Ekeeda - Applied Electronics and Instrumentation Engineering

Views:
 
Category: Education
     
 

Presentation Description

Applied Electronics and Instrumentation Engineering is a perfect combination of electronics and instrumentation engineering, Applied Electronics is popularly known as an advanced version of engineering. Ekeeda offers Online Applied Electronics and Instrumentation Engineering Courses for all the Subjects as per the Syllabus.

Comments

Presentation Transcript

slide 1:

Ekeeda - Applied Electronics and Instrumentation Engineering APPLIED ELECTRONICS AND INSTRUMENTATION ENGINEERING

slide 2:

2 Ekeeda - Applied Electronics and Instrumentation Engineering UNIVERSITY OF KERALA B.Tech Degree Course – 2008 Scheme REGULATIONS 1. Conditions for Admission Candidates for admission to the B.Tech degree course shall be required to have passed the Higher Secondary Examination Kerala or 12 th Standard V.H.S.E. C.B.S.E. I.S.C. or any examination accepted by the university as equivalent thereto obtaining not less than 50 in Mathematics and 50 in Mathematics Physics and Chemistry/ Bio- technology/ Computer Science/ Biology put together or a diploma in Engineering awarded by the Board of Technical Education Kerala or an examination recognized as equivalent thereto after undergoing an institutional course of at least three years securing a minimum of 50 marks in the final diploma examination subject to the usual concessions allowed for backward classes and other communities as specified from time to time. 2. Duration of the course i The course for the B.Tech Degree shall extend over a period of four academic years comprising of eight semesters. The first and second semester shall be combined and each semester from third semester onwards shall cover the groups of subjects as given in the curriculum and scheme of examination ii Each semester shall ordinarily comprise of not less than 400 working periods each of 60 minutes duration iii A candidate who could not complete the programme and pass all examinations within Ten 10 years since his first admission to the B.Tech programme will not be allowed to continue and he has to quit the Programme. However he can be readmitted to the first year of the programme if he/she satisfies the eligibility norms applicable to the regular candidates prevailing at the time of readmission. 3. Eligibility for the Degree Candidates for admission to the degree of bachelor of technology shall be required to have undergone the prescribed course of study in an institution maintained by or affiliated to the University of Kerala for a period of not less than four academic years and to have passed all the examinations specified in the scheme of study 4. Subjects of Study The subjects of study shall be in accordance with the scheme and syllabi prescribed 5. Evaluation Candidates in each semester will be evaluated both by continuous assessment and end semester University examination. The individual maximum marks allotted for continuous assessment and University examination for each subject is as prescribed by the scheme of study. 5.1 Continuous Assessment C.A The marks awarded for the continuous assessment will be on the basis of the day-to-day work periodic tests minimum two in a semester and assignments minimum of three – one each from each module. The faculty member concerned will do the continuous assessment for each semester. The C.A. marks for the individual subjects shall be computed by giving weight age to the following parameters.

slide 3:

3 Ekeeda - Applied Electronics and Instrumentation Engineering Subject Attendance Tests Assignments/ Class Work Theory Subjects 20 50 30 Drawing 20 40 40 Practical 20 40 40 Project Work Work Assessed by Guide – 50 Assessed by a three member committee out of which one member is the guide – 50 The C.A. marks for the attendance 20 for each theory practical and drawing shall be awarded in full only if the candidate has secured 90 attendance or above in the subject. Proportionate reduction shall be made in the case of subjects in which he/she gets below 90 of the attendance for a subject. The CA marks obtained by the student for all subjects in a semester is to be published at least 5 days before the commencement of the University examinations. Anomalies if any may be scrutinized by the department committee and the final CA marks are forwarded to the university within the stipulated time. 5.2. End Semester University Examinations i There will be University examinations at the end of the first academic year and at the end of every semester from third semester onwards in subjects as prescribed under the respective scheme of examinations. Semester classes shall be completed at least 10 working days before the commencement of the University examination. ii The examination will be held twice in an year – April/May session for even semester and October/November session for odd semester. The combined 1 st and 2 nd semester is reckoned as equivalent to an even semester for the purpose of conduct of examination and the University examination will be held during April/May. However VII and VIII Semester examination will be conducted in both the sessions. This schedule will not be changed iii A student will be permitted to appear for the university examination only if he/she satisfies the following requirements a. He/she must secure not less than 75 attendance in the total number of working periods during the first year and in each semester thereafter and shall be physically present for a minimum of 60 of the total working periods. In addition he/she also shall be physically present in at least 50 of total working periods for each subject b. He must earn a progress certificate from the head of the institution of having satisfactorily completed the course of study in the semester as prescribed by these regulations c. It shall be open to the Vice-Chancellor to grant condonation of shortage of attendance on the recommendation of the head of the institution in accordance with the following norms d. The attendance shall not be less than 60 of the total working periods e. He/she shall be physically present for a minimum of 50 of the total working periods f. The shortage shall not be condoned more than twice during the entire course g. The condonation shall be granted subject to the rules and procedures prescribed by the university from time to time. h. The condonation for combined 1 st and 2 nd semesters will be reckoned as a single condonation for attendance purposes. iv A student who is not permitted to appear for the University examinations for a particular semester due to the shortage of attendance and not permitted by the authorities for condonation of shortage of attendance shall repeat the semester when it is offered again. This provision is allowed only once for a semester. v The university will conduct examinations for all subjects Theory Drawing Practical

slide 4:

