hmt training

Views:
 
     
 

Presentation Description

six week training at hmt pinjore

Comments

Presentation Transcript

PROJECT REPORT -2011 ON INDUSTRIAL TRAINING UNDERTAKEN AT HMT(PINJORE):

PROJECT REPORT - 2011 ON INDUSTRIAL TRAINING UNDERTAKEN AT HMT(PINJORE) SUBMITTED BY: SAHIL ANAND & RAMAN KUMAR 4709750 , 4709748

PATTERN SHOP :

PATTERN SHOP The most commonly used pattern material in the industry are 1.wood , 2.Aluminium, 3.Thermocol, 4.Rubber, 5.epoxy resin

Wood pattern Aluminium pattern :

Wood pattern A luminium pattern

THEMOCOLS: :

THEMOCOLS: Themocols can easily used to make pattern to make pattern as well to reduce the labourcost , etc. Themocols can only be used only once to make casting whereas for multiple pattern woods can be used although there might be certain defective after each time usage of woods which can easily be repaired and can be made ready for its next usage.

Melting of scrap in the furnace:

Melting of scrap in the furnace

Testing of molten metal:

Testing of molten metal

CORE MAKING :

CORE MAKING

PowerPoint Presentation:

After removing the core box, we will get the core for the further operation.

Cores :

Cores

Mould making:

Mould making Parts of mould Cope drag

PowerPoint Presentation:

Green sand addition in the mould

PowerPoint Presentation:

Multi – ram press put the presure on the sand, the sand settled down By this operation we make the cope & drag for the mould.

PowerPoint Presentation:

Then the core in fitted into the drag & the filters are attached to restrict the enterence of unwanted particals with the molten matel.

PowerPoint Presentation:

Pairing of drag & cope

PowerPoint Presentation:

Molten metal filling in the mould

Fettling: :

Fettling: Fettling is the process by which the pattern obtained is given the desired finish by various process. Beforefettling , the casting obtained is subjected to removal of projection ,chips runner ,riser etc. by the following processes 1.decoring 2.chipping 3.shot blasting 4.wheelabrasing

Decoring chipping shot nlasting or wheel abrasion :

Decoring chipping shot nlasting or wheel abrasion

Thank U:

Thank U

THANK U :

THANK U

authorStream Live Help