Limiting Oxygen Index Apparatus & Smoke Density Apparatus

Views:
 
     
 

Presentation Description

1.Limiting Oxygen Index Apparatus :This test method describes a procedure for measuring the minimum concentration of oxygen in a flowing mixture of oxygen and nitrogen that will just support flaming combustion. Test applicable for wide range of materials such as Polymers, Cables, Textiles, Rubber etc. Supplied as per requirement, FTA or HFTA mode. For oxygen and nitrogen measurement in addition to Rotameter, direct oxygen percentage can be indicated digitally in the oxygen and nitrogen mixture, with the help of Oxygen Meter. 2. Smoke Density Apparatus :Density of smoke from the burning or Decomposition of plastics is measured. This test method describes the measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics. It is intended to be used for measuring the smoke producing characteristics of plastics under controlled conditions of combustion or decomposition. The measurements are made interns of the loss of light transmission through a collected volume of smoke produced under controlled, standardized conditions.

Comments

Presentation Transcript

SHAMBHAVI LAB INSTRUMENTS:

SHAMBHAVI LAB INSTRUMENTS Presentation on : 1.Limiting Oxygen Index Apparatus 2. Smoke Density Apparatus Contact us : http ://www.tensiletestingmachineutm.com

1.Limiting Oxygen Index Apparatus :

1.Limiting Oxygen Index Apparatus This test method describes a procedure for measuring the minimum concentration of oxygen in a flowing mixture of oxygen and nitrogen that will just support flaming combustion. Test applicable for wide range of materials such as Polymers, Cables, Textiles, Rubber etc. Supplied as per requirement, FTA or HFTA mode. For oxygen and nitrogen measurement in addition to Rotameter, direct oxygen percentage can be indicated digitally in the oxygen and nitrogen mixture, with the help of Oxygen Meter. For HFTA mode a Heater, Temp. Controller and Sensor is provided.

Slide3:

2. Smoke Density Apparatus Density of smoke from the burning or Decomposition of plastics is measured. This test method describes the measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics. It is intended to be used for measuring the smoke producing characteristics of plastics under controlled conditions of combustion or decomposition. The measurements are made interns of the loss of light transmission through a collected volume of smoke produced under controlled, standardized conditions. Digital Electronic Photometer with a 0 to 100 % Absorbance Scale & Electronic Timer Provided  

Images of Limiting Oxygen Index Apparatus & Smoke Density Apparatus:

Images of Limiting Oxygen Index Apparatus & Smoke Density Apparatus

Slide5:

THANK YOU ! Contact us : http ://www.tensiletestingmachineutm.com

authorStream Live Help