Category: Education

Presentation Description

No description available.


Presentation Transcript

Slide 1:

Slide 2: 

Archaeology 2010 By Anbr Cama

What is archaeology? : 

What is archaeology? The scientific study of the physical evidence of past human societies recovered through the excavation. Archaeologists not only attempt to discover and describe past cultures, but to explain the development of these cultures.

How is a site chosen? : 

How is a site chosen? Our site was chosen based on: A. artifacts already found on the surface B. history of the area (from sources or even land owner)

What is a unit? : 

What is a unit? A unit is a square in which an archaeologist has chosen to dig or search for artifacts.

Setting up a unit : 

Setting up a unit Your unit will be a “2x2.” You start with two sides that need to measure 200 cm. Using the Pythagorean Theorem, you will find the hypotenuse to be 283 cm., your measurement from corner to corner across the middle. Using this method you can be sure all sides of the unit will be 200 cm

Once you have these measurements, you will have a perfect square for your unit… IF you measure it correctly. Then the REAL fun begins…

Tools of the trade… : 

Tools of the trade… There are several tools you can use when looking for artifacts. Some of them are… a spade, a shovel, a trowel, a measuring tape, a bamboo pick, a pencil, a file, a paint brush and clippers.

Slide 9: 

AND don’t forget the sunscreen and bug spray!!!!

Removing the Plow Zone : 

First using shovels and spades, you need to remove the plow zone, which reaches about 25 cm below the surface. Keep your eyes peeled for artifacts such as flakes that can be found in the plow zone! Removing the Plow Zone

Slide 11: 

Once the plow zone is removed, you may find changes in the soil color. These are called stains. Once a stain is found, you can be sure you have discovered a feature within the unit and then you can get down and DIRTY!!!!!!!!! There is a chance you will find artifacts below this…

Working at a dig site… : 

Working at a dig site… To begin excavating your feature you will need to CAREFULLY remove the soil 5 cm. at a time. Each 5 cm of soil is called a level.

Slide 13: 

During this process you can see the best side of a lot of people Not again…

Slide 14: 


The MATRIX!!! : 

The MATRIX!!! Before you begin troweling away each 5 cm level, you need to take a matrix or sampling of soil. This is done using your trowel to “chunk” the soil out of the level.

Slide 16: 

This matrix is taken back to MVAC where it is dried and then rinsed through screens for items like small bones or flakes or charcoal. This can help give more information about the site and the people who once occupied it.

Slide 17: 

Any soil you remove from a feature is screened. That way any artifacts too small to be seen or mixed in with the soil you excavate don’t get away!!!

Slide 18: 

When you think you have found something, yell loudly, “I found something!” and someone will come to either confirm your find or tell you it’s just dirt and crush it between their fingers…

Slide 19: 

Certain artifacts will need to be left “in situ” as they may continue into the next level. Some you may need to pedestal or leave dirt underneath it and then map it. Then you will need to use your handy bamboo pick and paintbrush to remove the dirt. Even though you may be tempted to just “yank that puppy out of there” – DON’T DO IT!!!!!!!!!! Removal of an artifact needs to be done very carefully!!!!!!

Finding artifacts : 

Finding artifacts After you remove an artifact, you need to put it into a correctly labeled plastic bag. The artifacts will be taken back to MVAC to be washed and cataloged.

Slide 22: 

After you have removed a level or 5 cm of soil from the feature, you need to map what you have found whether it is the stain in the soil or artifacts in that level. One or two people measure and someone records these measurements on grid paper.

Slide 23: 

After mapping the feature, you then need to photograph it for permanent record of what feature looks like. You use a photo board with the site number, feature number, and other important information plus an arrow pointing to true north.

Slide 24: 

Then you can start the whole process all over again… Until you reach sterile soil… or China…

Slide 25: 

Many interesting artifacts have been found at dig sites. It is very exciting to be a part of an archaeology dig BONE!!!!

Slide 27: 


Slide 28: 

Can you dig it?

Slide 29:

authorStream Live Help