300-135 Exam Cisco 300-135 Test Questions PDF - testmayor

Views:
 
Category: Education
     
 

Presentation Description

Thinking of best 300-135 Dumps for your Cisco 300-135 Exam??? Here it is at (testmayor.com). We present outstanding 300-135 Exam dumps with 100% valid and verified 300-135 Questions Answers. All 300-135 Dumps are obtainable in both PDF file and Exam Engine formats. Free Demos are available to experience the interface and proficiency of our 300-135 Practice Tests. Visit us for more information https://www.testmayor.com/300-135-test.html

Comments

Presentation Transcript

slide 1:

Cisco 300-135 Troubleshooting and Maintaining Cisco IP Networks TSHOOT

slide 2:

https://www.testmayor.com/300-135-test.html Thinking of best 300-135 Dumps for your Cisco 300-135 Exam Here it is at testmayor.com. We present outstanding 300-135 Exam dumps with 100 valid and verified 300-135 Questions Answers. All 300-135 Dumps are obtainable in both PDF file and Exam Engine formats. Free Demos are available to experience the interface and proficiency of our 300-135 Practice Tests.

slide 3:

https://www.testmayor.com/300-135-test.html Don’t take any stress for the preparation of 300-135 Exam because we will provide you real Exam questions answers Testmayor.com provide you some demo question answer of 300-135 VCE.

slide 4:

https://www.testmayor.com/300-135-test.html QUESTION 1 Exhibit: A network administrator is troubleshooting an EIGRP connection between RouterA IP address 10.1.2.1 and RouterB IP address 10.1.2.2. Given the debug output on RouterA which two statements are true Choose two. A. RouterA received a hello packet with mismatched autonomous system numbers. B. RouterA received a hello packet with mismatched hello timers. C. RouterA received a hello packet with mismatched authentication parameters. D. RouterA received a hello packet with mismatched metric-calculation mechanisms. E. RouterA will form an adjacency with RouterB. F. RouterA will not form an adjacency with RouterB. Answer: DF

slide 5:

https://www.testmayor.com/300-135-test.html QUESTION 2 Refer to exhibit. The tunnel between R2 and R5 is not coming up. R2 R4 and R5 do not have any routing information sources other than OSPF and no route filtering is implemented anywhere in the network. Which two actions fix the issue Choose Two A. Redistribute connected routes to OSPF on R5. B. Change the tunnel destination on R2 to 192.168.2.1 C. Advertise interface Lo0 to OSPF on R5. D. Configure a static route on R5 to 2.2.2.2 via 192.168.2.1 E. Fix the OSPF adjacency issue between R2 and r5. Answer: AC

slide 6:

https://www.testmayor.com/300-135-test.html QUESTION 3 A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems.

slide 7:

https://www.testmayor.com/300-135-test.html

slide 8:

https://www.testmayor.com/300-135-test.html

slide 9:

https://www.testmayor.com/300-135-test.html

slide 10:

https://www.testmayor.com/300-135-test.html

slide 11:

https://www.testmayor.com/300-135-test.html PC2 in VLAN 200 is unable to ping the gateway address 172.16.200.1 identify the issue. A. VTP domain name mismatch on SW4 B. VLAN 200 not configured on SW1 C. VLAN 200 not configured on SW2 D. VLAN 200 not configured on SW4 Answer: D

slide 12:

https://www.testmayor.com/300-135-test.html Question No : 4 Scenario: A customer network engineer has edited their OSPF network configuration and now your customer is experiencing network issues. They have contacted you to resolve the issues and return the network to full functionality.

slide 13:

https://www.testmayor.com/300-135-test.html

slide 14:

https://www.testmayor.com/300-135-test.html

slide 15:

https://www.testmayor.com/300-135-test.html

slide 16:

https://www.testmayor.com/300-135-test.html

slide 17:

https://www.testmayor.com/300-135-test.html

slide 18:

https://www.testmayor.com/300-135-test.html

slide 19:

https://www.testmayor.com/300-135-test.html Connectivity from R3 to R4 R5 and R6 has been lost. How should connectivity be reestablished A. Configure R4 with a virtual link to 192.168.13.2 B. Change the R3 and R4 hello-interval and retransmit-interface timers to zero so the link wont go down. C. Add an OSPF network statement for 4.4.4.4 0.0.0.0 area 1 in R3 D. Add an OSPF network statement for 192.168.34.3 0.0.0.255 area 2 in R3 E. Add an OSPF network statement for 192.168.34.0 0.0.0.255 area 1 in R3 Answer: E

slide 20:

https://www.testmayor.com/300-135-test.html Question No : 5 The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing routing scheme DHCP services NTP services layer 2 connectivity FHRP services and device security a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition A. Enable OSPF authentication on the s0/0/0 interface using the ip ospf authentication message-digest command B. Enable OSPF routing on the s0/0/0 interface using the network 10.1.1.0 0.0.0.255 area 12 command. C. Enable OSPF routing on the s0/0/0 interface using the network 209.65.200.0 0.0.0.255 area 12 command. D. Redistribute the BGP route into OSPF using the redistribute BGP 65001 subnet command. Answer: A

slide 21:

https://www.testmayor.com/300-135-test.html Question No : 6 The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing routing scheme DHCP services NTP services layer 2 connectivity FHRP services and device security a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition A. Under the interface Serial0/0/1 enter the ip access-group edge_security out command. B. Under the ip access-list extended edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command. C. Under the ip access-list extended edge_security configuration delete the deny ip 10.0.0.0.0 0.255.255.255 any command. D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access-group edge_security out command. Answer: B

slide 22:

https://www.testmayor.com/300-135-test.html Question No : 7 The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing routing scheme DHCP services NTP services layer 2 connectivity FHRP services and device security a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. The fault condition is related to which technology A. NTP B. IP DHCP Server C. IPv4 OSPF Routing D. IPv4 EIGRP Routing E. IPv4 Route Redistribution F. IPv6 RIP Routing G. IPv6 OSPF Routing H. IPv4 and IPv6 Interoperability I. IPv4 layer 3 security Answer: E

slide 23:

https://www.testmayor.com/300-135-test.html Question No : 8 What level of logging is enabled on a Router where the following logs are seen LINK-3- UPDOWN: Interface FastEthernet0/1 changed state to up LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1 changed state to up A. alerts B. critical C. Errors D. notifications Answer: D

slide 24:

https://www.testmayor.com/300-135-test.html Question No : 9 Which of the following are valid methods of providing a router with information concerning the location of the RP Choose all that apply. A. Statically defined RP B. Bootstrap Router C. Auto-RP D. RP Discovery Protocol RDP E. RP Helios F. RPARPRARP Answer: ABC

slide 25:

https://www.testmayor.com/300-135-test.html Question No : 10 Which of the following commands will remove all dynamic entries for a routers NAT table A. clear nat translations B. clear ip nat translations C. clear ip nat statistics D. clear ip nat transactions E. clear ip nat translations F. clear ip nat translations all Answer: B

slide 26:

https://www.testmayor.com/300-135-test.html Offering Effective PDF Tests Training to Individuals and Companies 100 Money Back Guarantee on All Dumps Special Student Discount Available Printable and Searchable PDF Braindumps User Interactive Exams Software

slide 27:

https://www.testmayor.com/300-135-test.html Good luck Testmayor provides you guaranteed success in 300-135 exam as we have latest 300-135 exam dumps. Click Here following link to download 300-135 VCE. Click Here following link to download 300-135 VCE.

authorStream Live Help