Projection of lines

Projection of Strait Lines: 

Projection of Strait Lines Hareesha N G Dept of Aeronautical Engg Dayananda Sagar College of Engg Bangalore-78 3/27/2012 1 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

SIMPLE CASES OF THE LINE A VERTICAL LINE ( LINE PERPENDICULAR TO HP & // TO VP) LINE PARALLEL TO BOTH HP & VP. LINE INCLINED TO HP & PARALLEL TO VP. LINE INCLINED TO VP & PARALLEL TO HP. LINE INCLINED TO BOTH HP & VP. PROJECTIONS OF STRAIGHT LINES. Information regarding a line means It’s length, Position of it’s ends with hp & vp It’s inclinations with hp & vp will be given. Aim:- to draw it’s projections - means fv & tv. 3/27/2012 2 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

X Y V.P. X Y V.P. b’ a’ b a F.V. T.V. a b a’ b’ B A TV FV A B X Y H.P. V.P. a’ b’ a b Fv Tv X Y H.P. V.P. a b a’ b’ Fv Tv For Fv For Tv For Tv For Fv Note: Fv is a vertical line Showing True Length & Tv is a point. Note: Fv & Tv both are // to xy & both show T. L. 1. 2. A Line perpendicular to Hp & // to Vp A Line // to Hp & // to Vp Orthographic Pattern Orthographic Pattern (Pictorial Presentation) (Pictorial Presentation) 3/27/2012 3 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

A Line inclined to Hp and parallel to Vp (Pictorial presentation) X Y V.P. A B b’ a’ b a   F.V . T.V. A Line inclined to Vp and parallel to Hp (Pictorial presentation) Ø V.P. a b a’ b’ B A Ø F.V . T.V. X Y H.P. V.P. F.V. T.V. a b a’ b’  X Y H.P. V.P. Ø a b a’ b’ Tv Fv Tv inclined to xy Fv parallel to xy. 3. 4. Fv inclined to xy Tv parallel to xy. Orthographic Projections 3/27/2012 4 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

X Y V.P. For Fv a’ b’ a b B A   For Tv F.V . T.V. X Y V.P. a’ b’ a b   F.V . T.V. For Fv For Tv B A X Y   H.P. V.P. a b FV TV a’ b’ A Line inclined to both Hp and Vp (Pictorial presentation) 5. Note These Facts:- Both Fv & Tv are inclined to xy. (No view is parallel to xy) Both Fv & Tv are reduced lengths . (No view shows True Length) Orthographic Projections Fv is seen on Vp clearly. To see Tv clearly, HP is rotated 90 0 downwards, Hence it comes below xy. On removal of object i.e. Line AB Fv as a image on Vp. Tv as a image on Hp, 3/27/2012 5 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

X Y H.P. V.P. X Y  H.P. V.P. a b TV a’ b’ FV TV b 2 b 1 ’ TL X Y   H.P. V.P. a b FV TV a’ b’ Here TV (ab) is not // to XY line Hence it’s corresponding FV a’ b’ is not showing True Length & True Inclination with Hp . In this sketch, TV is rotated and made // to XY line. Hence it’s corresponding FV a’ b 1 ’ Is showing True Length & True Inclination with Hp. Note the procedure When Fv & Tv known, How to find True Length. (Views are rotated to determine True Length & it’s inclinations with Hp & Vp). Note the procedure When True Length is known, How to locate Fv & Tv. (Component a-1 of TL is drawn which is further rotated to determine Fv ) 1 a a’ b’ 1’ b  b 1 ’   TL b 1 Ø TL Fv Tv Orthographic Projections Means Fv & Tv of Line AB are shown below, with their apparent Inclinations  &  Here a -1 is component of TL ab 1 gives length of Fv. Hence it is brought Up to Locus of a’ and further rotated to get point b’. a’ b’ will be Fv. Similarly drawing component of other TL(a’ b 1 ‘) Tv can be drawn.  3/27/2012 6 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

The most important diagram showing graphical relations among all important parameters of this topic. Study and memorize it as a CIRCUIT DIAGRAM And use in solving various problems. True Length is never rotated. It’s horizontal component is drawn & it is further rotated to locate view. Views are always rotated, made horizontal & further extended to locate TL,  & Ø Also Remember Important TEN parameters to be remembered with Notations used here onward Ø    1) True Length ( TL) – a’ b 1 ’ & a b 2) Angle of TL with Hp - 3) Angle of TL with Vp – 4) Angle of FV with xy – 5) Angle of TV with xy – 6) LTV (length of FV) – Component (a-1) 7) LFV (length of TV) – Component (a’-1’) 8) Position of A- Distances of a & a’ from xy 9) Position of B- Distances of b & b’ from xy 10) Distance between End Projectors X Y H.P. V.P. 1 a b  b 1 Ø TL Tv LFV a’ b’ 1’ b 1 ’  TL Fv  LTV Distance between End Projectors.   & Construct with a’ Ø  & Construct with a b & b 1 on same locus. b’ & b 1 ’ on same locus. NOTE this 3/27/2012 7 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