4 Ekeeda - Applied Electronics and Instrumentation Engineering vi The scheme of valuation will be decided by the chief examiner for theory / drawing subjects vii For practical examinations the examiners together will decide the marks to be awarded. The student shall produce the certified record of the work done in the laboratory during the examination. The evaluation of the candidate should be as per the guidelines given in the syllabus for the practical subject. 6. Letter Grades For each subject in a semester based on the total marks obtained by the student in the University examination and Continuous assessment put together a letter grade SA+ A B+ B C+ C D E and F will be awarded. All letter grades except ‘F’ will be awarded if the marks for the University examination is 40 or above and the total mark C.A marks + University Exam mark is 50 or above. No absolute mark will be indicated in the grade card. Letter grade corresponding to total marks C.A marks+ University Exam mark and the corresponding grade point in a ten-point scale is described below. of Total marks C.A marks + University Exam mark Letter Grade Grade Point G.P Remarks 90 and above S 10 Excellent 85 and above but less than 90 A+ 9 80 and above but less than 85 A 8.5 75 and above but less than 80 B+ 8 70 and above but less than 75 B 7.5 65 and above but less than 70 C+ 7 60 and above but less than 65 C 6.5 55 and above but less than 60 D 6 50 and above but less than 55 E 5.5 Below 50 C.A + U.E or below 40 for U.E only F 0 Failed 7. Grade Point Average GPA and Cumulative Grade Point Average CGPA Grade point average is the semester wise average points obtained by each student in a 10-point scale. GPA for a particular semester is calculated as per the calculation shown below. GPA ∑ Credit  GP obtained for the subject ∑ credit for subject Cumulative Grade point Average CGPA is the average grade points obtained by the students till the end of any particular semester. CGPA is calculated in a 10-point scale as shown below. ∑ Credits for semester  GPA obtained for the semester CGPA ∑ credits for the semester GPA and CGPA shall be rounded to two decimal points. The Grade card issued to the students shall contain subject number and subject name credits for the subject letter grades obtained GPA for the semester and CGPA up to that particular semester. In addition to the grade cards for each semester all successful candidate shall also be issued a consolidated statement grades. On specific request from a candidate and after remitting the prescribed fees the University shall issue detailed mark to the individual candidate. 8. Minimum for a pass

slide 5:

5 Ekeeda - Applied Electronics and Instrumentation Engineering a A candidate shall be declared to have passed a semester examination in full in the first appearance if he/she secures not less than 5.5 GPA with a minimum of ‘E’ grade for the all individual subject in that semester. b A candidate shall be declared to have passed in an individual subject of a semester examination if he/she secures grade ‘E’ or above. c A candidate who does not secure a full pass in a semester examination as per clause a above will have to pass in all the subjects of the semester examination as per clause b above before he is declared to have passed in that semester examination in full. 9. Improvement of Grades i A candidate shall be allowed to re-appear for a maximum of two subjects of a semester examination in order to improve the marks and hence the grades already obtained subject to the following conditions a The candidate shall be permitted to improve the examination only along with next available chance. b The candidate shall not be allowed to appear for an improvement examination for the subjects of the VII VIII semesters c The grades obtained by the candidate for each subject in the improvement chance he has appeared for or the already existing grades – whichever is better will be reckoned as the grades secured. d First Second semester will be counted as a single chance and they can improve a maximum of three subjects ii A candidate shall be allowed to repeat the course work in one or more semesters in order to better the C.A. marks already obtained subject to the following conditions a He/she shall repeat the course work in a particular semester only once and that too at the earliest opportunity offered to him/her. b He/she shall not combine this course work with his/her regular course work c He/she shall not be allowed to repeat the course work of any semester if he has already passed that semester examination in full d The C.A marks obtained by the repetition of the course work will be considered for all purposes iii A candidate shall be allowed to withdraw from the whole examination of a semester in accordance with the rules for cancellation of examination of the University of Kerala. 10. Classification of Successful candidates i A candidate who qualifies for the degree passing all the subjects of the eight semesters within five academic years ten consecutive semesters after the commencement of his/her course of study and secures not less than 8 CGPA up to and including eighth semester overall CGPA shall be declared to have passed the B.Tech degree examination in FIRST CLASS WITH DISTINCTION ii A candidate who qualifies for the degree passing all the subjects of the eight semesters within five academic years ten consecutive semesters after the commencement of his/her course of study and secures less than 8 CGPA but not less than 6.5 CGPA up to and including eighth semester shall be declared to have passed the B.Tech degree examination in FIRST CLASS. iii All other successful candidates shall be declared to have passed the B.Tech Degree examination in SECOND CLASS iv Successful candidates who complete the examination in four academic years Eight consecutive semesters after the commencement of the course of study shall be ranked branch-wise on the basis of the CGPA in all eight semesters put together. In the case of a tie in the CGPA the total marks of

slide 6:

6 Ekeeda - Applied Electronics and Instrumentation Engineering the students who have got same CGPA shall be considered for finalizing the rank. Students who pass the examination in supplementary examination are also covered under this clause 11. Educational Tour a The students may undertake one educational tour preferably after fourth semester of the course and submit a tour report b The tour may be conducted during the vacation / holidays taking not more than 5 working days combined with the vacation / holidays if required. Total number of Tour days shall not exceed 15 days. c The tour period shall be considered as part of the working periods of a semester 12. Revision of Regulations The university may from time to time revise amend or change the regulations curriculum scheme of examinations and syllabi. These changes unless specified otherwise will have effect from the beginning of the academic year / semester following the notification of the University

slide 7:

