Things Need to Consider While Changing the Brake Fluid of Audi

Views:
 
Category: Others/ Misc
     
 

Presentation Description

The brake fluid of Audi helps to keep the brake line mobile. So, you need to replace the right type of fluid in your car. There are several things to keep in mind such as high boiling points, high quality fluid, and moisture absorption. The brake fluid can even corrode the adjoining components. See these slides to know the things you need to consider while changing the brake fluid of Audi.

Comments

Presentation Transcript

Slide1:

Things Need to Consider While Changing the Brake Fluid of Audi

Slide2:

Brake fluids are a hydraulic fluid which is used for functioning most of the brake applications for the smooth running of the Audi on the road.

Slide3:

The brake fluids are putting high pressure from a point in which it is created through the hydraulic lines to its braking mechanism.

Slide4:

When force is applied to any points of the braking system, the brake fluid is transferred to its other part.

Slide5:

When you are replacing the brake fluids, make sure that you are aware of the brake fluids and use the right type of fluid in the Audi.

Slide6:

The following points help you to choose the brake fluid for your Audi while changing the brake fluids.

Slide7:

High boiling points

Slide8:

The brake fluids are generally subjected to run in extremely high temperature and primarily used in the wheel cylinders.

Slide9:

While changing the brake fluids of the Audi ensure that it has a high boiling point, otherwise the hydraulic brake fluid unable to transfer the braking force.

Slide10:

High-quality fluid

Slide11:

Make sure that you are choosing the brake fluid which is high in quality and meets the requirements defined by the various organizational standards.

Slide12:

Ensure that your chosen brake fluids are compatible with the Audi and enhance its performance and fuel economy.

Slide13:

Absorb the moisture

Slide14:

The brake fluid has a boiling point, but when it absorbs the moisture, it can lower down the boiling point and damage the efficiency of the fluid.

Slide15:

If you are topping off the fluid reservoirs for a prolonged period of time, then the brake fluids can be contaminated. So, consider these things while selecting one of them.

Slide16:

Corrosive fluid

Slide17:

The brake fluids are corrosive substances. So, when you topping off the cars reservoirs, it may spill the brake fluids onto your engine or the surrounding area.

Slide18:

So, wipe it off immediately. If the fluids are spilled onto your skin, then wash it immediately and seek medical attention as soon as possible.

Slide19:

Contaminated fluid

Slide20:

Be careful that the brake fluids of the Audi are not contaminated with any grease, oil and other impurities because these impurities get into the braking system and cause defects.

Slide21:

To get a clean fluid and safe braking system, you need to protect the fluids against the contaminants by adding corrosion inhibitors.

Slide22:

Final words

Slide23:

Many car owners don't aware of the truth that the brake fluids of the Audi contain explosive matters.

Slide24:

So, when you choose the right brake fluids for your car, don't mix the hydraulic fluid with any other fluid substances.

Slide25:

http://www.munichwest.com/ https://plus.google.com/+MunichWestDecatur https://www.facebook.com/Munich-West-195963260464904/ https://twitter.com/aut0_repair THANK YOU!

authorStream Live Help