UHF RFID parking access control system

Views:
 
     
 

Presentation Description

No description available.

Comments

By: Mohamed31186 (124 month(s) ago)

Thanks

By: annil (130 month(s) ago)

Hyintech’ s UHF RFID also offers a turnkey solution for parking operators that require the ability to monitor and record not only access and exit to parking facilities but also log and bill back parking charges by customer. This solution is ideal for operators that have a subscribed-base of users that pay on an annual, monthly, weekly, daily or per stay basis. You can now monitor the peak utilization of your parking facility and recover costs based on actual usage by your customers.

By: annil (130 month(s) ago)

Hyintech’ s UHF RFID also offers a turnkey solution for parking operators that require the ability to monitor and record not only access and exit to parking facilities but also log and bill back parking charges by customer. This solution is ideal for operators that have a subscribed-base of users that pay on an annual, monthly, weekly, daily or per stay basis. You can now monitor the peak utilization of your parking facility and recover costs based on actual usage by your customers.

By: oprfideva (132 month(s) ago)

complete solution of RFID service We offer contact smart cards, contactless cards, UHF products, wristbands, key tags, laundry tags, coin disc tags, animal tags are all our extensive products list. All these items can be modified to suit your makret needs. Welcome to www.oprfid.com to know about our infromation. Inquire today and we will respond within 24 hours. Eva OPRFID Technologies., LTD 2-603 Room, Hong Feng Jia Yuan , 270# BeiMo Street Chengxiang Putian City, Fujian,P.R ,China Email: [email protected] MSN: [email protected]

Presentation Transcript

Slide 1: 

UHF RFID parking access control system

Slide 2: 

System includes:1. 2 barrier gates(built-in vehicle detector & loop wires) with 3 meter boom(could change to folding arm or fence arm)2. 2 sets of 4-6 meters UHF RFID readers(FCC ISM 902-928MHz or ETSI 865.6-867.6MHz) 3. 1 parking control panel & software4. Power supplies & RS232/RS485 converter 5. 100 Passive EPC G2 anti-tear off stickers(attached inside of the windscreen, note there should be no anti-sunshine film in front of the location of the sticker)6. Software is English interface, and can be translated into any language upon requestConnections:1. The parking controller connect with 4-6 meter reader via wiegand262. The parking controller connect with barrier gate via relay/switching signal3. The parking controller connect with PC/Software via serial RS232Operation process:1. User drives the vehicle approaching the barrier gate( the tag/sticker attaches on windscreen or windshield rain wiper),2. The UHF RFID reader detects the tag/sticker when it is in 4-6 meters range,3. The barrier gate will be opened automatically, 4. The vehicle enters or exits,5. All access history will be stored in database for later analysis. Note:  1. The system can work with no PC by parking controller working in standalone mode.           2. Please make sure no anti-sunshine film(tint film) in front of the windscreen at the card location

Slide 3: 

Available functions(need to add hardware):1. Plate Number picture capture2. Parking ticket printer3. Receipt ticket printer4. Parking payment management5. LED for due amount display & Full/available signWorking environment:1. Software is WIN XP, SQL2000 based,2. Temperature: -35℃-75℃,3. Power consumption: 220V 120W(Barrier gates), 12V 100W(RFID Reader), 12V 1A(Parking controller)4. Warranty: 3 yearsPackage information:1. 2 wooden cases for barrier gates, 105*40*40cm per unit, 65kg per unit,2. 1 wooden case for boom of barrier gate, 310*10*10cm, 6kg,3. 2 cartons for UHF RFID readers & tags: 25*25*5cm, package weight:4.5kg, net weight:0.8kg,4. 1 small box for parking control panel & software discTotal dimension: less than 0.4cbm,Total weight: 145kg, This information is for shipment calculation.

