Latest 400-351 Real Exam Questions with 400-351 Practice Test Dumps

Views:
 
Category: Education
     
 

Presentation Description

You can see many reasons to choose 400-351 Exam Dumps as study guide for the preparation of your IT exam. You will not find such short guide anywhere else. You can develop your understanding of the field just by reading concise questions and answers. Our experts have arranged all the information in very good pattern. Plethora of information has been given in 400-351 questions and answers. You will have knowledge about every aspect of the field till the end of this stuff. There is nothing what can frustrate you if you are having this PDF study guide.

Comments

Presentation Transcript

slide 1:

For More Information – Visit link below: htps://www.realexamdumps.com/ 400-351 Dumps PDF CCIE Wireless v3.1 https://www.realexamdumps.com/cisco/400-351-practice-test.html

slide 2:

Queston: 1 Which four optons are the HTTP methods supported by a reset API A. RETRIEVE B. GET C. PUT D. DELETE E. COPY F. POST G. SET Answer: B C D F Queston: 2 Refer to the exhibit. Which opton describes what this sequence of commands achievers on a Cisco Autonomus AP A. This example shows how to permit SNMP access to all objects with read-only permission to only those three specifc IP addresses using the community string public. The access point also sends confg traps to the hosts 192.180.1.111 and 192.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community string public is not sent with the traps because is the default community value. B. This example shows how to permit SNMP access to all objects with read-only permission to only those three specifc IP addresses using the community string public. The access point also sends confg traps to the hosts 192.180.1.111 and 192.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community string public is not sent with the traps. C. This example shows how to permit any SNMP manager to access all objects with read-only permission using the community string public. The access point also sends confg traps to the hosts 192.180.1.111 and 190.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community string public is not sent with the traps as this is the default community value. D. This example shows how to permit any SNMP manager to access to all objects with read-only permission using the community string public. The access point also sends confg traps to the hosts 192.180.1.111 and 190.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community string public is sent with the traps. Answer: D https://www.realexamdumps.com/cisco/400-351-practice-test.html

slide 3:

Explanaton: htp://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/7282- 12.html Confrmed: test in my demo switch public default is ro Queston: 3 You are getng the following error message. Which reason for this issue true DOT11-4-CANT_ASSOC Interface Dot 11 Radio0. Cannot associate NO Aironet Extension IE. A. “dot11 extension ” is missing under the interface Dot11Radio 0 interface. B. When repeater mode is used unicast-fooding must be enabled to allow Aironet IE communicatons. C. The parent AP MAC address has not been defned. D. Repeater mode only works between Cisco access point. Answer: A Explanaton: https://www.realexamdumps.com/cisco/400-351-practice-test.html

slide 4:

htp://www.cisco.com/c/en/us/td/docs/wireless/access_point/12- 2_11_JA/confguraton/guide/b12211sc/s11rep.html Queston: 4 You have received a new Cisco 5760 Controller and have gone through the inital startup wizard. You are now trying to add APs to the controller but these are not joining. Which three checks should you do next Choose three. A. Check that the radios are not in a shutdown state. B. Check the country code of the controller. The APs do not join the controller if the country code does not match. C. Check that the correct tme is set on the controller. D. Check that opton 53 has been set in the DHCP scope. E. Check that the controller has enough AP licenses. F. Check that the controller has been confgured with the correct hostname. Otherwise DNS resoluton fails. Answer: BCE Explanaton: https://www.realexamdumps.com/cisco/400-351-practice-test.html

slide 5:

Queston: 5 You are installing Converged Access controllers that run Cisco IOS-XE and you are ready to implement QoS. From the below choose all the possible QoS target levels that would apply to downstream trafc toward the client A. Client SSID Radio Port B. Client SSID Radio C. Client Radio D. Client SSID Answer: A Explanaton: htp://www.cisco.com/en/US/docs/switches/lan/catalyst3850/sofware/release/3.2_0_se/multbook/c onfguraton_guide/b_consolidated_confg_guide_3850_chapter_010010.html Queston: 6 DRAG DROP https://www.realexamdumps.com/cisco/400-351-practice-test.html

slide 6:

Drag and drop the CAPWAP event on the lef into the order in which they occur on the right during the WLC discovery and join processes. Answer: https://www.realexamdumps.com/cisco/400-351-practice-test.html

slide 7:

htp://www.cisco.com/c/en/us/td/docs/solutons/Enterprise/Mobility/vowlan/41dg/vowlan41dg -book/vowlan_ch8.pdf Queston: 8 Queston : 8 On a Cisco 5760 WLC which of the below is not part of the inital setup script A. Wireless management interface B. Host name C. HTTP server login account D. SNMP Network Management E. NTP server F. Enable password G. Default routng protocol Answer: G Explanaton: From: CT5760 Controller and Catalyst 3850 Switch Confguraton Example - Cisco htp://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/116342-confg-wlc- 00.html 5760 WLC Inital Confguraton This secton outlines the steps to succesfully confgure the 5760 WLC in order to host wireless services. Confgure Setup Script --- System Confguraton Dialog --- Enable secret warning ---------------------------------- In order to access the device manager an enable secret is required https://www.realexamdumps.com/cisco/400-351-practice-test.html

slide 8:

If you enter the inital confguraton dialog you will be prompted for the enable secret If you choose not to enter the intal confguraton dialog or if you exit setup without setng the enable secret please set an enable secret using the following CLI in confguraton mode- enable secret 0 cleartext password ---------------------------------- Would you like to enter the inital confguraton dialog yes/no: yes At any point you may enter a queston mark for help. Use ctrl-c to abort confguraton dialog at any prompt. Default setngs are in square brackets . Basic management setup confgures only enough connectvity for management of the system extended setup will ask you to confgure each interface on the system Would you like to enter basic management setup yes/no: yes Confguring global parameters: Enter host name Controller: w-5760-1 The enable secret is a password used to protect access to privileged EXEC and confguraton modes. This password afer entered becomes encrypted in the confguraton. Enter enable secret: cisco The enable password is used when you do not specify an enable secret password with some older sofware versions and some boot images. Enter enable password: cisco The virtual terminal password is used to protect access to the router over a network interface. Enter virtual terminal password: cisco Confgure a NTP server now yes: Enter ntp server address : 192.168.1.200 Enter a polling interval between 16 and 131072 secs which is power of 2:16 Do you want to confgure wireless network no: no Setup account for accessing HTTP server yes: yes Username admin: admin Password cisco: cisco Password is UNENCRYPTED. Confgure SNMP Network Management no: no Current interface summary Any interface listed with OK value "NO" does not have a valid confguraton Interface IP-Address OK Method Status Protocol Vlan1 unassigned NO unset up up GigabitEthernet0/0 unassigned YES unset up up Te1/0/1 unassigned YES unset up up Te1/0/2 unassigned YES unset down down Te1/0/3 unassigned YES unset down down Te1/0/4 unassigned YES unset down down Te1/0/5 unassigned YES unset down down Te1/0/6 unassigned YES unset down down Enter interface name used to connect to the management network from the above interface summary: vlan1 Confguring interface Vlan1: Confgure IP on this interface yes: yes IP address for this interface: 192.168.1.20 Subnet mask for this interface 255.255.255.0 : 255.255.255.0 https://www.realexamdumps.com/cisco/400-351-practice-test.html

slide 9:

Thank You for Trying Our Product For More Information – Visit link below: 20 Discount Coupon Code: REAL-OFF-20 https://www.realexamdumps.com/cisco/400-351-practice-test.html

authorStream Live Help