rtos

Real-Time Operating Systems : 

Real-Time Operating Systems Prof. Stephen A. Edwards

What’s an Operating System? : 

What’s an Operating System? Provides environment for executing programs Process abstraction for multitasking/concurrency Scheduling Hardware abstraction layer (device drivers) Filesystems Communication We will focus on concurrent, real-time issues

Do I Need One? : 

Do I Need One? Not always Simplest approach: cyclic executive loop do part of task 1 do part of task 2 do part of task 3 end loop

Cyclic Executive : 

Cyclic Executive Advantages Simple implementation Low overhead Very predictable Disadvantages Can’t handle sporadic events Everything must operate in lockstep Code must be scheduled manually

Interrupts : 

Interrupts Some events can’t wait for next loop iteration Communication channels Transient events A solution: Cyclic executive plus interrupt routines Interrupt: environmental event that demands attention Example: “byte arrived” interrupt on serial channel Interrupt routine: piece of code executed in response to an interrupt

Handling an Interrupt : 

Handling an Interrupt 1. Normal program execution 2. Interrupt occurs 3. Processor state saved 4. Interrupt routine runs 5. Interrupt routine terminates 6. Processor state restored 7. Normal program execution resumes

Interrupt Service Routines : 

Interrupt Service Routines Most interrupt routines: Copy peripheral data into a buffer Indicate to other code that data has arrived Acknowledge the interrupt (tell hardware) Longer reaction to interrupt performed outside interrupt routine E.g., causes a process to start or resume running

Cyclic Executive Plus Interrupts : 

Cyclic Executive Plus Interrupts Works fine for many signal processing applications 56001 has direct hardware support for this style Insanely cheap, predictable interrupt handler: When interrupt occurs, execute a single user-specified instruction This typically copies peripheral data into a circular buffer No context switch, no environment save, no delay

Drawbacks of CE + Interrupts : 

Drawbacks of CE + Interrupts Main loop still running in lockstep Programmer responsible for scheduling Scheduling static Sporadic events handled slowly

Cooperative Multitasking : 

Cooperative Multitasking A cheap alternative Non-preemptive Processes responsible for relinquishing control Examples: Original Windows, Macintosh A process had to periodically call get_next_event() to let other processes proceed Drawbacks: Programmer had to ensure this was called frequently An errant program would lock up the whole system Alternative: preemptive multitasking

Concurrency Provided by OS : 

Concurrency Provided by OS Basic philosophy: Scheduling and function usually orthogonal Changing the algorithm would require a change in scheduling First, a little history Let the operating system handle scheduling, and let the programmer handle function

Batch Operating Systems : 

Batch Operating Systems Original computers ran in batch mode: Submit job & its input Job runs to completion Collect output Submit next job Processor cycles very expensive at the time Jobs involved reading, writing data to/from tapes Cycles were being spent waiting for the tape!

Timesharing Operating Systems : 

Timesharing Operating Systems Solution Store multiple batch jobs in memory at once When one is waiting for the tape, run the other one Basic idea of timesharing systems Fairness primary goal of timesharing schedulers Let no one process consume all the resources Make sure every process gets “equal” running time

Real-Time Is Not Fair : 

Real-Time Is Not Fair Main goal of an RTOS scheduler: meeting deadlines If you have five homework assignments and only one is due in an hour, you work on that one Fairness does not help you meet deadlines

Priority-based Scheduling : 

Priority-based Scheduling Typical RTOS based on fixed-priority preemptive scheduler Assign each process a priority At any time, scheduler runs highest priority process ready to run Process runs to completion unless preempted

Typical RTOS Task Model : 

Typical RTOS Task Model Each task a triplet: (execution time, period, deadline) Usually, deadline = period Can be initiated any time during the period Execution time Period Deadline Time Initiation

Example: Fly-by-wire Avionics : 

Example: Fly-by-wire Avionics Hard real-time system with multirate behavior INU 1kHz GPS 20 Hz Air data 1 kHz Joystick 500 Hz Pitch control 500 Hz Lateral Control 250 Hz Throttle Control 250 Hz Aileron 1 1 kHz Aileron 2 1 kHz Elevator 1 kHz Rudder 1 kHz gyros, accel. GPS Sensor Stick Aileron Aileron Elevator Rudder Sensors Signal Conditioning Control laws Actuating Actuators

Priority-based Preemptive Scheduling : 

Priority-based Preemptive Scheduling Always run the highest-priority runnable process 1 2 3

Priority-Based Preempting Scheduling : 

Priority-Based Preempting Scheduling Multiple processes at the same priority level? A few solutions Simply prohibit: Each process has unique priority Time-slice processes at the same priority Extra context-switch overhead No starvation dangers at that level Processes at the same priority never preempt the other More efficient Still meets deadlines if possible