Slide 4: 

Tips for using UHF RFID Parking Solution:We have four types of tags for your purchase options Standard Card/tag, Size: 86*54*1.0mm, Material: PVC, ABS optional

Slide 5: 

Sticker, Size options:  54*85.6, Material: paper, PI, Option: anti-tear off (self destroy) Windshield wiper attached tag, Size:201(L)*12(W)*13 (H)mm, Material: ABS

Slide 6: 

Plate attached tag, Size:244(L)*13(W)* 11(H)mm, Material: ABS Reader’s location diagram

Slide 7: 

Reader’s angle adjustment Tag/sticker’s location on windscreen( with no anti-sunshine film ) Description: 1. The tag/sticker should be attached on the location close to the reader installed on lane,2. For small vehicle( car ) use, location A, B, C is preferable,3. For big vehicle( truck ) use, location D, E, F is preferable

Slide 8: 

Supplement: For windscreen with anti-sunshine film, 1. For pre-attached windscreen film, there is a 120*70mm reserved cut for use of RFID tag at location B, tag/sticker could be attached here,2. For after-attached windscreen film, user could require installer to make a cut ( 120*70mm ) at location A, B, C, D, E. F, and attach tag/stick here,3. Or metal tag could be recommended, such as plate tag, or windshield wiper tag ( mounted on windshield wiper ), 4. Or manually show the tag/card to the reader as shown as picture above, Correct Wrong

Slide 9: 

Make sure no anti-sunshine film on windscreen, buy card holder to hold the card and adhere the card holder on the windscreen

Slide 10: 

UHF RFID Card parking system(Active RFID card)

Slide 11: 

The reader is 433MHz active RFID Detecting distance up to 30 meters Built-in infrared scanner, only being activated when 433MHz card entering into its detecting rangeCould penetrate metal contained sunshine proof film( or metal plate which is transparent) on windscreen of vehicleEasy to adjust detecting distance by reader being pan/tiltWiegand 26, Wiegand 34, RS485(active), RS485(passive) output Hybrid tag433MHz card could be combined with EM4100 compatible card, could transmit: 1.433MHz card No. only, 2. EM4100 Card No. only, 3. 433MHz card No.+ EM4100 card No, This is for the application which need separate identification of the driver and vehicle at the same time

Slide 12: 

Hybrid card’s purpose Under the mode of transmission of 433MHz No.+ EM4100 card No. , driver could take out the EM4100 card when he get off the vehicle, so even someone want to drive the car but he can not drive to exit the parking lot because he doesn’t have the EM4100 card No. This mode could help system to identify when and who is driving which vehicle to pass through the barrier gate, the barrier gate will open/close automatically only when all the information is correct.

Slide 13: 

Hybrid card’s purpose

Slide 14: 

Features 1. Penetration, able to penetrate metal contained anti-sunshine film on vehicle, the active label could be decoded automatically without rolling down the vehicle window. 2. Direction, combined with infrared scanner, targeted direction, decoding only within 80° angle.3. Auto adjustment, auto adjust parameters of signal sent from the card, adapt to various of environments. 4. Indoor and outdoor application optional. 5. Interference resistance, adopts DIP Address setup, CDMA technologies, no interference when no infrared scanning area being overlapped.  6. Environment protection, 433MHz RFID reader has no electromagnetic radiation in stand by mode. 7. Stable reading range, no attenuation within reading area, from 3 to 30 meters8. Compatibility, Wiegand 26, Wiegand 34, RS485(Active), RS485(Passive). 9. DIP switch, including communication type, vehicle detector, time lag of transmission of the card code, SN setup. 10. IP65 design.

Slide 15: 

When replacing the battery, place the bottom side upside, press battery clip on the left and take the  batteries out, put the new batteries with positive side upside into the slot and insert the battery clip as the picture above.

Slide 16: 

parking barrier gate 1. Bar type: boom, folding arm, fence arm

Slide 17: 

90° folding arm 180° folding arm 2. Boom length: 3-6 meters, speed: 3 sec for <4.5m, 6 sec for >4.5m    Folding arm: 3-5 meters, speed: 5-6 sec    Fence arm: 4-4.5 meters, speed: 6 sec

Slide 18: 

2-layer fence arm 3-layer fence arm

Slide 19: 

3. Speed: 4 sec & 6 sec options. 4. Dimension: 329×301×952mm5. Weight: 65kg/143lbs6. Power supply: AC220V 60Hz(default), or AC110V 50Hz7. Power of motor: 120W8. Working temperature: -20-65℃9. IP 44 cabinet Accessories come with barrier gate Clutch: to raise the barrier gate when power failure

Slide 20: 

Wireless remote transceiver wireless remote receiver Vehicle detector

RFID Solutions for Parking Control : 

RFID Solutions for Parking Control

authorStream Live Help