5 Things Consider While Doing Metal Laser Production

Views:
 
Category: Others/ Misc
     
 

Presentation Description

If you have ever been on a road trip, you know the importance of planning. If the required steps are not taken proficiently, the excitement of that trip will fade away and become more like nightmare. The same rule is applicable with metal laser marking and laser production. Planning the steps to be applied to flow and use of best 3d printer in Australia will offer you with some clarity on ways you can improve your functionality.

Comments

Presentation Transcript

Slide1:

5 Things Consider While Doing Metal Laser Production

Slide2:

If you have ever been on a road trip, you know the importance of planning. If the required steps are not taken proficiently, the excitement of that trip will fade away and become more like nightmare. The same rule is applicable with metal laser marking and laser production. Planning the steps to be applied to flow and use of best 3d printer in Australia will offer you with some clarity on ways you can improve your functionality. So, without wasting any further time, let’s just head out towards the things to consider while working on metal laser production or even dealing with 3d printing service in Australia . Layout of the shop: The layout of the shop can make or even break effective plan of production. The more time you invest in parts spend in transit the less efficient you are being. The effect can further turn out to be crippling. Primarily, the incoming material might be loaded directly near laser and secondary operations would be located neater to laser output. The basic objective of layout is to ensure proper flow of work, parts, materials and information .

Slide3:

Proficient maintenance to consider: It can never be stressed enough that if machines are not maintained properly, the entire process can fall apart easily and in an instant. For some of the fabricators out there, the laser maintenance is given. Then you have others, for who, the laser maintenance if out of sight, is out of mind. Most of the time, the fabricators feel more pressured for maintaining uptime than scheduling downtime for the maintenance. You have to stay on top of recommended maintenance activities to use metal laser production at its best. Time for the programming: For shop efficiencies, it is vital to deal with part handling and programming automated materials with ease. With introduction of fibre lasers, automation has become a necessity you cannot deny. Any shop that can manually unload cut sheet will have vast outputs than any shop which will employ automated system.

Slide4:

Time for automation: Advancements in technology keep on providing tools for maintaining and increasing efficiency. Once you have end up optimizing shop layout and performed proper programming, you are set to just stride towards laser automation. If the industrial laser can be well functioned with 50% efficiency, then you are functioning quite well. Standardized cart unloading will create de-nesting bottlenecks, which might delay parts of arriving downstream. Monitoring of the production value: For making some meaningful improvements, you better track and understand all jobs every time. Statistics like transit delays beam on time, maintenance schedules and even process bottlenecks are to be tracked down so that you can end up with continuous improvements. You can further equip some of the laser cutting equipment with production based monitoring option . Make sure to consider these five vital things first, before you end up being a part of the metal laser production house. The more you research, the better you will learn about it .

Slide5:

Original Source: https://infinity3dprintingblog.wordpress.com/2019/03/25/5-things-consider-while-doing-metal-laser-production/

authorStream Live Help