Most Efficient Way to Drum Handling in Chemical Plants

Views:
 
Category: Entertainment
     
 

Presentation Description

Drum lifting is important because it gives them the freedom to move them to the location where it is required. The drum trucks have to move through complex spaces between machines, tools, and equipment. The dimension of the truck should be compact. It should have flexible wheels and the rotating capacity to place the drum at any point within the 180-degree radius

Comments

Presentation Transcript

slide 1:

Most Efficient Way to Drum Handling in Chemical Plants justpaste.it/7n8p4 Introduction Hydraulic power is calculated using the PXQ/600 formula. It is possible to lift and transport tons of loads using hydraulic systems with ease and speed. Industrial drums require high capacity drum handling systems every day. The plants need them to be used in moving drums to the boilers machines pumps and chemical processing units. Safety and prevention of accidents are the key parameters that need consideration while moving. The most frequently used equipment is a Drum lifter. Lifting Drums – Simple and Fast Drum lifting is important because it gives them the freedom to move them to the location where it is required. The drum trucks have to move through complex spaces between machines tools and equipment. The dimension of the truck should be compact. It should have flexible wheels and the rotating capacity to place the drum at any point within the 180-degree radius. Truck Handle – Flexible Spring and Gear The drum-truck should have a long handle and a flexible spring. The compression-expansion ratio should be able to apply an optimum value of pressure onto the base for lifting the larger and heavier drums with ease. Technical specifications of trucks and forklifts are very important for ensuring smooth operations. The dimension plays an important role in determining the drum diameter and the holding volume. For example you can consider a 55-gallon drum which weighs approximately 250 KGs when full. The truck should have the capacity to lift to the required height ex: 350mm approx and carry it to the required distance. 1 / 3

slide 2:

If the truck is manual it should have the minimum number of wheels for effortless carrying. Wheels reduce the burden on the person who is transporting the load. You can compare between trucks with two large wheels or four smaller wheels. There are also ergonomic drum-handlers that can carry bigger drums. Ergonomic handles provide extra hydraulic pressure for lifting and moving. The worker handling the task can perform the task easily with near to zero stress. He has to just direct the truck accurately through the plant to reach a destination within a few minutes. Loading and Unloading – Precision and Safety Matter Loading of drum onto the drum grab takes time. It has to hold the drum in the right position so that it doesnt slip and fall. The grabbing arms should be preferably in the shape of an arc. They should cover at least 60 to 70 of the drum diameter to have a firm grip. The pressure exerted by the hydraulic system should be sufficient to hold the drum in a vertical position without slanting. It is to ensure maximum safety while transporting. The wheels should be slip-free and strong. Since the maximum load is on the wheels they should have the maximum load- carrying capacity. The unloading spot can be anywhere within the plant or outside. The truck and forklift should have the capacity to move up to the unloading spot smoothly. The landing of the load should be smooth and risk-free. Conclusion 2 / 3

slide 3:

The technology of drum handling within your plant can ensure maximum safety and protection of the most hazardous chemicals and liquids and prevent accidents. 3 / 3

authorStream Live Help