A Way to Get Exam Dumps of Microsoft AZ-101 | Realexamdumps

Category: Education

Presentation Description

It has always been a big challenge for the students to find and select an appropriate and reliable exam material for Microsoft Azure Integration and Security. Our experts have dealt with this challenge and designed a commendable exam material. AZ-101 exam dumps cover all the contents of syllabus for this certification so comprehensively that a student can get a sense of each concept. If you will prepare all the Questions and Answers in the helping material, you will answer each question in the final test confidently and competently. Microsoft Azure Integration and Security exam dumps are available in PDF for a better experience. Demo questions can also be used for a quality test. Realexamdumps has been appreciated with positive feedbacks from the users. Candidates perform more than their expectations after the preparation from our stuff. You can also use online testing engine to check your performance and to make improvements. Testing engine will also work as a simulator. We are also providing guarantee to the users in case of their dissatisfaction with our material. For any further query, you can visit us online at Realexamdumps. https://www.realexamdumps.com/microsoft/az-101-practice-test.html


Presentation Transcript

slide 1:

Microsoft AZ-101 Microsoft Azure Integration and Security https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 2:

Case Study Mix Questions Implement advanced networking Question: 1 HOTSPOT You have an on-premises data center and an Azure subscription. The data center contains two VPN devices. The subscription contains an Azure virtual network named VNet1. VNet1 contains a gateway subnet. You need to create a site-to-site VPN. The solution must ensure that is a single instance of an Azure VPN gateway fails or a single on-premises VPN device fails the failure will not cause an interruption that is longer than two minutes. What is the minimum number of public IP addresses virtual network gateways and local network gateways required in Azure To answer select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Answer: Explanation: Box 1: 4 https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 3:

Two public IP addresses in the on-premises data center and two public IP addresses in the VNET. The most reliable option is to combine the active-active gateways on both your network and Azure as shown in the diagram below. Box 2: 2 Every Azure VPN gateway consists of two instances in an active-standby configuration. For any planned maintenance or unplanned disruption that happens to the active instance the standby instance would take over failover automatically and resume the S2S VPN or VNet-to-VNet connections. Box 3: 2 Dual-redundancy: active-active VPN gateways for both Azure and on-premises networks Explanation: References: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-highlyavailable Question: 2 You have an Azure virtual network named VNet1 that contains a subnet named Subnet1. Subnet1 contains three Azure virtual machines. Each virtual machine has a public IP address. The virtual machines host several applications that are accessible over port 443 to user on the Internet. Your on-premises network has a site-to-site VPN connection to VNet1. You discover that the virtual machines can be accessed by using the Remote Desktop Protocol RDP from the Internet and from the on-premises network. You need to prevent RDP access to the virtual machines from the Internet unless the RDP connection is established from the on-premises network. The solution must ensure that all the applications can still be accesses by the Internet users. What should you do A. Modify the address space of the local network gateway. B. Remove the public IP addresses from the virtual machines. C. Modify the address space of Subnet1. D. Create a deny rule in a network security group NSG that is linked to Subnet1. Answer: D Explanation: https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 4:

You can filter network traffic to and from Azure resources in an Azure virtual network with a network security group. A network security group contains security rules that allow or deny inbound network traffic to or outbound network traffic from several types of Azure resources. Explanation: References: https://docs.microsoft.com/en-us/azure/virtual-network/security-overview Question: 3 You have a public load balancer that balancer ports 80 and 443 across three virtual machines. You need to direct all the Remote Desktop protocol RDP to VM3 only. What should you configure A. an inbound NAT rule B. a load public balancing rule C. a new public load balancer for VM3 D. a new IP configuration Answer: A Explanation: To port forward traffic to a specific port on specific VMs use an inbound network address translation NAT rule. Incorrect Answers: B: Load-balancing rule to distribute traffic that arrives at frontend to backend pool instances. Explanation: References: https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-overview Question: 4 You have an azure subscription that contain a virtual named VNet1. VNet1. contains four subnets named Gatesway perimeter NVA and production. The NVA contain two network virtual appliance NVAs that will network traffic inspection between the perimeter subnet and the production subnet. You need o implement an Azure load balancer for the NVAs. The solution must meet the following requirements: The NVAs must run in an active-active configuration that uses automatic failover. The NVA must load balance traffic to two services on the Production subnet. The services have different IP addresses Which three actions should you perform Each correct answer presents parts of the solution. NOTE: Each correct selection is worth one point. A. Add two load balancing rules that have HA Ports enabled and Floating IP disabled. https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 5:

B. Deploy a standard load balancer. C. Add a frontend IP configuration two backend pools and a health prob. D. Add a frontend IP configuration a backend pool and a health probe. E. Add two load balancing rules that have HA Ports and Floating IP enabled. F. Deploy a basic load balancer. Answer: BCE Explanation: A standard load balancer is required for the HA ports. -Two backend pools are needed as there are two services with different IP addresses. -Floating IP rule is used where backend ports are reused. Incorrect Answers: F: HA Ports are not available for the basic load balancer. Explanation: References: https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-standard-overview https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-multivip-overview Question: 5 You have five Azure virtual machines that run Windows Server 2016. You have an Azure load balancer named LB1 that provides load balancing se You need to ensure that visitors are serviced by the same web server for each request. What should you configure A. Floating IP direct server return to Disable B. Session persistence to Client IP C. a health probe D. Session persistence to None Answer: B Explanation: You can set the sticky session in load balancer rules with setting the session persistence as the client IP. Explanation: References: https://cloudopszone.com/configure-azure-load-balancer-for-sticky-sessions/ Question: 6 You have an Azure subscription that contains a policy-based virtual network gateway named GW1 and a virtual network named VNet1. You need to ensure that you can configure a point-to-site connection https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 6:

from VNet1 to an on-premises computer. Which two actions should you perform Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. A. Reset GW1. B. Add a service endpoint to VNet1. C. Add a connection to GW1. D. Add a public IP address space to VNet1. E. Delete GWL F. Create a route-based virtual network gateway. Answer: EF Explanation: E: Policy-based VPN devices use the combinations of prefixes from both networks to define how traffic is encrypted/decrypted through IPsec tunnels. It is typically built on firewall devices that perform packet filtering. IPsec tunnel encryption and decryption are added to the packet filtering and processing engine. F: A VPN gateway is used when creating a VPN connection to your on-premises network. Route-based VPN devices use any-to-any wildcard traffic selectors and let routing/forwarding tables direct traffic to different IPsec tunnels. It is typically built on router platforms where each IPsec tunnel is modeled as a network interface or VTI virtual tunnel interface. Incorrect Answers: D: Point-to-Site connections do not require a VPN device or a public-facing IP address. Explanation: References: https://docs.microsoft.com/en-us/azure/vpn-gateway/create-routebased-vpn-gateway-portal https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-connect-multiple-policybased-rm- ps Question: 7 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution while others might not have a correct solution. After you answer a question in this section you will NOT be able to return to it. As a result these questions will not appear in the review screen. You have an Azure web app named App1. App1 runs in an Azure App Service plan named Plan1. Plan1 is associated to the Free pricing tier. You discover that App1 stops each day after running continuously for 60 minutes. You need to ensure that App1 can run continuously for the entire day. Solution: You add a continuous WebJob to App1. Does this meet the goal A. Yes B. No https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 7:

Answer: B Question: 8 You have an Azure Logic App named App1. App1 provides a response when an HTTP POST request or an HTTP GET request is received. During peak periods App1 is expected to receive up to 200000 requests in a five-minute period. You need to ensure that App1 can handle the expected load. What should you configure A. Access control IAM B. API connections C. Workflow settings D. Access keys Answer: C Explanation: References: https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-limits-and-configthroughput-limits Question: 9 DRAG DROP You have an on-premises network that includes a Microsoft SQL Server instance named SQL1. You create an Azure Logic App named App1. You need to ensure that App1 can query a database on SQL1. Which three actions should you perform in sequence To answer move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 8:

Answer: Explanation: To access data sources on premises from your logic apps you can create a data gateway resource in Azure so that your logic apps can use the on-premises connectors. Box 1: From an on-premises computer install an on-premises data gateway. Before you can connect to on-premises data sources from Azure Logic Apps download and install the on-premises data gateway on a local computer. Box 2: From the Azure portal create an on-premises data gateway Create Azure resource for gateway After you install the gateway on a local computer you can then create an Azure resource for your gateway. This step also associates your gateway resource with your Azure subscription. Sign in to the Azure portal. Make sure you use the same Azure work or school email address used to install the gateway. https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 9:

On the main Azure menu select Create a resource Integration On-premises data gateway. On the Create connection gateway page provide this information for your gateway resource. To add the gateway resource to your Azure dashboard select Pin to dashboard. When youre done choose Create. Box 3: From the Logic Apps Designer in the Azure portal add a connector After you create your gateway resource and associate your Azure subscription with this resource you can now create a connection between your logic app and your on-premises data source by using the gateway. In the Azure portal create or open your logic app in the Logic App Designer. Add a connector that supports on-premises connections for example SQL Server. Set up your connection. Explanation: References: https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-gateway-connection Question: 10 You have a Basic App Service plan named ASP1 that hosts an Azure App Service named App1. You need to configure a custom domain and enable backups for App1. What should you do first https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 10:

A. Configure a WebJob for App1. B. Scale up ASP1. C. Scale out ASP1. D. Configure the application settings for App1. Answer: D Question: 11 You have an Azure App Service plan named AdatumASP1 that hosts several Azure web apps. You discover that the web apps respond slowly. You need to provide additional memory and CPU resources to each instance of the web app. What should you do A. Scale out AdatumASP1. B. Add continuous WebJobs that use the multi-instance scale. C. Scale up AdatumASP1. D. Add a virtual machine scale set. Answer: C Explanation: References: https://github.com/MicrosoftDocs/azure-docs/blob/master/articles/app-service/web-sites-scale.md Question: 12 HOTSPOT You have an Azure web app named App1 that has two deployment slots named Production and Staging. Each slot has the unique settings shown in the following table. You perform a slot swap. What are the configurations of the Production slot after the swap To answer select the appropriate options in the answer area. NOTE: Each correction is worth one point. https://www.realexamdumps.com/microsoft/az-101-practice-test.html

slide 11:

Answer: Explanation: Swapping the slots means the destination slot website URL will run source slot code with destination slot settings. https://www.realexamdumps.com/microsoft/az-101-practice-test.html

authorStream Live Help