How About Flange Mount Bearing For Vibration Isolation

Views:
 
Category: Others/ Misc
     
 

Presentation Description

Flange mounts are also sometimes referred to by other names like safetied tube mounts, 500 series mounts, all altitude mounts and low profile mounts.

Comments

Presentation Transcript

Slide 1:

How About Flange Mount Bearing For Vibration Isolation?

Slide 2:

When it comes to isolating vibration, controlling shock and reducing noise associated with equipment and machinery vibration, flange mounts perform extremely well in all three regards. Flange mounts are also sometimes referred to by other names like safetied tube mounts, 500 series mounts, all altitude mounts and low profile mounts. No matter which name they go by they offer the same reliable vibration isolation and control.

Slide 3:

The Vibro -Isolator series is particularly effective in applications where there are dynamic vibrational forces at play in multiple directions. That is because they can control the vibration from all directions. These flange  moalso offer superior protection against structural borne vibration.

Slide 4:

Their axial to radial stiffness ratio is close to 1 to 1. This means that they can bear both axial and radial loads. Indeed, Vibro -Isolators support axial loads ranging from 20 pounds (9 kg) all the way up to 2600 (1180 kg) pounds.

Slide 5:

Where are these types of mounts most commonly encountered? Some the many applications include marine engines, shipping containers, lift trucks, trucks, farm equipment, generators, shipping containers, transportation , unt bearing   construction, rail, portable equipment, compressors, military applications, off highway, machinery, pumps and centrifuges, trailers, radiators, engines, cabs, HVAC, fans and blowers.

Slide 6:

For those charged with installation, one of the best properties associated with flange mounts is that they are easy to mount. In fact, if a snubbing washer is used, the mounting process is virtually foolproof. Installation takes place through the mounted equipment’s support structure. A mounting hole through the support enables such installation.

Slide 7:

What other types of flange mounts are available? Typically the options come in two different varieties: flanged non-interlocked and flanged safety-interlocked.

Slide 8:

The former comes in handy for mounting situations where the machinery or engine producing the unwanted vibration will remain stationary . Mobile applications, on the other hand, require the peace of mind of knowing that they will not break free while operating. 

Slide 9:

Flanged safety-interlocked mounts provide this security, and they do so while effectively absorbing rebound loads. Machinery and engines that must be positively located for overturn or impact load possibilities are a good match for these types of flange mounts.

Slide 10:

Another attractive feature of these  flange mount bearing  is that they are competitively priced in comparison to other vibration control options. What’s more, users will enjoy a long service life with little to no maintenance required over the flange mount’s lifespan.

Slide 11:

As a side benefit, flange mounts reduce structure-borne noise at the same time they are controlling the vibration that causes such sound. As a result, they have the added advantage of helping to protect the hearing of those who routinely work in vibrational -heavy jobs.

Slide 12:

The Vibro -Isolator series of flange mounts accommodate both English and Metric bolts so that users around the globe can take advantage of all the perks they have to offer. This particular line of flange mount bearing is available in seven different sizes to accommodate a wide range of applications. They also come in several fabrications, including neoprene, natural rubber and nitrile (Buna-N). Finally, Vibro -Isolator flange mounts are proudly made in the USA.

Slide 13:

RICCOTEK Bearing Co.,LTD . TEL: +86 592 5759801 FAX: +86 592 5759802 E-mail: info@riccotek.com Skype: garyambu Website : www.riccotek.com

authorStream Live Help