De Shuttering Oil

Views:
 
     
 

Presentation Description

Visit http://neopaints.co.in for Paint Manufacturers, Alkyd Resin Manufacturers, Epoxy Paint Manufacturers, Heat Resistant Paint Manufacturers, Phenolic Resin Manufacturers, Pu Paint Manufacturers, Resin Manufacturers, Industrial Paint Manufacturers, epoxy & Acrylics Coating Manufacturer, building materials manufacturers.

Comments

Presentation Transcript

slide 1:

De Shuttering Oil Mold release De Shuttering OilDSO is water based mould releasing agent which gives clean quick and very quick stripping of formwork also it ensures stain free high quality concrete. DSO is basically supplied as white liquid which is in spray able form and ready to use as direct application on required places. The reactive component of DSO gives a damp proof interface that protects mould and ensures even texture and color for the cast concrete. For preventing the adhesion of cement to mold it allows air to scarper from interface during the process of concrete placing and its vibration. It will minimize the blemishes of surface and results a reduction in the remedial costs. Advantage  Costs low and economical to use  Water dilute-able  It is non toxic and non hazardous  DSO is feasible for all types of concrete formworks  Results non staining  Minimizes the cleaning efforts before re using of shutters  Helps in reducing the imperfections of concrete surfaces  It Extends the life wood and steel shuttering It can be easily applied by brush or mould oil sprayer. In case of using mould oil sprayer it should be necessary to check that fine nozzle is fit in it because mould release DSO should applied in light film if it is over applied the excess material should drain and then remove it with sponge from bottom of mould. Pools of mould release DSO cannot be allow getting dry if so it causes surface retardation of concrete. Coverage Steel 125-180 m2/ 6 liter Coated Form Ply 290-150 m2/ 6 liter For untreated wooden surface 75 � 100 m2/ 6 liter Properties Colour Amber color liquid

slide 2:

Specific Gravity 0.85+/- 0.5 g/cc Dilution 1 Liter of mould release DSO to be mixed with 5 liter of water NEO DE SHUTTERING OIL: Products are ready to use mould release agent for rapid stripping of moulds in any formwork. They are clean and stain free. Grades available in the range are DSO – STD DSO- RTU. DSO STD is a concentrated emulsified chemical mould release agent that can be diluted with water. This reduces storage and transportation cost. Coverage -150 to 160 sq.m/kg. DSO RTU is an oil based chemical mould release agent for quick stain free and easy stripping activity. Can be used for steam curing also. Works faily well on wet surfaces also. Coverage of the product is 50- 60 sq.m/litre. Neo Pack Plast India Pvt. Ltd. an ISO 9001:2015 Certified Company was established in 1978 for manufacture of MS Barrels. Its founder Mr Aziz Khan started this venture made steady progress thus steered ahead the companyto a leading multi-product company. Today Neo as a company has diversified into Synthetic Resins / Paints/ LDPE PP Liner Bags / Construction Chemicals / Insulating Varnishes. Neo also has proved to be a good manufacturing organization with expertise in Product Development / Sourcing Inventory management / Quality Consistency. Neo hence is most sought outsourcing vendor for big corporates. Visit http://neopaints.co.in for Paint Manufacturers Alkyd Resin Manufacturers Epoxy Paint Manufacturers Heat Resistant Paint Manufacturers Phenolic Resin Manufacturers Pu Paint Manufacturers Resin Manufacturers Industrial Paint Manufacturers epoxy Acrylics Coating Manufacturer building materials manufacturers.

authorStream Live Help