a’ b’ a b X Y b’ 1 b 1 Ø  GROUP (A) GENERAL CASES OF THE LINE INCLINED TO BOTH HP & VP ( based on 10 parameters). PROBLEM 1) Line AB is 75 mm long and it is 30 0 & 40 0 Inclined to Hp & Vp respectively. End A is 12mm above Hp and 10 mm in front of Vp. Draw projections. Line is in 1 st quadrant. SOLUTION STEPS: 1) Draw xy line and one projector. 2) Locate a’ 12mm above xy line & a 10mm below xy line. 3) Take 30 0 angle from a’ & 40 0 from a and mark TL I.e. 75mm on both lines. Name those points b 1 ’ and b 1 respectively. 4) Join both points with a’ and a resp. 5) Draw horizontal lines (Locus) from both points. 6) Draw horizontal component of TL a b 1 from point b 1 and name it 1. ( the length a-1 gives length of Fv as we have seen already.) 7) Extend it up to locus of a’ and rotating a’ as center locate b’ as shown. Join a’ b’ as Fv. 8) From b’ drop a projector down ward & get point b. Join a & b I.e. Tv. 1 LFV TL TL FV TV 3/27/2012 8 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

X y a a’ b 1  45 0 TL 1 b’ 1 b’ LFV FV TL 55 0 b TV PROBLEM 2: Line AB 75mm long makes 45 0 inclination with Vp while it’s Fv makes 55 0 . End A is 10 mm above Hp and 15 mm in front of Vp.If line is in 1 st quadrant draw it’s projections and find it’s inclination with Hp. LOCUS OF b LOCUS OF b 1 ’ Solution Steps:- 1.Draw x-y line. 2.Draw one projector for a’ & a 3.Locate a’ 10mm above x-y & Tv a 15 mm below xy. 4.Draw a line 45 0 inclined to xy from point a and cut TL 75 mm on it and name that point b 1 Draw locus from point b 1 5.Take 55 0 angle from a’ for Fv above xy line. 6.Draw a vertical line from b 1 up to locus of a and name it 1 . It is horizontal component of TL & is LFV. 7.Continue it to locus of a’ and rotate upward up to the line of Fv and name it b’ .This a’ b’ line is Fv. 8. Drop a projector from b’ on locus from point b 1 and name intersecting point b . Line a b is Tv of line AB. 9.Draw locus from b’ and from a’ with TL distance cut point b 1 ‘ 10.Join a’ b 1 ’ as TL and measure it’s angle at a’. It will be true angle of line with HP. 3/27/2012 9 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

X a’ y a b’ FV 50 0 b 60 0 b 1 TL b’ 1 TL   PROBLEM 3: Fv of line AB is 50 0 inclined to xy and measures 55 mm long while it’s Tv is 60 0 inclined to xy line. If end A is 10 mm above Hp and 15 mm in front of Vp, draw it’s projections,find TL, inclinations of line with Hp & Vp. SOLUTION STEPS: 1.Draw xy line and one projector. 2.Locate a’ 10 mm above xy and a 15 mm below xy line. 3.Draw locus from these points. 4.Draw Fv 50 0 to xy from a’ and mark b’ Cutting 55mm on it. 5.Similarly draw Tv 60 0 to xy from a & drawing projector from b’ Locate point b and join a b. 6.Then rotating views as shown, locate True Lengths ab 1 & a’b 1 ’ and their angles with Hp and Vp. 3/27/2012 10 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

X Y a’ 1’ a b’ 1 LTV TL b 1 1 b’ b LFV TV FV  TL  PROBLEM 4 :- Line AB is 75 mm long .It’s Fv and Tv measure 50 mm & 60 mm long respectively. End A is 10 mm above Hp and 15 mm in front of Vp. Draw projections of line AB if end B is in first quadrant.Find angle with Hp and Vp. SOLUTION STEPS: 1.Draw xy line and one projector. 2.Locate a’ 10 mm above xy and a 15 mm below xy line. 3.Draw locus from these points. 4.Cut 60mm distance on locus of a’ & mark 1’ on it as it is LTV. 5.Similarly Similarly cut 50mm on locus of a and mark point 1 as it is LFV. 6.From 1’ draw a vertical line upward and from a’ taking TL ( 75mm ) in compass, mark b’ 1 point on it. Join a’ b’ 1 points. 7. Draw locus from b’ 1 8. With same steps below get b 1 point and draw also locus from it. 9. Now rotating one of the components I.e. a-1 locate b’ and join a’ with it to get Fv. 10. Locate tv similarly and measure Angles   & 3/27/2012 11 Hareesha N G, DSCE, Blore

PowerPoint Presentation: 

X Y c’ c LOCUS OF d & d 1 d d 1 d’ d’ 1 TV FV TL TL   LOCUS OF d’ & d’ 1 PROBLEM 5 :- T.V. of a 75 mm long Line CD, measures 50 mm. End C is in Hp and 50 mm in front of Vp. End D is 15 mm in front of Vp and it is above Hp. Draw projections of CD and find angles with Hp and Vp. SOLUTION STEPS: 1.Draw xy line and one projector. 2.Locate c’ on xy and c 50mm below xy line. 3.Draw locus from these points. 4.Draw locus of d 15 mm below xy 5.Cut 50mm & 75 mm distances on locus of d from c and mark points d & d 1 as these are Tv and line CD lengths resp.& join both with c. 6.From d 1 draw a vertical line upward up to xy I.e. up to locus of c’ and draw an arc as shown. 7 Then draw one projector from d to meet this arc in d’ point & join c’ d’ 8. Draw locus of d’ and cut 75 mm on it from c’ as TL 9.Measure Angles   & 3/27/2012 12 Hareesha N G, DSCE, Blore