WildCat Chaser Bin Manufacturing Process

Views:
 
Category: Others/ Misc
     
 

Presentation Description

30 tonne WildCat Chaser Bin with 18 inch fast flow auger, hydraulic lobster back spout, steel plate construction, super heavy duty contractor model, smart-flow hydraulic choke, distinctive hydraulic cross auger, earth-moving tyres, locally designed, Australian made from West Australian sourced products. For more information, contact Parker Silos today on 08 9071 5440 or visit our website: www.parkersilos.com.au

Comments

Presentation Transcript

Slide 1: 

© Parker Silos & Sheetmetal 08 9071 5440 The life cycle of Parker Silos WildCat Chaser Bin

Slide 2: 

© Parker Silos & Sheetmetal 08 9071 5440 The WildCat Chaser Bin starts its life upside down, with the unique chassis design and floor being assembled first

Slide 3: 

© Parker Silos & Sheetmetal 08 9071 5440 End view of the “V” wing, showing the cut out for the inbuilt water tank

Slide 4: 

© Parker Silos & Sheetmetal 08 9071 5440 Welding the “V” wing, showing the end plate which incorporates the tie down anchor point

Slide 5: 

© Parker Silos & Sheetmetal 08 9071 5440 16mm Drawbar is fitted and bottom clean out doors ready to be finished

Slide 6: 

© Parker Silos & Sheetmetal 08 9071 5440 Walking Beam pivot points being set up, 40mm plate

Slide 7: 

© Parker Silos & Sheetmetal 08 9071 5440 Once all of the assembly and welding is completed on the underside, the Chaser Bin is flipped over ready for the assembly of the Grain Tub

Slide 8: 

© Parker Silos & Sheetmetal 08 9071 5440 6mm Front End sheet being lifted into position

Slide 9: 

© Parker Silos & Sheetmetal 08 9071 5440 Back sheet is already fitted, while the front is being tacked securely into position

Slide 10: 

© Parker Silos & Sheetmetal 08 9071 5440 Once the front and back are in position, one of the 6mm curved side sheets is lowered into position

Slide 11: 

© Parker Silos & Sheetmetal 08 9071 5440 The other side sheet is not fitted until all of the Internal Auger parts and Choke Cover are fitted, allowing easy access into the Chaser Bin

Slide 12: 

© Parker Silos & Sheetmetal 08 9071 5440 18’’ Long Reach Auger being assembled

Slide 13: 

© Parker Silos & Sheetmetal 08 9071 5440 Wild Cat Chaser Bin fitted with “painting” tyres ready for sandblasting and painting

Slide 14: 

© Parker Silos & Sheetmetal 08 9071 5440 18’’ Discharge Auger sections being primed. The top half is fitted with the internal part of the hydraulic adjustable discharge spout

Slide 15: 

© Parker Silos & Sheetmetal 08 9071 5440 In the paint shed, during priming, before final assembly stage

Slide 16: 

© Parker Silos & Sheetmetal 08 9071 5440 WildCat graphics applied and all of the necessary items bolted on after 2 coats of 2-pack gloss paint

Slide 17: 

© Parker Silos & Sheetmetal 08 9071 5440 Final check of Long Reach Auger fold function before delivery of the original WildCat Chaser Bin

Slide 18: 

© Parker Silos & Sheetmetal 08 9071 5440

Slide 19: 

© Parker Silos & Sheetmetal 08 9071 5440 Contact the team at Parker Silos & Sheetmetal today to secure your new WildCat Chaser Bin P: 08 9071 5440 F: 08 9071 5850 E: admin@parkersilos.com.au W: www.parkersilos.com.au