Standard Liquid Flowmeter - Proteus Industries

Views:
 
Category: Entertainment
     
 

Presentation Description

www.proteusind.com - Standard Liquid FlowMeter : The standard liquid flowmeter is used in various fields and has significant utility. In the medical field, industrial sector, like food processing, semiconductor fabrication, water management, etc.

Comments

Presentation Transcript

Slide 1:

Different Types of Standard Liquid Flow Meter

Slide 2:

Instruments that are used for measuring the flow rate of a particular liquid, flowing through a pipe, are called flow meters. The measurements can be done based on either the mass flow rate or the volumetric flow rate and the units in which it is measured are kilogram per second and liters per second respectively. The standard liquid flow meter is used in various fields and has significant utility. In the medical field, industrial sector, like food processing, semiconductor fabrication, water management, etc. Introduction

Slide 3:

The flow of any liquid can be classified into open or closed pipe flow. The open channel in the free-flowing stream is not restricted by any wall and the flow is controlled by the force of gravity. The fluid flow in the closed channel occurs due to the pressure difference in the pipeline. Open & Closed Channel Flow

Slide 4:

With the negligible use of the mechanical parts, the maintenance of these flow meters is very low and has the advantage of measuring any kind of liquid with no hassle. The clamp-on version of these flow meters is to be snapped outside the pipe, providing a non-intrusive installation. The output is of these meters is generally very accurate. Ultrasonic Flow Meters

Slide 5:

These are the conventional devices, with either turbines or wheels inserted in the conduits to calculate the velocity and the volumetric flow with the help of the location of the pipe. They can be categorized into piston meter, single jet meter, and gear meter. Piston meter uses rotating pistons whereas gear meter uses two or more gears, which rotate perpendicular to each other and the single jet meter applies the impellers to measure the flow. Mechanical Flow Meters

Slide 6:

Either differential pressure or dynamic pressure determines the rate of the flow. While using the differential pressure, the pipe is constricted to decrease the pressure, as with the further introduction of liquid, the pressure hikes. The flow rate is concluded by the pressure difference between the inlet and outlet valve. Pressure Flow Meters

Slide 7:

As the name suggests, the flow rate is determined by the magnetic field created by the magnets in the pipe, which with the help of the conductive components of the fluid alters the voltage. This change in voltage is used to determine the flow rate. These are suitable for water, or water-based liquids like wastewaters. They can’t be used in oil, hydrocarbon, and distilled water. Electromagnetic Flow Meters

Slide 8:

Proteus Industries Inc. 340 Pioneer Way Mountain View California USA 94041 , (650) 943-4127 (650) 965-9355 [email protected] Technical Support David Chiasson (650) 943-4111 Mark Malfatti (650) 943-4127 Alex Gahrahmat (650) 943-4158 Customer Service Wiki Fragio   (650) 943-4110 Dana Laing  (650) 943-4106 Ruth Ricacho   (650) 943-4135 Contact Us

Slide 9:

www.proteusind.com

authorStream Live Help