How to Install Foam Molding

Views:
 
Category: Entertainment
     
 

Presentation Description

First, measure the foam molding as you would for traditional wood molding. For crown or base, measure the wall from one corner to another. For panel and other moldings determine the outside measurements of the space where you want to install the foam molding. You can make use of an angle finder in order to get precise corners. Follow the instructions with the angle finder, read the angle and divide by two to obtain the angle of each piece for the corners.

Comments

Presentation Transcript

Foam molding:

Foam molding By Justin Baker

Justin Baker's Bio::

Justin Baker's Bio: Hi, I'm Justin Baker your host here at Moulding Installation. What can I tell you about mouldings that you don't already know? Well, a lot, I hope!! I've been in the construction business for years, mostly as a general, but now have downsized to just doing specialty projects.

PowerPoint Presentation:

First, measure the foam molding as you would for traditional wood molding. For crown or base, measure the wall from one corner to another. For panel and other moldings determine the outside measurements of the space where you want to install the foam molding. You can make use of an angle finder in order to get precise corners. Follow the instructions with the angle finder, read the angle and divide by two to obtain the angle of each piece for the corners.

Please visit our website, Foam molding:

Please visit our website, Foam molding Next, with the help of a kitchen knife, cut the foam molding to the lengths required to fit the gaps between the corner pieces. Again, apply adhesive in a continuous ‘S’ pattern on the rear and top of the foam molding and press the foam molding firmly against the wall. Hold the piece of foam molding in place for a minimum of 30 seconds. Depending on the length of the foam molding, you may need two people to help you hold the foam molding piece in place while the glue bonds.

authorStream Live Help