screw jack

Views:
 
Category: Education
     
 

Presentation Description

No description available.

Comments

Presentation Transcript

Tutorial on Screw Jack:

Tutorial on Screw Jack Hareesha N G Dept of Aeronautical Engg Dayananda Sagar College of Engg Bangalore-78 3/26/2012 1 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Assembly Drawings 1. Screw Jack 3/26/2012 2 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-1: Create body of the Screw jack Select XZ Plane Draw the 2D sketch as shown Use revolved protrusion command to create 3D feature, Angle 360 0 3/26/2012 3 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-2: Create nut of the screw jack Select XZ Plane Draw the 2D sketch as shown Use revolved protrusion command to create 3D feature, Angle 360 0 3/26/2012 4 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-3: Create Screw Spindle of the screw jack (Step-1) Select XZ Plane Draw the 2D sketch as shown Use revolved protrusion command to create 3D feature, Angle 360 0 3/26/2012 5 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-3: Create Screw Spindle of the screw jack ( Step-2) Select XZ Plane Draw the 2D sketch as shown Use Cut out command to create Symmetric through hole 3/26/2012 6 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-3: Create Screw Spindle of the screw jack ( Step-3) Select XY Plane Draw the 2D sketch as shown Use Cut out command to create Symmetric through hole 3/26/2012 7 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-3: Create Screw Spindle of the screw jack ( Step-4) Select the Plane as shown Go to hole option, set the parameters as shown in dialogue box 3/26/2012 8 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-4: Create CUP of the screw jack (Step-1) Select XZ Plane Draw the 2D sketch as shown Use revolved protrusion command to create 3D feature, angle 360 0 3/26/2012 9 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-4: Create CUP of the screw jack (Step-2) Select XZ Plane Draw the 2D sketch as shown Use Cut out command to create the profile as shown Use Circular pattern to create remaining features as shown 3/26/2012 10 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-5: Create Special washer of the screw jack Select XZ Plane Draw the 2D sketch as shown Use revolved protrusion command to create 3D feature, angle 360 0 3/26/2012 11 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-6: Create Special washer of the screw jack (Step-1) Select XZ Plane Draw the 2D sketch as shown Use revolved protrusion command to create 3D feature, angle 360 0 3/26/2012 12 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-6: Create Special washer of the screw jack (Step-2) Select top surface as shown Draw the 2D sketch as shown Use cut out command to create 3D feature, depth 3mm 3/26/2012 13 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-6: Create Special washer of the screw jack (Step-3) Select cylindrical surface as shown Use thread command to create thread feature with the parameters as shown below 3/26/2012 14 Hareesha N Gowda, DSCE, Blore-78

PowerPoint Presentation:

Part-7: Create Tommy Bar of the screw jack Select XZ Plane Draw the 2D sketch as shown Use revolved protrusion command to create 3D feature, angle 360 0 3/26/2012 15 Hareesha N Gowda, DSCE, Blore-78

authorStream Live Help