BRIGGS& STRATTON

Views:
 
Category: Entertainment
     
 

Presentation Description

No description available.

Comments

Presentation Transcript

BRIGGS& STRATTON 900 SERIES ENGINE DISASSEMBLY MANUAL:

BRIGGS& STRATTON 900 SERIES ENGINE DISASSEMBLY MANUAL By: Adrian & Zack

Slide2:

oil drain plug using the 10mm or socket Remove the dip stick air cleaner/filter cover using a flat top screw driver or 8 mm wrench or socket black air line from the back of the plate

Slide3:

2 bolts attaching back plate from the carburetor using a 8mm wrench or socket 4 screws and the bolt attaching the exhaust / muffler heat shield using a 7 mm wrench for exhaust and the 10 mm wrench or socket for the bolt 2 bolts attaching the mufflers using a 10mm wrench or socket / torque socket, and the gasket. 4 bolts from the recoil starter using a 8mm wrench or socket or a 5/16 socket. Reattach the 4bolts to the flywheel cover.

Slide4:

Off and on switch plate . Remove the 8mm bolts Fly wheel cover , 10mm bolts Fuel line Gas tank , 10mm wrench or socket

Slide5:

Carburetor and gasket Speed control lever Governor spring , lever Governor frame

Slide6:

Heat shield Ignition coil Flywheel cup Fly wheel

Slide7:

Valve cover & gasket Cylinder head & push rods Spark plug , cylinder head gasket Valve assembly , gasket , valve spring , valve keeper , valves

Slide8:

Crank cage and gasket Camshaft & lifters Piston rings , crank shaft gear, crank shaft Piston , piston head pin , piston rod

authorStream Live Help