Piling Works Casing for All Types of Civil Work

Views:
 
Category: Entertainment
     
 

Presentation Description

Universal Piling Company has the experience to provide piling measure just from 0.20-2.60 meters of depth, all the way up to 60.0 meters. With the help of the technologically advanced hydraulic drills, it can provide the service in any soil condition. Call us +971 4 240 3666

Comments

Presentation Transcript

slide 1:

Piling works casing for all types of civil work Even though piling works is not a new technique for developing foundations of a building it is still widely used as of today’s standards. For large buildings that need to support a huge amount of load or pressure such technique is very much necessary. This technique has been used since the early 1980s. The piling contractors have used this method in building everything from offshore wind farms to domestic conservatories. Piling is generally defined as a deep foundation that is used to transfer all the building’s load to a foundation deeper than the building. This method is much more impactful than normal traditional shallow foundations. Piles are made up of timber or steel or even concrete. Following are some of the reasons why piling is strongly advised over traditional foundations  When the water table of the area or region is high and therefore piling is very much needed to support the building underneath.

slide 2:

 The soil on which the building is being built does not have the strength to support the whole weight of the building and thus piling method is used.  When a second building is being built in an area where there was already a previous building that has been demolished. The foundation of the previous building is very hard to remove and therefore piling is used to negate that issue.  The piling method is used especially when the current foundations of the building is not that effective to support the weight and is also unstable as well.  The ground of the building is very unsuitable to make a normal or traditional foundation and therefore piling method is used. Universal Piling Company has the experience to provide piling measure just from 0.20-2.60 meters of depth all the way up to 60.0 meters. With the help of the technologically advanced hydraulic drills it can provide the service in any soil condition. The following are some of the methods used by the company to do their piling services:  Bored Cast in Situ Piling This is a type of method where bored cast in situ piles are used. The dimensions of these piles range from 0.50-2.60 meters in their diameter and about 72 meters in depth.  Low Headroom Piling This method includes hydraulic rotary rigs which are very much capable to work in low headroom conditions like 4 meters of height and 1000 millimeters of pile diameter. The maximum headroom is 5 meters and diameter is 2 meters.  Mini or Micro Piling These methods include mini drills which has a diameter ranging from 140-300 millimeters. The depth is 30 meters. With efficient and new generation drills it can work on all soils and even in restricted headroom of 4 meters.

slide 3:

Therefore it can be easily that there are various types of piling services that are offered here. You can easily contact Universal Piling Company for any piling civil work requirements Call us +971 4 240 3666. Content Source

authorStream Live Help