7 Ekeeda - Applied Electronics and Instrumentation Engineering SCHEME FOR B.TECH DEGREE FROM 2008 APPLIED ELECTRONICS AND INSTRUMENTATION BRANCH: APPLIED ELECTRONICS AND INSTRUMENTATION SEMESTER I II Course No. Name of Subject Weekly load hrs Max. Sessional Marks Exam Exam Duration Max. Hrs Marks Credits L T D/P 08.101 Engineering Mathematics I 2 1 - 50 3 100 6 08.102 Engineering Physics 2 1 - 50 3 100 6 08.103 Engineering Chemistry 2 1 - 50 3 100 6 08.104 Engineering Graphics 1 - 2 50 3 100 6 08.105 Engineering Mechanics 2 1 - 50 3 100 6 08.106 Basic Civil Engineering 2 1 - 50 3 100 6 08.107 Basic Mechanical Engineering 2 1 - 50 3 100 6 08.108 Basic Electrical Electronics Engineering 2 1 - 50 3 100 6 08.109 Basic Communication Information Engineering 2 1 - 50 3 100 6 08.110 Engineering Workshops - - 2 50 3 100 4 TOTAL 17 8 4 500 1000 58 TOTAL MARKS 1500 TOTAL CREDITS 58 Note: 08.109 Subject shall be handled by the faculty of Electronics Communication Dept.in the Colleges.

slide 8:

8 Ekeeda - Applied Electronics and Instrumentation Engineering BRANCH: APPLIED ELECTRONICS AND INSTRUMENTATION SEMESTER III Course No. Name of Subject Weekly load hrs Max. Sessional Marks Exam Exam Duration Max. Hrs Marks Credits L T D/P 08.301 Engineering Mathematics IICMPUNERFHBTA 3 1 - 50 3 100 4 08.302 Solid State Devices TA 3 1 - 50 3 100 4 08.303 Network Analysis TA 3 1 - 50 3 100 4 08.304 Programming in C++ Data Structures TA 2 - 2 50 3 100 4 08.305 Functional Electronics A 3 1 - 50 3 100 4 08.306 Electrical Machines Drives A 2 1 - 50 3 100 3 08.307 Electronics Devices Lab TA - - 3 50 3 100 3 08.308 Electronics Circuits Simulation Lab A - - 3 50 3 100 3 TOTAL 16 5 8 400 800 29 TOTAL MARKS 1200 TOTAL CREDITS 29 Note: 08.306 shall be handled by faculty of Electrical Electronics Dept. 08.304 shall be handled by faculty of Electronics Communication Dept. BRANCH: APPLIED ELECTRONICS AND INSTRUMENTATION SEMESTER IV Course No. Name of Subject Weekly load hrs Max. Sessional Marks Exam Exam Duration Max. Hrs Marks Credits L T D/P 08.401 Engineering Mathematics III - Probability Random Processes TA 3 1 - 50 3 100 4 08.402 Humanities CTARFHD TA 3 - - 50 3 100 3 08.403 Signals Systems TA 3 1 - 50 3 100 4 08.404 Linear Integrated Circuits A 3 1 - 50 3 100 4 08.405 Digital Circuit Design A 2 1 - 50 3 100 3 08.406 Basic Instrumentation A 2 1 - 50 3 100 3 08.407 Digital Integrated Circuits HDL Lab A - - 4 50 3 100 4 08.408 Measurements Instrumentation Lab A - - 4 50 3 100 4 TOTAL 16 5 8 400 800 29 TOTAL MARKS 1200 TOTAL CREDITS 29 Note:08.401 shall be handled by faculty of Mathematics Dept.

slide 9:

9 Ekeeda - Applied Electronics and Instrumentation Engineering BRANCH: APPLIED ELECTRONICS AND INSTRUMENTATION SEMESTER V Course No. Name of Subject Weekly load hrs Max. Sessional Marks Exam Exam Duration Max. Hrs Marks Credits L T D/P 08.501 Engineering Mathematics IV - Complex Analysis Linear AlgebraTA 3 1 - 50 3 100 4 08.502 Digital Signal Processing TA 3 1 - 50 3 100 4 08.503 Computer Organisation Architecture TA 2 1 - 50 3 100 3 08.504 Control System Theory A 2 1 - 50 3 100 3 08.505 Power Electronics A 3 1 - 50 3 100 4 Elective I TA or A 2 1 - 50 3 100 3 08.507 Power Electronics Lab A - - 4 50 3 100 4 08.508 Electrical Machines Drives Lab A - - 4 50 3 100 4 TOTAL 15 6 8 400 800 29 TOTAL MARKS 1200 TOTAL CREDITS 29 Note: 08.501 shall be handled by faculty of Mathematics Dept. 08.508 shall be handled by faculty of Electrical Electronics Dept. Elective I 08.506 Logic Synthesis Verification TA 08.516 Fuzzy Systems Applications TA 08.526 System Software TA 08.536 Artificial Neural Networks TA 08.546 Digital Systems Design with VHDL TA 08.556 Professional Communication TA 08.566 CMOS Circuits Design A

slide 10:

