Power Quality Tools

Views:
 
     
 

Presentation Description

Fluke offers an extensive range of power quality test tools for troubleshooting, preventive maintenance, and long-term recording and analysis in industrial applications and utilities.

Comments

Presentation Transcript

Process Tools A Growing Family:

Process Tools A Growing Family Performance Price Pressure Loop Temperature Documenting Multifunction Intrinsic Safe ProcessMeters

“Does the Customer work on 4 - 20 mA loops?“:

“Does the Customer work on 4 - 20 mA loops?“ Loop 24V Loop 24V

Loop Tools Do you work on 4-20 mA loops?:

Loop Tools Do you work on 4-20 mA loops? Fluke Loop Tools are reliable, rugged and accurate Required for basic maintenance of analog process loops 787 and 789 - World’s only 1000V IEC1010 Cat III DMMs with 20mA Current Source 715 - Our highest precision portable mA/V source 705 - Lowest cost, best in class performance 707 and 707Ex – High Performance one handed operation. Intrinsic safe (707Ex)

Fluke 771 mA Process Clamp Meter:

Fluke 771 mA Process Clamp Meter Measure mA signals without breaking the loop Best in class mA measurement accuracy and resolution Save time and money troubleshooting PLC analog I/O and process loops Detachable clamp with extension cable Dual display with both mA and % of span readouts Measurement spotlight illuminates hard to see wires. Measure 4-20 mA signals without breaking the loop. Innovative approach to measuring mA loop signals

Introducing the new Fluke 772 and 773:

Introducing the new Fluke 772 and 773 Fluke-771, 772 and 773 all: “Measure 4 to 20 mA signals without breaking the loop” 772 features 771 users requested: mA source and simulate 24V loop power 773 adds (to 772 baseline): Voltage source and measure Two channel operation Simultaneous mA source/measure Analog output representing signal measured by clamp Enables logging to an external DMM These new features make up-selling easy from the 771

Fluke-787 and 789 ProcessMeter:

Fluke-787 and 789 ProcessMeter Additional Fluke 789 Features: 24 V Loop supply 100% larger dual display Selectable HART mode mA drive up to 1200 ohms (500 ohms on 787) Zero and span buttons (0-100%, mA output) Easier calibration support Infrared remote, use with Fluke-View Forms Fluke 787 Key Features: Cat III 1,000 V Safety rated DMM Fully functional 1000 V, RMS AC Voltmeter mA source and simulate mA step, auto-step and auto-ramping Dual mA and % display External battery door

PowerPoint Presentation:

Best Under Pressure Fluke Pressure calibrators and gauges built for a tough world

Pressure Tools Do you work on pressure transmitters, switches, gauges?:

Pressure Tools Do you work on pressure transmitters, switches, gauges? Excellent pressure transmitter calibration solutions Switch test function saves time and makes a difficult task easy 718 World’s lightest pressure calibrator with built-in pump 717-1G to 10,000G Cost effective field solutions for a variety of applications 29 highly precise digital modules extend range and capability 718Ex; Intrinsic Safe Pressure calibration with a CSA I.S. Class I, Div. 2 Group A-D certification New 700G series Gauges in 9 ranges from 15 psi to 10,000 psi

Fluke 717 Pressure Calibrator:

Fluke 717 Pressure Calibrator 11 ranges for broad workload coverage (15 PSI, 10,000 PSI new) 0.025% Accuracy 1/8 NPT pressure fitting Non-corrosive gases and liquids Extend measurement range with one of Fluke’s 29 digital pressure modules mA measure with loop supply Integrated pressure switch test Model Description FLUKE-717 1G PRESSURE CALIBRATOR 1 PSIG FLUKE-717 15G PRESSURE CALIBRATOR 15 PSIG FLUKE-717 30G PRESSURE CALIBRATOR, 30 PSIG FLUKE-717 100G PRESSURE CALIBRATOR, 100 PSIG FLUKE-717 300G PRESSURE CALIBRATOR 300 PSIG FLUKE-717 500G PRESSURE CALIBRATOR 500 PSIG FLUKE-717 1000G PRESSURE CALIBRATOR 1000 PSIG FLUKE-717 1500G PRESSURE CALIBRATOR 1500 PSIG FLUKE-717 3000G PRESSURE CALIBRATOR 3000 PSIG FLUKE-717 5000G PRESSURE CALIBRATOR 5000 PSIG FLUKE-717 10000G PRESSURE CALIBRATOR 10000 PSIG

Fluke 718 Pressure Calibrator:

Fluke 718 Pressure Calibrator 4 ranges, 1, 30, 100, 300 PSI 0.025% Accuracy Measure mA and pressure simultaneously Integrated switch test 24V loop supply Integrated pressure switch test Extend measurement range with one of Fluke’s 29 digital pressure modules (8 I.S. pressure modules) Pump up the pressure Model Description FLUKE-718 1G PRESSURE CALIBRATOR 1 PSIG FLUKE-718 30G PRESSURE CALIBRATOR 30 PSIG FLUKE-718 100G PRESSURE CALIBRATOR 100 PSIG FLUKE-718 300G PRESSURE CALIBRATOR 300 PSIG FLUKE-718EX 30 I.S. PRESSURE CALIBRATOR 30 PSIG FLUKE-718EX 100 I.S. PRESSURE CALIBRATOR 100 PSIG FLUKE-718EX 300 I.S. PRESSURE CALIBRATOR 300 PSIG FLUKE-71X HOSE KIT ACCESSORY

