Zinc Rich Paints Manufacturers in Vadodara Gujarat India


Presentation Description

Looking for the top quality Zinc Rich Paints manufacturers and suppliers in Vadodara? Transpek Silox offers the best quality Zinc Rich paints and Zinc Oxide throughout Vadodara, Gujarat, India.


Presentation Transcript

slide 1:

Best Quality Zinc Rich Paint Manufacturers Vadodara Zinc Rich Paint Manufacturers in Vadodara Gujarat India. Zinc-rich paint is applied to a clean dry steel surface by either a brush or spray and usually contains an organic binder pre-mix. Zinc-rich paints must contain either between 65 to 69 or greater than 92 metallic zinc by weight in dry film. Zinc Rich Paints containing zinc dust are classified as organic or inorganic depending on the binder they contain. Inorganic binders are particularly suitable for paints applied in touch-up applications around and over undamaged hot- dip galvanized areas. Surface Preparation According to ASTM A780 the surface to be repaired shall be blast cleaned to SSPC-SP10/NACE No.2 near white metal for immersion applications and SSPC-SP11 near bare metal for less aggressive field conditions. When blasting or power tool cleaning is not practical hand tools may be used to clean areas to be reconditioned. The blast cleaning must extend into the surrounding undamaged galvanized coating.

slide 2:

Application This method of repairing galvanized surfaces must take place as soon as possible after preparation is completed and prior to the development of any visible oxides. The spraying or brushing should be in an application of multiple passes and must follow the paint manufacturer’s specific written instructions. In addition proper curing of the repaired area must occur before the product is put through the final inspection process. This repair can be done either in the galvanizing plant or on the job site and is the easiest repair method to apply because limited equipment is required. Zinc rich painting should be avoided if high humidity and/or low temperature conditions exist because adhesion may be adversely affected. Final Repaired Product The Zinc Rich coating thickness for the paint must be 50 higher than the surrounding coating thickness but not greater than 4.0 mils and measurements should be taken with either a magnetic electromagnetic or eddy current gauge. Finally the surface of the painted coating on the repaired area should be free of lumps coarse areas and loose particles. Paresh Saraiya / Managing Director 91 - 265 - 2680401 Transpek-Silox Office: 91 - 265 - 2680402 / Fax: +91 - 265 - 2680407 Kalali Road Atladra Vadodara Gujarat India http://www.transpek-silox.com/en/index.aspx

authorStream Live Help