10 Ekeeda - Applied Electronics and Instrumentation Engineering BRANCH: APPLIED ELECTRONICS AND INSTRUMENTATION SEMESTER VI Course No. Name of Subject Weekly load hrs Max. Sessional Marks Exam Exam Duration Max. Hrs Marks Credits L T D/P 08.601 Microcontroller Based System Design TA 3 1 - 50 3 100 4 08.602 VLSI Design TA 3 1 - 50 3 100 4 08.603 Optical Instrumentation A 2 1 - 50 3 100 3 08.604 Biomedical Instrumentation A 2 1 - 50 3 100 3 08.605 Communication Engineering A 3 1 - 50 3 100 4 Elective II TA or A 2 1 - 50 3 100 3 08.607 Microcontroller LabTA - - 4 50 3 100 4 08.608 Electronic Product Design Mini Project TA 1 - 3 50 3 100 4 TOTAL 16 6 7 400 800 29 TOTAL MARKS 1200 TOTAL CREDITS 29 Elective II 08.606 Speech Processing TA 08.616 Adaptive Signal Processing. TA 08.626 Digital Image Processing TA 08.636 Wavelets Applications TA 08.646 Digital Signal Processors TA 08.656 Optimization Techniques TA 08.666 Electromagnetics A

slide 11:

11 Ekeeda - Applied Electronics and Instrumentation Engineering Elective III 08.705 Real Time Operating Systems TA 08.715 Cryptography TA 08.725 Pattern Recognition TA 08.735 Optoelectronic Devices TA 08.745 Computer Vision TA 08.755 Biomedical Imaging Techniques A Elective IV 08.706 Mixed Signal Circuits Design TA 08.716 Embedded Systems TA 08.726 Intellectual Property Rights TA 08.736 MEMS TA 08.746 Low Power VLSI Design TA 08.756 Mechatronics A BRANCH: APPLIED ELECTRONICS AND INSTRUMENTATION SEMESTER VII Course No. Name of Subject Weekly load hrs Max. Sessional Marks Exam Duration Hrs Exam Max. Marks Credits L T D/P 08.701 Industrial Management TA 2 1 - 50 3 100 3 08.702 Robotics Industrial Automation A 3 1 - 50 3 100 4 08.703 Discrete-Time Control Systems A 3 1 - 50 3 100 4 08.704 Process Dynamics Control A 3 1 - 50 3 100 4 Elective III TA or A 2 1 - 50 3 100 3 Elective IV TA or A 2 1 - 50 3 100 3 08.707 Biomedical Signal Processing Lab A - - 3 50 3 100 3 08.708 Control system Lab A - - 3 50 3 100 3 08.709 Seminar TA - - 1 50 - - 1 08.710 Project Design TA - 1 - 50 - - 1 TOTAL 15 7 7 500 800 29 TOTAL MARKS 1300 TOTAL CREDITS 29 Note: 08.701 shall be handled by faculty of Mechanical Dept.

slide 12:

12 Ekeeda - Applied Electronics and Instrumentation Engineering Elective V 08.805 Distributed Control Systems A 08.815 Adaptive Control Systems A 08.825 Robust Control A 08.835 VLSI Structures for Signal Processing A 08.845 VLSI Device Process Simulation A Elective VI 08.806 Modelling Simulation of Dyanamic Systems A 08.816 Reversible Logic Design A 08.826 Control of Power Convertors A 08.836 Virtual Instrumentation A 08.846 Current Topics A BRANCH: APPLIED ELECTRONICS AND INSTRUMENTATION SEMESTER VIII Course No. Name of Subject Weekly load hrs Max. Sessional Marks Exam Exam Duration Max. Hrs Marks Credits L T D/P 08.801 Nano Electronics TA 2 1 - 50 3 100 3 08.802 Non Linear Control Theory A 3 1 - 50 3 100 4 08.803 Smart Sensors Networks A 2 1 - 50 3 100 3 08.804 Industrial Instrumentation A 3 1 - 50 3 100 4 Elective V A 2 1 - 50 3 100 3 Elective VI A 2 1 - 50 3 100 3 08.807 Process Control Lab A - - 4 50 3 100 4 08.808 Project TA - - 5 150 - - 3 08.809 Viva – Voce TA - - - - 3 100 2 TOTAL 14 6 9 500 800 29 TOTAL MARKS 1300 TOTAL CREDITS 29

slide 13:

13 Ekeeda - Applied Electronics and Instrumentation Engineering Syllabus I II Semester Common To All Branches ENGINEERING MATHEMATICS- 1 L-T-P : 2-1-0 Credits: 6 MODULE- 1 Applications of differentiation:– Definition of Hyperbolic functions and their derivatives- Successive differentiation- Leibnitz’ Theoremwithout proof- Curvature- Radius of curvature- centre of curvature- Evolute Cartesian polar and parametric forms Partial differentiation and applications:- Partial derivatives- Euler’s theorem on homogeneous functions- Total derivatives- Jacobians- Errors and approximations- Taylor’s series one and two variables - Maxima and minima of functions of two variables - Lagrange’s method- Leibnitz rule on differentiation under integral sign. Vector differentiation and applications :- Scalar and vector functions- differentiation of vector functions-Velocity and acceleration- Scalar and vector fields- Operator  - Gradient- Physical interpretation of gradient- Directional derivative- Divergence- Curl- Identities involving  no proof - Irrotational and solenoidal fields – Scalar potential. MODULE-II Laplace transforms:- Transforms of elementary functions - shifting property- Inverse transforms- Transforms of derivatives and integrals- Transform functions multiplied by t and divided by t - Convolution theoremwithout proof-Transforms of unit step function unit impulse function and periodic functions-second shifiting theorem- Solution of ordinary differential equations with constant coefficients using Laplace transforms. Differential Equations and Applications:- Linear differential eqations with constant coefficients- Method of variation of parameters - Cauchy and Legendre equations –Simultaneous linear equations with constant coefficients- Application to orthogonal trajectories cartisian form only. MODULE-III Matrices:-Rank of a matrix- Elementary transformations- Equivalent matrices- Inverse of a matrix by gauss-Jordan method- Echelon form and normal form- Linear dependence and independence of vectors- Consistency- Solution of a system linear equations-Non homogeneous and homogeneous equations- Eigen values and eigen vectors – Properties of eigen values and eigen vectors- Cayley Hamilton theoremno proof- Diagonalisation- Quadratic forms- Reduction to canonical forms-Nature of quadratic forms-Definitenessranksignature and index. REFERENCES 1. Kreyszig Advanced Engineering Mathematics 8 th edition Wiley Eastern. 2. Peter O’ Neil Advanced Engineering Mathematics Thomson 3. B.S.Grewal Higher Engineering Mathematics Khanna Publishers 4. B.V.Ramana Higher Engineering Mathematics Tata Mc Graw Hill 2006 5. Michel D Greenberg Advanced Engineering MathematicsPearson International 6. Sureshan J Nazarudeen and Royson Engineering Mathematics I Zenith Publications

