Cisco 300-135 VCE

Views:
 
Category: Education
     
 

Presentation Description

One of the best ways to prepare Cisco 300-135 exam is with CCNP 300-135 dumps questions answers with Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) practice test software. VceTests provides one of the best CCNP exam dumps for Cisco students. Prepare Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) exam from our 300-135 practice test and be certified. https://www.vcetests.com/300-135-vce.html

Comments

Presentation Transcript

slide 1:

TROUBLESHOOTING AND MAINTAINING CISCO IP NETWORKS TSHOOT Cisco 300-135

slide 2:

VceTests provides valid Cisco 300-135 exam dumps that are verified by expert IT professionals. We have Implementing Troubleshooting and Maintaining Cisco IP Networks TSHOOT 300-135 VCE exam questions of CCNP with verified answers that can be of great help for students looking for Implementing Troubleshooting and Maintaining Cisco IP Networks TSHOOT questions answers.

slide 3:

Free Demo PDF + Practice Test Desktop Practice test Real Exam Questions Answers Features https://www.vcetests.com/300-135-vce.html

slide 4:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 1 A network administrator is troubleshooting an EIGRP connection between RouterA IP address 10.1.2.1 and RouterB IP address 10.1.2.2. Given the debug output on RouterA which two statements are true Choose two. A. RouterA received a hello packet with mismatched autonomous system numbers. B. RouterA received a hello packet with mismatched hello timers. C. RouterA received a hello packet with mismatched authentication parameters. D. RouterA received a hello packet with mismatched metric-calculation mechanisms. E. RouterA will form an adjacency with RouterB. F. RouterA will not form an adjacency with RouterB. Correct Answer: DF https://www.vcetests.com/300-135-vce.html

slide 5:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 2 When troubleshooting an EIGRP connectivity problem you notice that two connected EIGRP routers are not becoming EIGRP neighbors. A ping between the two routers was successful. What is the next thing that should be checked A. Verify that the EIGRP hello and hold timers match exactly. B. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP peer command. C. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP traffic command. D. Verify that EIGRP is enabled for the appropriate networks on the local and neighboring router. Correct Answer: D https://www.vcetests.com/300-135-vce.html

slide 6:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 3 How would you confirm on R1 that load balancing is actually occurring on the default-network 0.0.0.0 A. Use ping and the show ip route command to confirm the timers for each default network resets to 0. B. Load balancing does not occur over default networks the second route will only be used for failover. C. Use an extended ping along with repeated show ip route commands to confirm the gateway of last resort address toggles back and forth. D. Use the traceroute command to an address that is not explicitly in the routing table. Correct Answer: D https://www.vcetests.com/300-135-vce.html

slide 7:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 4 Which IPsec mode will encrypt a GRE tunnel to provide multiprotocol support and reduced overhead A. 3DES B. multipoint GRE C. tunnel D. transport Correct Answer: D https://www.vcetests.com/300-135-vce.html

slide 8:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 5 Which three features are benefits of using GRE tunnels in conjunction with IPsec for building site-to-site VPNs Choose three. A. allows dynamic routing over the tunnel B. supports multi-protocol non-IP traffic over the tunnel C. reduces IPsec headers overhead since tunnel mode is used D. simplifies the ACL used in the crypto map E. uses Virtual Tunnel Interface VTI to simplify the IPsec VPN configuration Correct Answer: ABD https://www.vcetests.com/300-135-vce.html

slide 9:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 6 Which statement is true about an IPsec/GRE tunnel A. The GRE tunnel source and destination addresses are specified within the IPsec transform set. B. An IPsec/GRE tunnel must use IPsec tunnel mode. C. GRE encapsulation occurs before the IPsec encryption process. D. Crypto map ACL is not needed to match which traffic will be protected. Correct Answer: C https://www.vcetests.com/300-135-vce.html

slide 10:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 7 The implementations group has been using the test bed to do a `proof-of-concept that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing routing scheme DHCP services NTP services layer 2 connectivity FHRP services and device security a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition A. R1 B. R2 C. R3 D. R4 E. DSW1 F. DSW2 G. ASW1 H. ASW2 Correct Answer: G https://www.vcetests.com/300-135-vce.html

slide 11:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 8 The implementations group has been using the test bed to do a `proof-of-concept that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing routing scheme DHCP services NTP services layer 2 connectivity FHRP services and device security a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition A. Under the BGP process enter the bgp redistribute-internal command. B. Under the BGP process bgp confederation identifier 65001command. C. Deleted the current BGP process and reenter all of the command using 65002 as the AS number. D. Under the BGP process delete the neighbor 209.56.200.226 remote-as 65002 command and enter the neighbor 209.65.200.226 remote-as 65002 command. Correct Answer: D https://www.vcetests.com/300-135-vce.html

slide 12:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 9 The implementations group has been using the test bed to do a `proof-of-concept that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing routing scheme DHCP services NTP services layer 2 connectivity FHRP services and device security a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition A. Under the interface Serial0/0/0 configuration enter the ip nat inside command. B. Under the interface Serial0/0/0 configuration enter the ip nat outside command. C. Under the ip access-list standard nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command. D. Under the ip access-list standard nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command. Correct Answer: C https://www.vcetests.com/300-135-vce.html

slide 13:

CISCO 300-135 QUESTIONS ANSWERS QUESTION 10 The implementations group has been using the test bed to do a `proof-of-concept that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing routing scheme DHCP services NTP services layer 2 connectivity FHRP services and device security a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition A. Under the interface Serial0/0/1 enter the ip access-group edge_security out command. B. Under the ip access-list extended edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command. C. Under the ip access-list extended edge_security configuration delete the deny ip 10.0.0.0.0 0.255.255.255 any command. D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access-group edge_security out command. Correct Answer: B https://www.vcetests.com/300-135-vce.html

slide 14:

WHY CHOOSE US 100 Passing Assurance Cisco Latest 300-135 Dumps 3 Months Free updates 300-135 Real Exam Questions Scenarios 100 Money Back Guarantee https://www.vcetests.com/300-135-vce.html

authorStream Live Help