5 Techniques to improve revit family creation

Views:
 
Category: Others/ Misc
     
 

Presentation Description

Revit Modeling India is an expert in Revit family creation services also known as BIM content creation services within Autodesk Revit which further helps in generating BIM Models. Product manufacturers, architects, contractors, engineers and fabricators are the prime users of Revit family creation services. Each BIM stakeholder gets these products modelled based on their custom requirements.

Comments

Presentation Transcript

slide 1:

REVIT MODELING INDIA 5 - Techniques to Improve Revit Family Creation 1. Stay Minimal WHILE YOU MODEL GEOMETRY It is suggested to have the detailed levels for elevations and plan representation and also have certain display options available on visibility settings. Bring to use the symbolic lines and also masking regions in place of geometry. Also try to stay minimal while you model geometry with the help of the defined visibility settings. 2. Do Not Over Model LIMIT THE CREATION OF ASSEMBLIES While creating assemblies make sure you have limited the creation of assemblies and parts in order to avoid the overloading of the model with all kinds of unneeded details. Make sure you only consider the important assemblies. 3. Limit Usage of Nested Families USE LESS DETAILED AND PARAMETERIZED FAMILIES With the correct usage of parameters and nested families there are huge chances of success while customising and building the families. But it is important that the usage of nested and parameterized families is only to the point it is necessary as any overloading can lead to complexity which may make the product limiting and frustrating. 4. Use Families in Place of Group GROUPS ARE MUCH POWERFUL THAN FAMILIES Infographics are visual representations of data making complex info easier to share and digest. When making your own simply organize your images charts and text. Finally cite your sources. 5. Avoid Over-Usage of Voids BUILD ELEMENTS USING SOLIDS INSTEAD OF VOIDS Voids can be considered to be of great use when they are utilised sparingly but they may impose penalties in terms of performance if they are used improperly or are overused. Many a time voids present the only way to model the elements accurately. However it is suggested if possible try building the elements using solids instead of voids. W W W .RE VI T M OD E LI N G I N D I A . C OM

authorStream Live Help