Types of Socket Weld Fittings

Views:
 
Category: Entertainment
     
 

Presentation Description

A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters generally for piping whose nominal diameter is NPS 2 or smaller.

Comments

Presentation Transcript

Types of Socket Weld Fittings :

Presented By Types of Socket Weld Fittings www.kkfittings.com

Slide2:

A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket Welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations . SW Fittings are family of high pressure fittings are used in various industrial processes About Socket weld Fittings www.kkfittings.com

Slide3:

Socket Weld 90 Degree Elbow  is a pipe fitting which is used in various industries to change the direction of a pipe. They are also known as street eight elbows. It is used to change the direction of the pipe by 90 degrees. 90 Degree Elbow www.kkfittings.com

Slide4:

These Socket Welds are required where not even the slightest of leakage is allowed and for steams ranging from 300 to 600 PSI. Socket Weld 45 Degree Elbow  is used where the pipe is small and usually has a diameter of NPS 2 or smaller. 45 Degree Elbow www.kkfittings.com

Slide5:

Socket Weld Tee used in various industries as well as places where pipe have a radius of NPS 2 or smaller. Socket Weld Tee is named since it looks like the letter T having two joints and the third one perpendicular to the other two. Tee www.kkfittings.com

Slide6:

A Socket Weld Cross has three outlets with one end acting as an inlet or vice versa. We ensure that all our products pass through a strenuous test which makes sure that our products work without any issues. Cross www.kkfittings.com

Slide7:

It is used in pipeline systems where not even a small leakage can be tolerated. These  Socket Weld Full Couplings Fittings  undergo various stress tests so they can operate even under extreme conditions. Full Coupling www.kkfittings.com

Slide8:

Socket Weld Half Coupling  is generally used for pipes with small diameters.  These are used in fluid conduits and used commonly for instrumentation hookups. Half Coupling www.kkfittings.com

Slide9:

The basic purpose of a  Socket Weld Reducer Insert  is to avoid the delay and the cost incurred when using and producing a Socket Weld Fitting which has considerably reduced outlets. They are used with straight sized fittings, which offer the same functionality as that provided by a threaded bushing which is also known as Socket Weld Threaded Reducer Insert used with threaded inserts. Reducer Insert www.kkfittings.com

Slide10:

Socket Weld Boss   is a type of fitting to a pipe which makes them leak-proof.  Socket Weld Boss is widely used in Petrochemicals, Oil & Gas, Gas processing, Condensers, Pharmaceutical, Pulp & Paper, and many other industries.  Contact us today  to request a free quote! Socket Weld Boss www.kkfittings.com

Slide11:

Socket Weld Branch Outlet  is made by cutting a hole on a pipe and then attaching it to the pipe by welding and at the same time running the bigger pipe through this outlet.  Socket Weld Branch Outlet www.kkfittings.com

Slide12:

A  Socket Weld 90 Degree Elbow Outlet  is used to ensure strength and help avoid leakages. These Elbow Outlet fittings are used for smaller pipes and usually used when one has to change the direction of the flow by 90 degrees. 90 Deg Elbow Outlet www.kkfittings.com

Slide13:

Forged Socket Weld 45 Degree Lateral Tee   fittings are available in a variety of materials and types such as Stainless Steel, Hastelloy, Nickel Alloy, Monel, Inconel, Duplex Steel, Super Duplex Steel etc. 45 Deg Lateral Tee www.kkfittings.com

Slide14:

A  Socket Weld Lateral Outlet  is made by cutting a hole into the main pipe and then welding a lateral outlet on it at an angle. We add a ring on a shaft on top of it which gives it additional strength thereby making it ready to use in a variety of industries such as in water treatment plants, oil, and chemical industries and gas industry Socket Weld Lateral Outlet www.kkfittings.com

Slide15:

Thank You! Follow us : Facebook | Twitter Contact us : +91  22 66394167 sales@kkfittings.com www.kkfittings.com

authorStream Live Help