GMP REGULATIONS FOR MANUFACTURE AND PACKAGING OPERATIONS

PowerPoint Presentation: 

GMP REQUIREMENTS FOR MANUFACTURE AND PACKAGING OPERATIONS MD.YUNOOS Assistant Professor Nimra College of Pharmacy MOHAMMAD YUNOOS

PRINCIPLE: 

PRINCIPLE Production operations must follow clearly defined procedures and principles of GMP in order to obtain products of the required quality and be in accordance with the relevant manufacturing and marketing authorizations. MOHAMMAD YUNOOS

Manufacturing area: 

Manufacturing area MOHAMMAD YUNOOS

GMP- MANUFACTURING AREA: 

GMP- MANUFACTURING AREA Production should be performed and supervised by competent people. All handling of materials and products, such as dispensing , sampling, storage, labelling, processing, packaging and distribution should be done in accordance with written procedures or instructions and recorded. All incoming materials should be checked to ensure that the consignment corresponds to the order. Containers should be cleaned and labelled with the prescribed data. MOHAMMAD YUNOOS

GMP- MANUFACTURING AREA: 

GMP- MANUFACTURING AREA All materials and products should be stored under the appropriate conditions established by the manufacturer and in an orderly fashion to permit batch segregation and stock rotation. Checks on yields and reconciliation of quantities, should be carried out to ensure that there are no discrepancies outside acceptable limits. Operations on different products should not be carried out simultaneously or consecutively in the same room unless there is no risk of mix-up or cross-contamination. MOHAMMAD YUNOOS

GMP- MANUFACTURING AREA: 

GMP- MANUFACTURING AREA During processing, all materials, bulk containers, major equipments and where appropriate rooms used should be labelled or identified with an indication of the product or material being processed by its strength and batch number and stage of production. Labels applied to containers, equipment or premises should be clear, unambiguous and in the company’s agreed format (use colours to indicate status for quarantined, accepted, rejected, clean). Access to production premises should be restricted to authorized personnel . MOHAMMAD YUNOOS

PowerPoint Presentation: 

MOHAMMAD YUNOOS

Manufacturing area: 

Manufacturing area MOHAMMAD YUNOOS

PREVENTION OF CROSS-CONTAMINATION IN PRODUCTION: 

PREVENTION OF CROSS-CONTAMINATION IN PRODUCTION Contamination of a starting material or product by another material or product must be avoided. This risk of accidental cross-contamination arises from the uncontrolled release of dust, gases, vapours, sprays or organisms from materials and products in process, from residues on equipment, and from operators’ clothing. Cross-contamination should be avoided by: Production in segregated areas Providing appropriate air-locks Minimizing the recirculation or re-entry of untreated air Keeping protective clothing Using cleaning procedures of known effectiveness Testing for residues and use of cleaning status labels on equipment. MOHAMMAD YUNOOS

Processing procedure : 

Processing procedure Production area and testing equipment should be cleaned, sterilized and maintained in accordance with specific written instructions. Process area should be free from any starting materials, products, product residues or documents not required for the current operation. Processing should be carried out in accordance with the master formula. Steps that are critical for the quality of the active pharmaceutical ingredient should be defined and the procedures applied should be validated. MOHAMMAD YUNOOS

Processing procedure: 

Processing procedure Processing should be supervised and performed by competent persons. Information on the daily activities in each processing should be documented. Any deviation from instructions or procedures should be reported, approved and recorded. MOHAMMAD YUNOOS

batch manufacturing record: 

batch manufacturing record Name of the Product Dates and times of commencement of the different stages of production Name of the person responsible for each stage of production Production details including reference to the main equipment used and product yields obtained at different stages of operation. Batch or reference number (or analytical control number) Record of the in-process controls followed and the results obtained Details of signed authorization for, any deviation from the master formulae. MOHAMMAD YUNOOS

batch manufacturing record: 

batch manufacturing record Initials of the operators and signature of the person responsible for the production operations and the date of signature All analytical records relating to the batch A decision for the release or rejection of the batch with the date and signature of the person responsible for the decision Production record review MOHAMMAD YUNOOS

PACKAGING: 