Rate-Monotonic Scheduling : 

Rate-Monotonic Scheduling Common way to assign priorities Result from Liu & Layland, 1973 (JACM) Simple to understand and implement: E.g., Processes with shorter period given higher priority Period Priority 10 1 (highest) 12 2 15 3 20 4 (lowest)

Key RMS Result : 

Key RMS Result Rate-monotonic scheduling is optimal: Task sets do not always have a schedule Simple example: P1 = (10, 20, 20) P2 = (5, 9, 9) Requires more than 100% processor utilization If there is fixed-priority schedule that meets all deadlines, then RMS will produce a feasible schedule

RMS Missing a Deadline : 

RMS Missing a Deadline p1 = (10,20,20) p2 = (15,30,30) utilization is 100% 1 2 P2 misses first deadline Would have met the deadline if p2 = (10,30,30), utilization reduced 83%

When Is There an RMS Schedule? : 

When Is There an RMS Schedule? Key metric is processor utilization: sum of compute time divided by period for each process: U =  ci / pi No schedule can possibly exist if U > 1 No processor can be running 110% of the time Fundamental result: RMS schedule always exists if U < n (2 1/n – 1) Proof based on case analysis (P1 finishes before P2)

When Is There an RMS Schedule? : 

When Is There an RMS Schedule? n Bound for U 1 100% Trivial: one process 2 83% Two process case 3 78% 4 76%  69% Asymptotic bound

When Is There an RMS Schedule? : 

When Is There an RMS Schedule? Asymptotic result: Converse is not true. Instead: If the required processor utilization is under 69%, RMS will give a valid schedule If the required processor utilization is over 69%, RMS might still give a valid schedule, but there is no guarantee

EDF Scheduling : 

EDF Scheduling RMS assumes fixed priorities Can you do better with dynamically-chosen priorities? Earliest deadline first: Processes with soonest deadline given highest priority

EDF Meeting a Deadline : 

EDF Meeting a Deadline p1 = (10,20,20) p2 = (15,30,30) utilization is 100% 1 2 P2 takes priority because its deadline is sooner

Key EDF Result : 

Key EDF Result Earliest deadline first scheduling is optimal: Earliest deadline first scheduling is efficient: If a dynamic priority schedule exists, EDF will produce a feasible schedule A dynamic priority schedule exists if and only if utilization is no greater than 100%

Static Scheduling More Prevalent : 

Static Scheduling More Prevalent RMA only guarantees feasibility at 69% utilization, EDF guarantees it at 100% EDF is complicated enough to have unacceptable overhead More complicated than RMA: harder to analyze Less predictable: can’t guarantee which process runs when

Priority Inversion : 

Priority Inversion RMS and EDF assume no process interaction Often a gross oversimplification Consider the following scenario: 1 2 Process 2 begins running Process 2 acquires lock on resource Process 1 preempts Process 2 Process 1 tries to acquire lock for resource

Priority Inversion : 

Priority Inversion Lower-priority process effectively blocks a higher-priority one Lower-priority process’s ownership of lock prevents higher-priority process from running Nasty: makes high-priority process runtime unpredictable

Nastier Example : 

Nastier Example Higher priority process blocked indefinitely 1 Process 3 begins running Process 3 acquires lock on resource Process 2 preempts Process 3 Process 1 tries to acquire lock and is blocked 3 2 Process 1 preempts Process 2 Process 2 delays process 3’s release of lock

Priority Inheritance : 

Priority Inheritance Solution to priority inversion Temporarily increase process’s priority when it acquires a lock Level to increase: highest priority of any process that might want to acquire same lock I.e., high enough to prevent it from being preempted Danger: Low-priority process acquires lock, gets high priority and hogs the processor So much for RMS

Priority Inheritance : 

Priority Inheritance Basic rule: low-priority processes should acquire high-priority locks only briefly An example of why concurrent systems are so hard to analyze RMS gives a strong result No equivalent result when locks and priority inheritance is used

Summary : 

Summary Cyclic executive Way to avoid an RTOS Adding interrupts helps somewhat Interrupt handlers Gather data, acknowledge interrupt as quickly as possible Cooperative multitasking But programs don’t like to cooperate

Summary : 

Summary Preemptive Priority-Based Multitasking Deadlines, not fairness, the goal of RTOSes Rate-monotonic analysis Shorter periods get higher priorities Guaranteed at 69% utilization, may work higher Earliest deadline first scheduling Dynamic priority scheme Optimal, guaranteed when utilization 100% or less

Summary : 

Summary Priority Inversion Low-priority process acquires lock, blocks higher-priority process Priority inheritance temporarily raises process priority Difficult to analyze