Fluke 719 Electric Pressure Calibrator:

Fluke 719 Electric Pressure Calibrator Eliminates the hassle of hand pumping Electric pump makes a difficult task simple Best in class pressure and mA 0.025% accuracy for pressure 0.015% for mA Feature rich: Fully functional loop calibrator Pressure switch test Uniquely targeted for pressure troubleshooting professional

PowerPoint Presentation:

New Fluke 700G Series Test Gauges Nine pressure ranges from 15 PSI (1 bar) to 10,000 PSI (690 bar) High accuracy; 0.05% total uncertainty for one year Ease of use and ergonomic design help make pressure calibration easy Work in areas classified to include explosive gasses, CSA and ATEX ratings Log measurements in the field for upload to a PC using optional 700G/TRACK software Rugged construction, reliable performance Best in class 3-year Fluke warranty

PowerPoint Presentation:

Why choose Fluke pressure gauges? Rugged ergonomic design, built to last Three year warranty proves Fluke stands behind these gauges Most other gauges in this class have 1-year warranty High accuracy promises dependable calibration results Simple and easy to use, get started without needing to read the manual Option to buy logging software promises advanced features if desired

PowerPoint Presentation:

700G/TRACK Logging Software 700G/TRACK software enables the 700G series gauges to log pressure measurements both in the field and in the lab Demand logging direct to a PC Configure gauges for a logging event in the field Upload field logged measurement to a PC Includes special PC to gauge cable

PowerPoint Presentation:

For a complete pressure testing solution, add a test pump kit Fluke-700PTPK Pneumatic test kit Combine with any Fluke-700G04 to 700G07 to make a complete pressure testing kit Generate pressure up to 600 PSI, 40 bar with the 700PTP-1 test pump. Fluke-700HTPK Hydraulic test kit Combine with any Fluke-700G08 to 700G31 to make a complete pressure testing kit Generate pressure up to 10,000 PSI, 700 bar with the included 700HTP-2 test pump Both kits include connection hoses and fittings. Leave the gauge connected to the pump and stow in the protective case

Pressure modules:

Pressure modules 29 modules with full-scale values from 1" H 2 0 to 700 bar 0.025% Accuracy, fully temperature compensated from 0°C to 50°C 8 modules with IS rating Measures Gage, Absolute, Vacuum and Dual Pressures Single or differential input configurations Interchangeable from calibrator to calibrator Complete traceability is maintained

Achieving exceptional performance:

Achieving exceptional performance Pressure sensors are very temperature sensitive Modeling each sensor mathematically allows Fluke to remove most of the temperature error each module contains a unique characterization stored in the module

Fluke 726 Precision Multifunction Process Calibrator Do you need to calibrate temperature and pressure? Do you need precision?:

Fluke 726 Precision Multifunction Process Calibrator Do you need to calibrate temperature and pressure? Do you need precision? Best accuracy in a MPC Wide workload coverage Pressure enabled Easy to use (2) times more accurate than the 725 Totalize frequency Store calibration to memory Calibrate almost anything!

Intrinsically Safe Calibrators:

Intrinsically Safe Calibrators For use in areas classified with the presence of explosive gasses 718Ex and 725Ex utilize the (8) 700PEx pressure modules Same basic functionality as the standard versions

Documenting Process Calibrators, Fluke-753 and 754 Do you need to document your field calibrations?:

Documenting Process Calibrators, Fluke-753 and 754 Do you need to document your field calibrations? Source / measure all process parameters Powerful, yet easy to use Capture and document results Support popular software Truly handheld Rugged and reliable Upload to PC (753 and 754) HART Capability (0nly for 754)

Measure and Source Capabilities :

Measure and Source Capabilities Measure Accuracy Volts DC 0-300V 0.025% + 0.015% FS Volts AC 0-300V 0.5% + 5 counts mA 0-110mA 0.01% Freq. 1-50Khz 5 counts + 0.015% FS TC ENJLKTUBRSC 0.03 Deg C Ohms 0-11,000 0.05% + 5 counts RTD Pt100..1000,Cu, .03 Deg C Pressure 29 modules 0.05% of range Source Accuracy Volts DC 0-15V 0.01% + 0.005% FS mA 0-22mA 0.01% + 0.015% FS Freq. 0-50Khz 1 count TC ENJLKTUBRSC 0.2 Deg C Ohms 0-11,000 ohms 0.01% + 4 counts RTD Pt100..1000, 0.02 Deg C Loop Pwr 26 volts

PowerPoint Presentation:

Company Name : Fluke Corporation - India Website: http://www.fluke.com/fluke/inen/home/default.htm Address: Division of DHR Holding India Pvt. Ltd. 10th Floor, Sigma Hiranandani Business Park, Powai Mumbai, Maharashtra 400076 Contact Number : 1 800 209 9110

authorStream Live Help