LP3 - LPAC Front - LPAAC Back - CBN3 - Front Flap & Velocity Systems

Views:
 
Category: Others/ Misc
     
 

Presentation Description

The LP3 setup is comprised of the LPAC front panel, LPAAC back panel, CBN3 Cummerbund and a removable Front Flap. All materials and workmanship are made in the USA. For more product details visit www.velsyst.com

Comments

Presentation Transcript

slide 1:

LP3 - LPAC FRONT - LPAAC BACK - CBN3 - FRONT FLAP ● LP3 setup comprised of LPAC front panel LPAAC back panel CBN3 Cummerbund and removable Front Flap ● Removable Front Flap and integrated flat kangaroo pouch sized to hold our Double HK417 Double 7.62 and Triple 5.56 Magazine Insert on front bottom ● Color matching Velcro ​ ® ​ Brand Loop Panel on chest ● Back panel includes two rows of loop MOLLE webbing and a drag handle at the top and four rows of MOLLE webbing at the bottom ● CBN3 - Three internal elastic mag pouches soft armor pocket and 6”x6” plate pocket with internal adjustment ● 100 made in the USA 340.00 Product Details:

slide 2:

The LP3 setup is comprised of the front panel of the Low-Profile Armor Carrier LPAC the back panel of the Low-Profile Assault Armor Carrier LPAAC the Standard Molle Plate Pocket Cummerbund CBN3 and a removable Front Flap. The LP3 is made of 500 Denier Cordura with a mesh interior and comes with our standard shoulder pads that are made of a stretch woven material allowing enough elasticity to permit room for cable/hydration tube routing. The LPAC and LPAAC are designed to provide the wearer with a high degree of mobility while providing an acceptable amount of soft armor coverage or both soft and hard armor coverage. The hard armor plates are contained in pockets attached to the outside of the ​soft armor ​ carrier allowing the soft armor to mold to the wearers body for long duration mission comfort. The front and rear hard armor plate pockets have adjustable internal plate suspension straps and a Velcro ​ ® ​ Brand flap closer to secure the plates. The LP3 is available in four sizes S M L and XL. The size small hard armor plate pockets hold small SAPI shape plates ONLY. The size medium large and x-large hard armor plate pockets hold 10"x12" Shooters/Swimmers cut plates or SAPI shape plates of corresponding sizes to the carrier. The soft armor inserts intended for this carrier are the Velocity Systems LPAC/LPAAC Cut Soft Armor. This is a custom cut of soft armor designed for this carrier. Other manufacturers soft armor may not fit correctly contact us to inquire about fitting if using other soft armor. All hook and loop material used is color matching Velcro ​ ® ​ Brand Fasteners. All materials and workmanship are 100 made in the USA. The ​Low-Profile Armor Carrier LPAC front panel ​ has a removable front flap with three rows of MOLLE webbing and an integrated flat kangaroo pouch sized to hold our Double HK417 Double 7.62 and Triple 5.56 Magazine Insert. The chest has a color matching Velcro ​ ® ​ Brand Loop Panel and Velocity Systems SwiftClip ​ ® ​ Attachment System for rapid don/doff of auxiliary chest worn equipment i.e. Chest Rigs SwiftClip ​ ® ​ Placards. The ​Low-Profile Assault Armor Carrier LPAAC back panel ​ has two rows of loop MOLLE webbing and a drag handle at the top and four rows of MOLLE webbing at the bottom. This setup includes the ​Standard Molle Plate Pocket Cummerbund CBN3 ​ which provides three rows of MOLLE webbing on the outer side three internal elastic mag pouches a soft armor pocket with Velcro ​ ® ​ Brand closure and a 6"x6" plate pocket with internal VELCRO ​ ® Brand adjustment to position a ballistic plate forward or backward. The size small has 5 complete columns of MOLLE size medium has 6 complete columns of MOLLE size large has 7 complete columns of MOLLE. The follow is not included in this setup: Low-Profile Armor Carrier LPAC Back Panel / Low-Profile Assault Armor Carrier LPAAC Front Panel / Low-Profile Elastic Cummerbund

slide 3:

CBN1 The Low-Profile Elastic Cummerbund CBN1 can be purchased from our website as an additional accessory.

authorStream Live Help