Some Important Kitchen Cabinet Installation Tips

Views:
 
     
 

Presentation Description

http://millerscasework.com/commercial-cabinets/cabinet-manufacturer/ ..... The process of installing kitchen cabinet is very easy but the confusing part is to scope out the space to ensure that everything adjusts and compensate for walls and floors that are not always in square or level.

Comments

Presentation Transcript

Some Important Kitchen Cabinet Installation Tips:

Some Important Kitchen Cabinet Installation Tips

Slide2:

The process of installing kitchen cabinet is very easy but the confusing part is to scope out the space to ensure that everything adjusts and compensate for walls and floors that are not always in square or level.

6 tips to install your kitchen cabinet:

6 tips to install your kitchen cabinet

Tip 1:

Tip 1 Always find the highest spot The first job should always be to find the high spot for layering the cabinets because cutting is tuff task than shimming. You might have seen in old designed houses that very fewer kitchen floors are made well straight.

Tip 2:

Tip 2 Start from the corners Mark the cabinet location at the base of the wall to ensure everything is accurately aligned. The sink cabinet should be in the center of a window, lay that first or else work from corner to middle. For adjusting spacing and make slight out of plumb use filler strips in the middle, base, and end of the wall cabinets.

Tip 3:

Tip 3 Take the measurement from to down Cabinet includes full height tall panel, use it to set the height of your wall cabinet. Take the measurement from the highest spot on the ground and level it where the cabinet top will fall. Now measure the total height of your cabinet and level it on the horizontal line. The meeting of both the lines will establish the upper and bottom line of your cabinet.

Tip 4:

Tip 4 Minimize your drywall repair Before you install the drywall mark the place for any sort of the wiring to ensure that you do not have to dig a hole later on. Instead of locating the marking precisely always mark them a couple of inches high. This way whenever you will hang your kitchen cabinet you can easily slide the required wires and perfectly aligned them in the mounting rail.

Tip 5:

Tip 5 Hang the upper cabinet first Always start by hanging the wall cabinet because you can get the step ladder which makes it easy to hold and list cabinet in proper position during the fastening and alignment.

Slide10:

Tip 6 Start plumbing and keep it that way Kitchen cabinets are installed in level and plumbed. When the walls are out of plumb you can easily fill the gap. Therefore, the accurate layout of a cabinet will give enough space to fill the strip and match the irregularity.

Slide12:

Miller's Casework specializes in both in commercial and residential cabinetry services. We are experienced team offer expertise in commercial cabinet installation as per the customer requirement. Contact 931-739-9292 for booking an appointment or to request no coast quotation or you can visit our website

Slide13:

Miller’s Casework 390 Bennett Rd. Sparta, TN 38583 Phone:  (931) 739-9292 Hours of Operation Monday – Friday 9:00am – 5:00pm Email:   [email protected] http://millerscasework.com/commercial-cabinets/cabinet-manufacturer/

authorStream Live Help