# Problem-Pizza_Cutter

Views:

Category: Education

## Presentation Description

No description available.

## Presentation Transcript

### PowerPoint Presentation:

OBJECTIVE: is to apply all of the skills you should’ve learned by this point . Problem # 17: Pizza Cutter (100 pts)

### Settings:

Settings New, English, Standard (in).IAM NOTE: You will now create to “Sub” Assembly files 1 st = 2-Arm, 1-Blade, & 1-Rivet 2 nd =1-Handle, 1-Cap, & 1-Guard

### Use the Assemble option to put it together:

Use the Assemble option to put it together

### Insert Blade & Arm; use the Assemble option to match up:

Insert Blade & Arm; use the Assemble option to match up

### Add 2nd Arm & Assemble them to match this::

Add 2 nd Arm & Assemble them to match this:

### Save As::

Save As: Now save this as Blade & Guard This will be the 1 st Assembly

### 2nd new Standard(in).iam & add 1-Handle 1-Cap:

2 nd new Standard(in). iam & add 1-Handle 1-Cap Use the Assemble option to make them & match this:

### Assemble using XZ plane of Guard::

Assemble using XZ plane of Guard:

### To the Handles XY Plane :

To the Handles XY Plane

### HINT::

HINT: Use the XZ planes of the Guard AND XY if Handle as your Assembly planes & offset the distance as 2.95 & it should all line up

### Now Save As:

Now Save As Save this as the 2 nd Assembly= Handle, Cap, & Guard Create yet a 3 rd & final Assembly Add the 2 “sub” assemblies you’ve created

### Now add the two “Sub” Assemblies:

Now add the two “Sub” Assemblies

### :

Select the Guard Right Click & turn Visibility OFF Repeat for Cap

### Use the Rotate option to free rotate to something like this::

Use the Rotate option to free rotate to something like this:

### Repeat using the “free” Rotate & Move:

Repeat using the “free” Rotate & Move

### Constrain it to these 2 lines:

Constrain it to these 2 lines

### Got the Right View & “free” move it so hidden lines match up:

Got the Right View & “free” move it so hidden lines match up

### Repeat for Top, Left, & Bottom :

Repeat for Top, Left, & Bottom

### Should look like this::

Should look like this:

### Change some things back::

Change some things back: Make the Cap & Guard Visible again View; Appearance; Shaded w/Edges

### Save this as::

Save this as: Pizza Cuter Assembly Now Open up your Guard Delete the circle & draw instead the following

### Draw to match & Extrude-CUT it Then Save it!:

Draw to match & Extrude-CUT it Then Save it!

### Open back up the Pizza Cuter Assembly & note the Guard has updated itself!:

Open back up the Pizza Cuter Assembly & note the Guard has updated itself!

### Create a New:

Create a New Standard(in).IPN Insert the Pizza Cuter Assembly Open up all the sub folders

### Right Click on the Blade & Guard; Select Auto Explode:

Right Click on the Blade & Guard; Select Auto Explode

### Set the distance to 3:

Set the distance to 3

### Should look like this::

Should look like this:

### Auto Explode or Tweak components to match this::

Auto Explode or Tweak components to match this:

### PowerPoint Presentation:

Make sure you Save As Your “U” Drive Inventor Folder Make a New Folder P-16 Block Assembly

### PowerPoint Presentation:

Make a new Standard Metric (mm) Assembly or IAM file, save it as P#16-Block.iam Place all the parts

### Use the Constrain options to mate or match up the parts:

Use the Constrain options to mate or match up the parts

### Should look something like this, I changed Materials to make it stand out more:

Should look something like this, I changed Materials to make it stand out more

### Save as:

Save as Save the assembly into the: P#16-Block Assembly Folder P#16-Block Assembled.iam

### Create a new; ANSI (mm).idw:

Create a new; ANSI (mm). idw

### Format the sheet size = D:

Format the sheet size = D

### iProperties: P#16-BLOCK ASSEMBLY EDP-TP-? FIRST LAST NAME MRS. BAXTER CONROE HS:

iProperties : P#16-BLOCK ASSEMBLY EDP-TP-? FIRST LAST NAME MRS. BAXTER CONROE HS

### Should look something like this::

Should look something like this:

### Save As: P#16-Block Assembly Titleblock:

Save As: P#16-Block Assembly Titleblock Print as PDF & Upload the PDF to Moodle for grading If you don’t do PDF from now on = auto -20 pts off the drawing assignment!

### New; Standard (mm).ipn:

New; Standard (mm). ipn

### Rotate so that you see something like this::

Rotate so that you see something like this:

Tweak bolts

### Tweak the Bushings:

Tweak the Bushings

Tweak the Base

### Now Animate the Explosion:

Now Animate the Explosion Upload the WMV or AVI file of your Exploded Animation Video to Moodle for grading