slide 14:

14 Ekeeda - Applied Electronics and Instrumentation Engineering ENGINEERING PHYSICS L-T-P: 2-1- 0 Credits: 6 MODULE-I Oscillations and Waves Basic ideas of harmonic oscillations – Differential equation of a SHM and its solution. Theory of damped harmonic oscillations. Quality factor. Theory of forced harmonic oscillations and resonance. Types of waves. One dimensional waves – Differential Equation. Harmonic waves. Three dimensional waves - Differential Equation and solution. Plane waves and spherical waves. Energy in wave motion. Velocity of transverse waves along a stretched string. Electromagnetic Theory Del operator – grad div curl and their physical significance. Concept of displacement current. Deduction of Maxwell’s equations. Prediction of electromagnetic waves. Transverse nature of electromagnetic waves. E and H are at right angles. Poynting’s theorem qualitative only Physics of Solids Space lattice. Unit cell and lattice parameters. Crystal systems. Co-ordination number and packing factor with reference to simple cubic body centered cubic and face centered cubic crystals. Directions and planes. Miller indices. Interplanar spacing in terms of Miller indices. Super conductivity - Meissner effect. Type-I and Type-II superconductors. BCS theory qualitative. High temperature superconductors. Applications of superconductors. Introduction to new materials qualitative - Metallic glasses Nano materials Shape memory alloys Bio materials. MODULE- II Interference of Light Concept of temporal and spatial coherence. Interference in thin films and wedge shaped films. Newton’s rings. Michelson’s interferometer. Determination of wave length and thickness. Interference filters. Antireflection coating. Diffraction of Light Fresnel and Fraunhofer diffraction. Fraunhofer diffraction at a single slit. Fraunhofer diffraction at a circular aperture qualitative. Rayleigh’s criterion for resolution. Resolving power of telescope and microscope. Plane transmission grating. Resolving power of grating. Grating equation. X-ray diffraction. Bragg’s law. Polarization of Light Types of polarized light. Double refraction. Nicol Prism. Retardation plates. Theory of plane circular and elliptically polarized light. Production and analysis of circularly and elliptically polarized light. Polaroids. Induced birefringence. Photo elasticity – isoclinic and isochromatic fringes – photo elastic bench Special Theory of Relativity Michelson-Morley experiment. Einstein’s postulates. Lorentz transformation equations no derivation. Simultaneity. Length contraction. Time dilation. Velocity addition. Relativistic mass. Mass energy relation. Mass less particle. MODULE – III Quantum Mechanics Dual nature of matter. Wave function. Uncertainty principle. Energy and momentum operators. Eigen values and functions. Expectation values. Time Dependent and Time Independent Schrodinger equations. Particle in one dimensional box. Tunnelling qualitative. Statistical Mechanics Macrostates and Microstates. Phase space. Basic postulates of Maxwell-Boltzmann Bose-Einstein and Fermi-Dirac statistics. Distribution equations in the three cases no derivation. Bosons and Fermions. Density of states. Derivation of Planck’s formula. Free electrons in a metal as a Fermi gas. Fermi energy.

slide 15:

