The rock cycle

The rock cycle : 

The rock cycle By kenny

Extrusive igneous rock : 

Extrusive igneous rock Extrusive igneous rocks, or volcanics, form when magma makes its way to Earth's surface. The molten rock erupts or flows above the surface as lava, and then cools forming rock. The lava comes from the upper mantle layer, between 50 km and 150 km below the Earth's surface. When lava erupts onto the Earth's surface, it cools quickly. If the lava cools in less than a day or two, there is no time for elements to form minerals. Instead, elements are frozen in place within volcanic glass. Often, lava cools over a few days to weeks and minerals have enough time to form but not time to grow into large crystals. Basalt is the most common type of extrusive igneous rock and the most common rock type at the Earth's surface

Metamorphic rock : 

Metamorphic rock Metamorphic rocks are rocks that have "morphed" into another kind of rock. These rocks were once igneous or sedimentary rocks. How do sedimentary and igneous rocks change? The rocks are under tons and tons of pressure, which fosters heat build up, and this causes them to change. If you exam metamorphic rock samples closely, you'll discover how flattened some of the grains in the rock are.

erosion : 

erosion Erosion is the process of weathering and transport of solids (sediment, soil, rock and other particles) in the natural environment or their source and deposits them elsewhere. It usually occurs due to transport by wind, water, or ice; by down-slope creep of soil and other material under the force of gravity; or by living organisms, such as burrowing animals, in the case of bioerosion.

lava : 

lava Lava is molten rock expelled by a volcano during an eruption. When first expelled from a volcanic vent, it is a liquid at temperatures from 700 °C to 1,200 °C (1,300 °F to 2,200 °F). Although lava is quite viscous, with about 100,000 times the viscosity of water, it can flow great distances before cooling and solidifying, because of its thixotropic and shear thinning properties. A lava flow is a (moving) outpouring of lava, which is created during a non-explosive effusive eruption. When it has stopped moving, lava solidifies to form igneous rock. The term lava flow is commonly shortened to lava. Explosive eruptions produce a mixture of volcanic ash and other fragments called tephra, rather than lava flows. The word 'lava' comes from Italian, and is probably derived from the Latin word labes which means a fall or slide. The first use in connection with extruded magma (molten rock below the earth's surface) was apparently in a short account written by Francesco Serao on the eruption of Vesuvius between May 14 and June 4, 1737. Serao described "a flow of fiery lava" as an analogy to the flow of water and mud down the flanks of the volcano following heavy rain

Weathering : 

Weathering Weathering is the breaking down of Earth's rocks, soils and minerals through direct contact with the planet's atmosphere. Weathering occurs in situ, or "with no movement", and thus should not be confused with erosion, which involves the movement of rocks and minerals by agents such as water, ice, wind, and gravity.

Sediment : 

Sediment Sediment is naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of fluids such as wind, water, or ice, and/or by the force of gravity acting on the particle itself. Sediments are most often transported by water (fluvial processes), wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments.

Intrusive igneous rock : 

Intrusive igneous rock Intrusive Igneous Rocks Many kilometers below the Earth’s surface, molten rock called magma flows into cracks or underground chambers. There, the magma sits, cooling very slowly over thousands to millions of years. As it cools, elements combine to form common silicate minerals, the building blocks of igneous rocks. These mineral crystals can grow quite large if space allows. Rocks that form in this way are called intrusive igneous or plutonic rocks. The mineral crystals within them are large enough to see without a microscope. There are many different types of intrusive igneous rocks but granite is the most common type.

Sedimentary rock : 

Sedimentary rock The earth's surface is constantly being eroded. This means that rocks are broken up into smaller pieces by weathering agents such as wind, water, and ice. These small pieces of rock turn into pebbles, gravel, sand, and clay. They tumble down rivers and streams. These pieces settle in a new place and begin to pile up and the sediments form flat layers. Over a long period of time, the pieces become pressed together and form solid rock called sedimentary rock. Most sedimentary rocks form under water. Most of the earth has been covered by water some time in the past. 70% of the earth is covered by water now. So sedimentary rocks are common all over the world. Sedimentary rocks are often rich in fossils. Sediments can harden into sedimentary rock in two ways. pressure-As layer after layer of sediments are deposited, the lower layers are pressed together tightly under the weight of the layers above. cementing-Some sediments are glued together by minerals dissolved in water.

deposition : 

deposition The change in state of matter from gas to solid that occurs with cooling. Usually used in meteorology when discussing the formation of ice from water vapor. This process releases latent heat energy to the environment. (2) Laying down of sediment transported by wind, water, or ice.

magma : 

magma Magma (from Greek μάγμα "paste") is a mixture of molten rock, volatiles and solids1 that is found beneath the surface of the Earth, and is expected to exist on other terrestrial planets. Besides molten rock, magma may also contain suspended crystals and dissolved gas and sometimes also gas bubbles. Magma often collects in magma chambers that may feed a volcano or turn into a pluton. Magma is capable of intrusion into adjacent rocks, extrusion onto the surface as lava, and explosive ejection as tephra to form pyroclastic rock. Magma is a complex high-temperature fluid substance. Temperatures of most magmas are in the range 700 °C to 1300 °C (or 1300 °F to 2400 °F), but very rare carbonatite melts may be as cool as 600 °C, and komatiite melts may have been as hot as 1600 °C. Most are silicate mixtures. Environments of magma formation and compositions are commonly correlated. Environments include subduction zones, continental rift zones,2 mid-ocean ridges and hot spots. Despite being found in such widespread locales, the bulk of the Earth's crust and mantle is not molten. Rather, most of the Earth takes the form of a rheid, a form of solid that can move or deform under pressure. Magma, as liquid, preferentially forms in high temperature, low pressure environments within several kilometers of the Earth's surface.

Rock cycle : 

Rock cycle A diagram of the rock cycle. Legend: 1 = magma; 2 = crystallization (freezing of rock); 3 = igneous rocks; 4 = erosion; 5 = sedimentation; 6 = sediments & sedimentary rocks; 7 = tectonic burial and metamorphism; 8 = metamorphic rocks; 9 = melting. The rock cycle is a fundamental concept in geology that describes the dynamic transitions through geologic time among the three main rock types: sedimentary, metamorphic, and igneous. As the diagram to the right illustrates, each type of rock is altered or destroyed when it is forced out of its equilibrium conditions. An igneous rock such as basalt may break down and dissolve when exposed to the atmosphere, or melt as it is subducted under a continent. Due to the driving forces of the rock cycle, plate tectonics and the water cycle, rocks do not remain in equilibrium and are forced to change as they encounter new environments. The rock cycle is an illustration that explains how the three rock types are related to each other, and how processes change from one type to another over time.

Heat/pressure : 

Heat/pressure Earth movements can push all types of rock deeper into the Earth. These rocks are then subjected to massive temperatures and pressures causing the crystalline structure and texture to change. THEY DO NOT MELT. The high pressure involved are often associated with mountain building processes.