PACKAGING There should be approved Packaging Instructions for each product, pack size and type. Before any packaging operation begins, there should be recorded checks that the equipment and work station are clear of previous products, documents or materials not required for the current packaging operations, and that equipment is clean and suitable for use. Records should be entered at the time each action is taken and, after completion, the record should be dated and signed in agreement by the person(s) responsible for the packaging operations. MOHAMMAD YUNOOS

PACKAGING OPERATIONS: 

PACKAGING OPERATIONS To minimizing the risk of cross-contamination, mix-ups or substitutions. Different products should not be packaged in close proximity unless there is physical segregation. Before packaging operations are begun, steps should be taken to ensure that the work area, packaging lines, printing machines and other equipment are clean and free from any products, materials or documents previously used, if these are not required for the current operation. The line clearance should be performed according to an appropriate check-list. MOHAMMAD YUNOOS

PACKAGING OPERATIONS: 

PACKAGING OPERATIONS The name and batch number of the product being handled should be displayed at each packaging station or line. All products and packaging materials to be used should be checked on delivery to the packaging department for quantity, identity and conformity with the Packaging Instructions. Containers for filling should be clean before filling. Attention should be given to avoiding and removing any contaminants such as glass fragments and metal particles. MOHAMMAD YUNOOS

PACKAGING OPERATIONS: 

PACKAGING OPERATIONS Filling and sealing should be followed as quickly as possible by labelling. If it is not the case, appropriate procedures should be applied to ensure that no mix-ups or mis-labelling can occur. The correct performance of any printing operation (for example code numbers, expiry dates) to be done separately or in the course of the packaging should be checked and recorded. Attention should be paid to printing by hand which should be re-checked at regular intervals. Special care should be taken when using cut-labels and when over-printing is carried out offline. Roll-feed labels are normally preferable to cut-labels, in helping to avoid mix-ups. MOHAMMAD YUNOOS

PACKAGING OPERATIONS: 

PACKAGING OPERATIONS Checks should be made to ensure that any electronic code readers, label counters or similar devices are operating correctly. Printed and embossed information on packaging materials should be distinct and resistant to fading or erasing. On-line control of the product during packaging should include at least checking the following: a) General appearance of the packages; b) Whether the packages are complete; c) Whether the correct products and packaging materials are used, d) Whether any over-printing is correct; e) Correct functioning of line monitors. MOHAMMAD YUNOOS

PACKAGING OPERATIONS: 

PACKAGING OPERATIONS Products which have been involved in an unusual event should be reintroduced into the process only after special inspection, investigation and approval by authorized personnel. Detailed record should be kept of this operation. Any significant or unusual discrepancy observed during reconciliation of the amount of bulk product and printed packaging materials and the number of units produced should be investigated and satisfactorily accounted for before release . MOHAMMAD YUNOOS

PACKAGING OPERATIONS: 

PACKAGING OPERATIONS Upon completion of a packaging operation, any unused batch-coded packaging materials should be destroyed and the destruction recorded. A documented procedure should be followed if uncoded printed materials are returned to stock. MOHAMMAD YUNOOS

BATCH PACKAGING RECORDS: 

BATCH PACKAGING RECORDS Batch Packaging Record should be kept for each batch or part batch processed. The record should carry the batch number and the quantity of bulk product to be packed. It includes: a)The name of the product b) The date(s) and times of the packaging operations c) The name of the responsible person carrying out the packaging operation e)The initials of the operators of the different significant steps. f) Records of checks for identity and conformity with the packaging instructions including the results of in-process controls MOHAMMAD YUNOOS

BATCH PACKAGING RECORDS: 

BATCH PACKAGING RECORDS g)Details of the packaging operations carried out, including references to equipment and the packaging lines used. h) Whenever possible, samples of printed packaging materials used, including specimens of the batch coding, expiry dating and any additional overprinting i) Notes on any special problems or unusual events including details, with signed authorization for any deviation from the Packaging Instructions MOHAMMAD YUNOOS

BATCH PACKAGING RECORDS: 

BATCH PACKAGING RECORDS j) The quantities and reference number or identification of all printed packaging materials and bulk product issued, used, destroyed or returned to stock and the quantities of obtained product, in order to provide for an adequate reconciliation. A complete list of all the packaging materials required for a standard batch size, including quantities, sizes and types, with the code or reference number relating to the specifications of each packaging material MOHAMMAD YUNOOS