15 Ekeeda - Applied Electronics and Instrumentation Engineering Laser Einstein’s coefficients. Population inversion and stimulated emission. Optical resonant cavity. Ruby Laser Helium-Neon Laser Carbon dioxide Laser qualitative. Semiconductor Laser qualitative. Holography. Fiber Optics - Numerical Aperture and acceptance angle. Types of optical fibers. Applications. REFERENCE: Sears Zemansky University Physics. XI Edn. Pearson Frank Leno Introduction to Optics. III Edn. Pearson J.C. Upadhyaya Mechanics. Ram Prasad Sons David J Griffiths Introduction to Electrodynamics III Edn Pearson M Ali Omar Elementary Solid State Physics. Pearson S O Pillai Solid State Physics. New Age International Publishers John R Taylor Chris D Zafiratos Michael A Dubson Modern Physics for Scientists and Engineers. II Edn Prentice Hall of India Eugene Hecht Optics. IV Edn Pearson Robert Resnick Introduction to Special Relativity. John Willey and Sons Richard L Libboff Introduction to Quantum Mechanics. IV Edn Pearson Donald A Mcquarrie Statistical Mechanics. Vivo Books Mark Ratner Daniel Ratner Nanotechnology. T.A. Hassan et al A Text Book of Engineering Physics. Aswathy Publishers Trivandrum B. Premlet Advanced Engineering Physics Phasor Books Kollam. LIST OF DEMONSTRATION EXPERIMENTS Newton’s Rings – Determination of wave length. Air Wedge – Diameter of a thin wire Spectrometer – Plane transmission grating – wavelength of light. Spectrometer – Refractive indices of calcite for the ordinary and extraordinary rays. Laser – Diffraction at a narrow slit. Laser – Diffraction at a straight wire or circular aperture. Michelson’s interferometer – Wavelength of light. Michelson’s interferometer – Thickness of thin transparent film. Polarization by reflection – Brewster’s law. Computer stimulation – superposition of waves. Computer stimulation – study of E H. Gauss’ law Ampere’s law Pattern of Question Paper University examination is for a maximum of 100 marks in 3 hour duration. The syllabus is spread in 3 modules. The question paper will consist of two parts A and B. Part A contains short answer questions for 40 marks. This part contains 10 questions without any choice each of 4 marks uniformly taken from all modules. Part B contains long answer questions for 60 marks. From each module this part contains 3 questions out of which 2 are to be answered each of 10 marks. Long answer questions from all the 3 modules will form 60 marks.

slide 16:

16 Ekeeda - Applied Electronics and Instrumentation Engineering ENGINEERING CHEMISTRY L-T-P: 2-1-0 Credits: 6 MODULE-I Electrochemistry - Electrodes- Electrode potential- Origin of electrode potential- Helmotz double layer- Nernst equation and application- Reference electrodes- Standared hydrogen electrode- Saturated calomel electrode- Quinhydron electrode-Determination of P H using these electrodes- Concentration cells- Fuel cells- Secondary cells- Lead acid cell- Nickel cadmium cell- Lithium-ion cell. - Coductometric and Potentiometric titrations acid base oxidation reduction and precipitation titrations. 12hrs Corrosion and its control- Theories of corrosion chemical corrosion and electrochemical corrosion- Galvanic series- Types of corrosion Concentration cell corrosion Stress corrosion Galvanic corrosion - Factors affecting corrosion nature of metal and nature of environment and different methods of corrosion control corrosion inhibitors cathodic protection. 5hrs Protective coatings- Metallic coatings- Chemical conversion coatings- paint 4hrs Nano materials- Introduction-Classification-preparation laser abrasion technique and sputtering technique- Chemical method reduction-Properties and Applications of nano materials-Nano tubes- Nano wires. 4hrs MODULE-II Water treatment- Types of hardness- Degree of hardness- Related problems- Estimation of hardness- by EDTA method- Sludge and scales in boilers- Priming and foaming- Boiler corrosion- Water softening methods Lime-soda process Ion exchange methods-Internal treatments colloidal carbonate phosphate and calgon conditioning- Domestic water treatment- Methods of disinfection of water-Desalination process Reverse osmosis electro dialysis- Distillation. 12hrs Envirnmental damages and prevention- Air pollution- CFCs and ozone depletion- Alternative refrigerents-Green house effect-Water pollution- BOD and COD- Waste water treatment- Aerobic - Anaerobic and USAB processes. 3hrs Thermal methods of analysis-Basic principles involved in Thermo gravimetry Differential thermal analysis and applications. 2hrs Spectroscopy- Molecular energy levels-Types of molecular spectra- Electronic spectra Classification of electronic transitions- Beer Lamberts law Vibrational spectra mechanism of interaction and application Rotational spectra Determination of bond length and application. NMR spectra Basic principle chemical shift spin-spin splitting 6hrs Chromatography- General principles- High performance liquid chromatography- Gas chromatography. 2hrs MODULE-III Polymers- Classifications- Mechanism of polymarisation Addition free radical cationic anionic and coordination polymarisation- Thermoplastics and thermosetting plastics-Compounding of plastics- Moulding techniques of plastics Compression Injection Transfer and Extrusion moulding- Preparation properties and uses of PVC PVA PMMA Nylon PET Bakelite Urea formaldehyde resin- Silicon polymers- Biodegradable plastics. Elastomers- structure of natural rubber- vulcanisation- synthetic rubbers Buna-S Butyl rubber and Neoprene 12hrs Organo electronic compounds -Super conducting and conducting organic materials like Polyaniline polyacetylene and polypyrrol and its applications. 2hrs Fuels- Calorific value- HCV and LCV-Experimental determination of calorific value-Theoretical calculation of calorific value by Dulongs formula - Bio fuels -Bio hydrogen and Bio-diesel 5hrs Lubricants- Introduction-Mechanism of lubrication- solid and liquid lubricant- Properties of lubricants-Viscosity index- flash and fire point- cloud and pour point- aniline value. 4hrs Cement- Manufacture of Portland cement- Theory of setting and hardening of cement 2hrs

slide 17:

