SEMI SOLID DOSAGE FORMS

Views:
 
     
 

Presentation Description

No description available.

Comments

Presentation Transcript

FORMULATION DEVELOPMENT OF SEMISOLID DOSAGE FORMS:

FORMULATION DEVELOPMENT OF SEMISOLID DOSAGE FORMS PRESENTED BY B.SUNIL KUMAR REDDY M.PHARMACY

INDUSTRIAL PROCESSING:

INDUSTRIAL PROCESSING

PowerPoint Presentation:

Semisolid dosage forms are dermatological preparations intended to apply externally on the skin to produce local or systemic effect. Ex: Ointments, creams, pastes, gels etc Definition:

PowerPoint Presentation:

Pilot plant or small scale production equipment is essential in developing a manufacturing procedure for a production size batch. The preparation of many batches ranging in size from 2.5 to 25 or more kilograms, for product evaluation and clinical testing provides opportunity to observe, improve and correct the variations. Mixing and stirring operations are critical in the preparation these can be controlled in 0.5- 1.0kg batches of finished product.

PowerPoint Presentation:

The electrically operated propeller type mixer can be manually adjusted and positioned in the laboratory mixing vessel to achieve maximum turbulence. The angle of entry of the propeller shaft and the depth of the propeller can be easily varied in the laboratory to prevent aeration. A metal spatula can be held or positioned in the beaker during mixing to serve as a baffle to increase turbulence with out entrainment of air.

PowerPoint Presentation:

Aeration should be avoided, since it may lead to emulsion instability and variation in density with in a batch. Entrainment can occur Homogenizing Milling stage Filling equipment Packaging operation.

PowerPoint Presentation:

Aeration maybe prevented at the primary emulsion step if one phase is introduced into the other in such a manner that splashing and streaming are avoided. Splashing can overcome by careful adjustment of the mixing conditions and liquid flow pattern. Completely enclosed kettles are available for the manufacturing of semisolids which tend to aerate excessively.

PowerPoint Presentation:

Homogenization frequently increases the consistency of a semisolid emulsion because it increases the number of emulsified particles. consistency is affected by Number of passes through the homogenizer. Pressures used for homogenization. Rheological changes:

PowerPoint Presentation:

PREPARATION OF OIL AND AQUEOUS PHASES

PowerPoint Presentation:

The components of the oil mixtures are placed into a stainless steel steam jacketed kettle,melted and mixed. Some of the solid components e.g. stearic acid,cetyl alchol are available in many different forms like cakes,flakes or powder. The flakes are more preferable because of the convenience of handling. Petrolatum is inconvenient to handle unless it is melted and transferred by pumping or pouring from its drum.

PowerPoint Presentation:

The oil phase is then strained through several layers of cheese cloth to remove any foreign matter. If petrolatum is used as oil phase then it should be passed through filter medium particularly in ophthalmic preparations. The oil phase is transferred by gravity or pump to the emulsion mixing kettle.

PowerPoint Presentation:

The components of the aqueous phase are dissolved in the purified water and filtered. A soluble drug may be added to this aqueous phase.

PowerPoint Presentation:

The phases are usually mixed at a temperature of 70 to 72 0 C,because at this temperature intimate mixing of the liquid phases can occur. The properties of some emulsions depend on the temperature at which the phases are mixed.The initial mixing temperature must be raised above 70 to 72 0 C. MIXING OF PHASES

PowerPoint Presentation:

Three ways of mixing the phases: 1.Simultaneous blending of the phases. 2.Addition of the discontinuous phase to the continuous phase. 3.Additon of the continuous phase to the discontinuous phase.

PowerPoint Presentation:

The simultaneous blending of the phases requires the use of a proportioning pump and a continuous mixer. This method is used for continuous or large batch operation. The second method is used for emulsion systems that have a low volume of dispersed phase. The third process is preferred for many emulsion systems.

PowerPoint Presentation:

Equipments used for mixing of phases: 1. Agitator mixers :Sigma mixer and planetary mixer. 2. Shear mixers: Triple roller mill and Colloidal mill.

PowerPoint Presentation:

The mechanism of mixing is shearing.The sigma shaped blades creates high shear. Advantages: 1.It creates a minimum dead space during mixing. 2.It is used for wet granulation process. Disadvantages: 1.It works at a fixed speed. Sigma blade mixer:

PowerPoint Presentation:

It consists of two steel discs.Here one disc rotates and another one is stationary. When the material is passed through these discs they get sheared.Thus coarse particles are break down to small particles due to shear. Advantages: 1.It can be used in the production of sterile products. Disadvantages: 1.It is not used for dry milling. 2.Heat is generated during milling. Colloidal mill:

PowerPoint Presentation:

The rate of cooling is generally slow to allow for adequate mixing while the emulsion is still liquid. The temperature of the cooling medium in the equipment should be decreased gradually and at a rate consistent with the mixing of the emulsion and scrapping of the kettle walls to prevent formation of congealed masses of the ointment or cream . COOLING THE SEMISOLID EMULSION:

PowerPoint Presentation:

Perfume should be added at 43 to 45 0 c to avoid chilling the emulsion in case of oil in water type emulsion. Perfume should be added at room temperature in water in oil type emulsion. If the drug is not added in the aqueous phase then it should be added in solution form or in the form of crystals.

PowerPoint Presentation:

STORAGE OF SEMI-SOLIDS Unless rapid in process methods of analysis are developed, it is the usual practice to store the semisolid until the specified quality control tests have been completed before packaging into appropriate. containers: tubes, jars, or single dose packets. A product is considered to be in process until it has been packaged.

PowerPoint Presentation:

Evaporation of water from a cream must be retarded; this can be effectively accomplished by placing non-reactive plastic sheeting in direct contact with the cream, as well as covering the storage container with a tight-fitting stainless steel lid. The active substance in the cream or ointment may react with the storage container unless a Highly resistant, stainless steel, is used for bulk storage.

PowerPoint Presentation:

TRANSFER OF MATERIAL FOR PACKAGING The semi-solid may be gravity fed, if it is a two-Level operation or pumped to the filling equipment. It must be able to resist the shear stress developed in the transfer of the product, as well as that due to the mechanical action of the filling equipment. Once a formal manufacturing procedure has been established, there should be no deviation from it. The manufacturing and packaging equipment should be sanitized following thorough cleaning with detergents.

PowerPoint Presentation:

They should be flushed with chlorinated water, formalin, or other suitable sterilant followed by a bacteria-free water rinse. Water and swab samples should be taken to verify microbial elimination.

PowerPoint Presentation:

EVALUATION PARAMETERS Packaging & storage Minimum Fill Water content Metal particles Leakage test Sterility test Microbial screening In Vitro and In Vivo studies

authorStream Live Help