Basic types of Teflon Coating

Views:
 
     
 

Presentation Description

Prabhat udyog provides best service in teflon coating,Teflon coating services,industrial coating services,teflon coating in hyderabad,heat resistant coating,corrosion prevention,non stick coating for Defence,Pharmaceuticals,Packing and food sectors.Teflon coating benefits from abrasion,weathering,corrosions.

Comments

Presentation Transcript

PowerPoint Presentation:

PRABHAT UDYOG

PowerPoint Presentation:

Teflon Coating Six Basic Types

PowerPoint Presentation:

1.PTFE (polytetrafluoroethylene) nonstick coating

PowerPoint Presentation:

PTFE (polytetrafluoroethylene) nonstick coatings are two-coat (primer/topcoat) systems. These products have the highest operating temperature of any Fluor polymer 260° C/500° F, and a extremely low coefficient of friction, good abrasion resistance, and good chemical resistance. PTFE is available only in water-based liquid form.

PowerPoint Presentation:

2.FEP (fluorinated ethylene propylene copolymer) nonstick coatings

PowerPoint Presentation:

FEP (fluorinated ethylene propylene copolymer) nonstick coatings melt and flow during baking to provide nonporous films. These coatings provide excellent chemical resistance. In addition to low friction, FEP coatings also have excellent nonstick properties. Maximum use temperature is 204° C/400° F. FEP is Available in water-based liquid and powder forms.

PowerPoint Presentation:

3.PFA (perfluoroalkoxy) nonstick coatings

PowerPoint Presentation:

PFA (perfluoroalkoxy) nonstick coatings melt and flow during baking to provide nonporous films. PFA offers the additional benefits of higher continuous use temperature 260° C/500° F, film thickness up to 40 mils, and greater toughness than PTFE or FEP. This combination of properties makes PFA an excellent choice for a wide variety of uses. PFA is available in both water-born liquid and powder forms.

PowerPoint Presentation:

4.ETFE (ethylene and tetrafluoroethylene) coatings

PowerPoint Presentation:

ETFE is a copolymer of ethylene and tetrafluoroethylene. Although not fully fluorinated, ETFE has excellent chemical resistance and can operate continuously at 149° C/300° F. This resin is the toughest of the fluoropolymers and can be applied at film builds up to 40 mils. ETFE is available in powder form only.

PowerPoint Presentation:

5.Teflon ®-S One Coat Coating

PowerPoint Presentation:

Teflon-S One coat are solvent-based liquid coating formulated with special blends of fluoro polymers and other high-performance resins to improve toughness and abrasion resistance. Because the film components stratify during baking, most of the fluoro polymer properties (such as low friction and nonstick character) are retained.

PowerPoint Presentation:

6.Teflon ®-S Dry Lubricant Coating

PowerPoint Presentation:

Dry lubricant coatings are special versions of Teflon®-S technology designed to provide lubrication under high-pressure. These product are solvent-base, one coat systems that are usually cured between 260° C/700° F.

PowerPoint Presentation:

Prabhat Udyog has more than 30 years of experience in Industrial grade Teflon Coating. Our experience extends to Food and Industrial grade Teflon coating for non-stickiness and anticorrosion. Coating is mainly intended to save the components against corrosion and easy relieving. Before Teflon Coating After Teflon Coating

PowerPoint Presentation:

Prabhat Udyog 2-3-695, Near Lal Bagh Masjid Zinda Tilismat Road Amberpet Hyderabad - 500013 AP, India +91- 40- 27406514

PowerPoint Presentation:

www.tefloncoating.in

authorStream Live Help