Leak Detection Equipment

Views:
 
     
 

Presentation Description

http://www.h2onet.co.za/products/water-leak-detection-equipment If you worried about Water Leak problems, Then H2Onet solve your problem easily it’s provide the all water leak detection equipment.

Comments

Presentation Transcript

slide 1:

Primayer technology for network management and leakage control Wireless noise logger for leak detection Phocus3 is an advanced leak noise logger designed for detecting and localising water leakage. Wireless communications allows both ‘lift and shift’ or permanent distribution network operation. On site leakage results may be obtained via the Communications Module with detailed analysis carried out on the host software. Benefits • Rapid overnight identification of leaks • Two models available - local IR contact lift + shift operation - radio contact greater range for permanent installation • Small size • Histogram display of noise data • Phocus noise algorithm to reduce incidence of un-detected leaks • GPS coordinates stored in logger • Leak listening - real time whilst on site - recorded to aid remote leak identification Three sample epochs to separate consumer use from leakage Phocus3 is an intelligent acoustic logger which detects the noise generated by a water leak. The logger samples pipeline noise at one second intervals during each of three sample epochs during the night when background acoustic noise is lowest. It carries out statistical analysis on each of the three epochs to determine the Leakage Confidence Factor. The lowest leak noise amplitude is also measured termed the Critical Noise Value. This value is important as a measure of how close to the leak the logger is situated. Leakage status displayed on Google map courtesy of Google Maps.

slide 2:

Primayer Limited Primayer House Parklands Business Park Denmead Hampshire PO7 6XP United Kingdom T +44 02392 252228 F +44 02392 252235 E salesprimayer.com www.primayer.com Information in this document is subject to change without notice. Logger characteristics • Smallest size - local IR contact model is 40mm x 113mm including handle • Intelligence in logger to determine presence and level of leak noise • Epoch data memory approximately one year in most situations • Powered for 5 years dependent upon operational use • Submersible to IP68 Communications Module The Communications Module enables local programming/readback of the Phocus3 logger via infra-red communications. It gives on-site display of the Critical Noise Value and Leakage Confidence Factor for the most recent night. Data may be collected for the most recent 12 months and transferred to the host software for processing. The Communications Module also allows the user to listening via headphones to confirm the presence of leak noise. technology for network management and leakage control LIT -PH3-044-1.1 Data acquisition Data collected by the Communications Module is transferred to the PC software via USB. Data may be displayed as a table of all logger Critical Noise dB values and Leakage Confidence Factors for easy comparison of results. Histogram displays in 3D give further logger data analysis. Loggers are shown on a Google Map colour coded by Leak Confidence Factor and thus relative position to leaks. Clicking on an individual logger allows access a logger data report. Courtesy of Google Maps. Histogram display for each epoch. Daily data report for single logger. Data view show status of all deployed loggers. Communications Module provides local display of Leakage Confidence Factor LCF and Critical Noise Value CNV plus facility to listen to leak noise. Part Numbers Phocus3 noise logger local IR comms Phocus3 noise logger radio comms Communications Module Phocus3 kit - 36 loggers IR + Comms Modul2 Phocus3 kit - 36 loggers radio + Comms Module Phocus3 kit - 18 loggers IR + Comms Module BXG 102 BXG 101 BXG 901 BXG 020 BXG 010 BXG 030

authorStream Live Help