printer and then press and hold the Wi-Fi button. A blue color appearing on a Wi-Fi impels you to press WPS Button. • Now it’s time to configure your network settings. Load the paper and perform your operation until you find the required count of flashes. • By doing this you find your information gets printed easily in a few steps using the canon IJ wireless setup.

slide 4:

Canon IJ Setup Wi-fi • You can easily setup your canon printer on your iPad iPhone or any device. Use the WPS connection method to make it more simple and easy. Follow the below guidelines for quick setup: • Initially turn on your Canon Printer. • Next press the Wi-Fi button on your Canon printer. Wait until the alarm light flashes. • Now turn towards your access point router and push the WPS button on the access point within a few minutes. • The connection will be established once the Wi-Fi light glows steadily. • Finally take a test print to confirm the stable connection between the printer and the access point.

slide 5:

Canon Utility Free download : https://ij-start-canon.org/