Mistakes You Should Avoid When Buying Used Injection Molding Machines

Views:
 
Category: Entertainment
     
 

Presentation Description

If you are thinking of getting into the business of creating machining parts but you do not have enough money to buy a new plastic injection molding machine, you can look for used injection molding machines that are in good condition.

Comments

Presentation Transcript

Mistakes You Should Avoid When Buying Used Injection Molding Machines :

Mistakes You Should Avoid When Buying Used Injection Molding Machines http://www.premierplasticsnj.com

Mistakes You Should Avoid When Buying Used Injection Molding Machines :

Mistakes You Should Avoid When Buying Used Injection Molding Machines http://www.premierplasticsnj.com If you are thinking of getting into the business of creating machining parts but you do not have enough money to buy a new plastic injection molding machine, you can look for used injection molding machines that are in good condition. As long as the machine is not faulty, it will create the plastic parts constantly and beneficially while helping you to keep prices low. You will be able to sell more parts and make a lot of money. You will also be able to establish a reputation as a manufacturer of high quality plastic parts.

Mistakes You Should Avoid When Buying Used Injection Molding Machines :

Mistakes You Should Avoid When Buying Used Injection Molding Machines http://www.premierplasticsnj.com When buying the used injection molding machines, there are quite a number of mistakes you should steer clear off. The first mistake is buying the machines poorly. To be able to buy a used machine that is dependable, you will need to make sure that it is properly examined before you part with your hard earned money to pay for it. The last thing you want is to undergo production loss as a result of multiple breakdowns from the machine that you will buy. You also do not want to spend a lot of money in doing repairs to the machine because that will not be good for your business.

Mistakes You Should Avoid When Buying Used Injection Molding Machines :

Mistakes You Should Avoid When Buying Used Injection Molding Machines http://www.premierplasticsnj.com Mistake number two that you should not make when buying used injection molding machines is choosing large screw diameters. While the large screw diameters can be ideal in some processes, in some cases, they can lead to poor quality problems as a result of material deprivation. When they are used with small shot sizes, they cause the plastic material to take a lot of time to get warmed up by the barrel heaters. Another problem with large screw sizes is that big clipping forces are produced during screw revolution, something that can cause the material to break down and lead to reject parts.

Mistakes You Should Avoid When Buying Used Injection Molding Machines :

Mistakes You Should Avoid When Buying Used Injection Molding Machines http://www.premierplasticsnj.com The third mistake you need to steer clear of when buying used injection molding machines choosing one that uses all-purpose screws. While the all-purpose screw can be used with most plastic materials, they are not so good with some materials. They tend to have lesser component types as well as efficiency rates for a few materials as compared to more superior injection casting screw designs. So if you decide to go for the all purpose screws, make sure that they can be used with the plastic materials that you will be dealing with.

Mistakes You Should Avoid When Buying Used Injection Molding Machines :

Mistakes You Should Avoid When Buying Used Injection Molding Machines http://www.premierplasticsnj.com The last but not least mistake that you should not make when buying used injection molding machines is choosing one that has controlled injection pressure. If you want to create plastic parts constantly, buying a machine that has restricted injection is going to slow you down. A good injection molding machine needs to have at least ten percent injection pressure in reserve to allow it to automatically tweak to normal variation depending on the thickness of the plastic material that you are molding. If you choose a machine that has less injection pressure, the moldings that will be created will be short.

Mistakes You Should Avoid When Buying Used Injection Molding Machines :

Mistakes You Should Avoid When Buying Used Injection Molding Machines http://www.premierplasticsnj.com For more tips on buying used injection molding machines, check out our website today at premierplasticsnj.com.

Mistakes You Should Avoid When Buying Used Injection Molding Machines :

Mistakes You Should Avoid When Buying Used Injection Molding Machines http://www.premierplasticsnj.com

authorStream Live Help