17 Ekeeda - Applied Electronics and Instrumentation Engineering LAB-EXPERIMENTS DEMONSTRATION ONLY 1. Estimation of total hardness in water using EDTA. 2. Estimation of chloride ions in domestic water. 3. Estimation of dissolved oxygen. 4. Estimation of COD in sewage water. 5. Estimation of available chlorine in bleaching powder. 6. Estimation of copper in brass. 7. Estimation of iron in a sample of heamatite. 8. Determination of flash and fire point of a lubricating oil by Pensky Marten’s apparatus. 9. Potentiometric titrations. 10. Preparation of buffers and standardisation of P H meter. 11. Determination of molarity of HCl solution P H -metrically. 12. Determinations of PH using glass electrode and quinhydron electrode. REFERENCES H.A. Willard L.L. Merrit and J.A. Dean Instrumental methods of analysis A.K. De Environmental Chemistry K.J.Klauhunde Nanoscale materials in chemistry B.R. Gowariker Polymer science B.W.Gonser Modern materials V.Raghavan Material Science and engineering. A first course L.H. Van Vlack Elements of Material science and Engineering J.W.Goodby Chemistry of liquid crystals S.Glasstone A text book of physical chemistry P.C. Jain Engineering Chemistry Juhaina Ahad Engineering Chemistry Shashi Chawla A text book of Engineering Chemistry R. Gopalan D.Venkappayya S. Nagarajan Engineering Chemistry J.C. Kuriakose and J. Rajaram Chemistry of Engineering and Technology volume I II Goyal and Harmendra Goeal Engineering Chemistry Ane Students Edition Thiruvananthapur

slide 18:

18 Ekeeda - Applied Electronics and Instrumentation Engineering ENGINEERING GRAPHICS L- T-D: 1-0-2 CREDITS: 6 INTRODUCTION: Introduction to technical drawing and its language. Lines lettering dimensioning scaling of figures symbols and drawing instruments. 1 sheet practice MODULE 1 PLAIN CURVES: Conic sections by eccentricity method. Construction of ellipse: i Arc of circles method ii Rectangle method ii Concentric circles method. Construction of parabola i Rectangle method ii Tangent method. Construction of hyperbola i Arc of circles method ii given ordinate abscissa and the transverse axis iii given the asymptotes and a point on the curve. Construction of Tangent and Normal at any point on these curves MISCELLANEOUS CURVES: Construction of Cycloid Epicycloid and Hypocycloid Involute of a circle. Archimedian spiral Logarithmic spiral and Helix. Construction of Tangent and Normal at any point on these curves PROJECTION OF POINTS AND LINES: Types of projections Principles of Orthographic projection. Projections of points and lines. Determination of true length inclination with planes of projection and traces of lines. MODULE II PROJECTION OF SOLIDS: Projection of simple solids such as prisms pyramids cone cylinder tetrahedron octahedron sphere and their auxiliary projections. SECTIONS OF SOLIDS: Types of cutting planes section of simple solids cut by parallel perpendicular and inclined cutting planes. Their projections and true shape of cut sections. DEVELOPMENT OF SURFACES: Development of surfaces of i simple solids like prisms pyramids cylinder and cone ii Cut regular solids. MODULE III ISOMETRIC PROJECTION: Isometric scale Isometric view and projections of simple solids like prisms pyramids cylinder cone sphere frustum of solids and also their combinations. INTERSECTION OF SURFACES: Intersection of surfaces of two solids as given below. i Cylinder and cylinder iiPrism and prism. iii Cone and Cylinder Only cases where the axes are perpendicular to each other and intersecting with or without offset. PERSPECTIVE PROJECTION:Principles of perspective projection definition of perspective terminology. Perspective projection of simple solids like prisms and pyramids in simple positions. CAD: Introduction to CAD systems Benefits of CAD Various Soft wares for CAD Demonstration of any one CAD software. General Note: i First angle projection to be followed ii Question paper shall contain 3 questions from each module except from CAD. Students are required to answer any two questions from each module. iii Distribution of marks Module -I 2 x 16 32 Module -II 2 x 17 34 Module III 2 x 17 34 100

slide 19:

19 Ekeeda - Applied Electronics and Instrumentation Engineering REFERENCES Luzadder and Duff Fundamentals of Engineering Drawing N. D. Bhatt Engineering Drawing K. Venugopal Engineering Drawing and Graphics P.S. Gill Engineering Graphics P.I. Varghese Engineering Graphics K.R. Gopalakrishnan Engineering Drawing Thamaraselvi Engineering Drawing K.C. John Engineering Graphics K.N. Anil Kumar Engineering Graphics

slide 20:

20 Ekeeda - Applied Electronics and Instrumentation Engineering ENGINEERING MECHANICS L-T-P: 2 - 1 – 0 Credits: 6 MODULE I 20 HRS Idealizations of Mechanics- Elements of vector algebra Statics of rigid bodies-Classification of force systems- principle of transmissibility of a force- composition and resolution- Resultant and Equilibrant of coplanar concurrent force systems-various analytical methods- - Lami’s theorem method of resolution- Conditions of equilibrium- Moment of a force couple properties of couple- Varignon’s theorem- Resultant and equilibrant of coplanar non-concurrent force systems- Conditions of equilibrium. Equilibrium of rigid bodies-free body diagrams.simple problems Types of supports - types of beams - types of loading- Support reactions of simply supported and overhanging beams under different types of loading. Forces in space equations of equilibrium Vector approach. Friction-Laws of friction-angle of friction- cone of friction- ladder friction- wedge friction. MODULE II 20 HRS Properties of surfaces- centroid of composite areas- Theorems of Pappus-Gouldinus- Moment of inertia of areas Parallel and perpendicular axes theorems- Radius of Gyration- moment of inertia of composite areas. Dynamics: Kinematics-Combined motion of translation and rotation-instantaneous centre motion of link motion of connecting rod and piston wheel rolling without slipping. Relative velocity - basic concepts-analysis of different types of problems Kinetics- Newton’s laws of translatory motion- D’Alembert’s principle- Motion of lift- Motion of connected bodies. MODULE III 20 HRS Work Power and Energy - Work-Energy principle-Impulse Momentum. Collision of elastic bodies-Law of conservation of momentum-Direct and oblique impact between elastic bodies and impact with fixed plane. Curvilinear motion- D’Alembert’s principle in curvilinear motion- Mass moment of inertia of rings solid discs and solid spheres no derivations requiredAngular momentum-Angular impulse. Kinetics of rigid bodies under combined translatory and rotational motion – work – energy principle for rigid bodies. Centrifugal and centripetal forces – motion of vehicles on curved paths in horizontal and vertical planes – super elevation – stability of vehicles moving in curved paths qualitative ideas only. Simple harmonic motion – vibration of mechanical systems - basic elements of a vibrating system – spring mass model – undamped free vibrations – angular free vibration – simple pendulum. REFERENCES: Beer Johnston “Vector Mechanics for Engineers – Statics and Dynamics” Tata Mc-Graw Hill Publishing Company Limited New Delhi 2005. Irving. H. Shames “Engineering Mechanics” Prentice Hall Book Company 1966. Timoshenko S. Young D. H. “Engineering Mechanics” Mc-Graw Hill –International Edition Popov “Mechanics of Solids” Pearson Education2007 Kumar K.L. “Engineering Mechanics” Tata Mc-Graw Hill Publishing Company Limited New Delhi 1998. Rajasekaran S. Sankarasubramanian G. “Engineering Mechanics” Vikas Publishing House Private Limited New Delhi 2003. Tayal A K “Engineering Mechanics- Statics and Dynamics” Umesh Publications Delhi2004 Benjamin J. “Engineering Mechanics” Pentex Book Publishers and Distributors Kollam 2008 Note Question For University Examination:- Part A – 8 compulsory questions covering entire syllabus 5 marks each. 5 x 8 40 Part B – Three questions of 10 marks from each module out of which two should be answered 10 x 2 x 3 60.

slide 21:

21 Ekeeda - Applied Electronics and Instrumentation Engineering BASIC CIVIL ENGINEERING L-T-P: 2- 1 - 0 Credits: 6 MODULE I Surveying: Object and Principles of Surveying. Linear Measurements: Direct measurements - Tape chain only - Ranging out survey lines-Taking measurements of sloping ground - Errors - Tape correction problems. Levelling: Levelling instruments - Level Dumpy Level Tilting Level Levelling Staff. Measurements in levelling - Temporary adjustments of a level holding the staff reading the staff - Principles of leveling - recording measurements in the field book - reduction of level - height of collimation method only simple examples. Contour maps Brief description only. Computation of areas - Mid ordinate rule average ordinate rule Trapezoidal rule Simpson’s rule examples- Introduction to Distomat Total Station GPS Brief description only MODULE II Building construction: Selection of site for buildings - types of buildings - Components of buildings. Foundation: Different types - Spread footing Isolated footing Combined footing Mat foundation¸ Pile foundation description only. Safe Bearing Capacity of Soil: Importance of determination of the Safe Bearing Capacity of Soil brief description only. Super structure: Masonry - stone masonry brick masonry –Types- desirable qualities of stone and brick. Partition: Materials used for making partition - plywood particle boards glass. Doors windows ventilators : Types - materials used for the construction of doors and windows - wood steel Aluminium. Plastering: Mortar – properties - Preparation of Cement mortar Painting: Preparation of surfaces for painting - plastered wood and steel surfaces- Types of paint - enamel emulsion distemper. Flooring: Types - mosaic tiles ceramic tiles marble granite and synthetic materials. Roofing: Selection of type of roof -flat roof sloping roof -Concrete roof tiled roof. Selection of roof covering materials. GI Sheet AC Sheet PVC Sheet MODULE III Concrete: Ingredients- cement aggregate and water. Qualities of ingredients brief description only. Tests on Cement - consistency initial and final setting times. Compressive strength -IS Specifications. Aggregates – desirable qualities of fine and coarse aggregates Plain Cement Concrete PCC: preparation-proportioning-mixing of concrete. Steel-common types used in construction- Mild Steel HYSD Steel and their properties. Reinforced Cement Concrete RCC-advantages of RCC over Plain Cement Concrete. Elementary ideas on pre-cast and pre-stressed concrete constructions. Building services – vertical transportation – stairs – types escalators and elevators ramps brief description only. Plumbing services- brief description of water supply and sewage disposal arrangements for residential buildings. REFERENCE: Adler R. Vertical Transportation for Buildings American Elsevier Publishing Company New York.1970 B.C Punmia “Surveying Leveling” Vol. – I Laxmi publicationsP LtdN.Delhi 2004 Rangwala. Building MaterialsCharotar publishing house 2001 Rangwala “Building Construction” Charotar Publishing House. 2004 S.K. Roy “Fundamentals of Surveying” Prentice-Hall of India New Delhi.2004 Rangwala.“Water Supply and Sanitary Engineering” Charotar Publishing House. 1990

slide 22:

22 Ekeeda - Applied Electronics and Instrumentation Engineering Moorthy “Building Construction” Modern Publishing House distributor. 1957 Jha and Sinha “Construction and Technology” Narayanan and Lalu Mangal ”Introduction to Civil Engineering”Phasor BooksKollam. Santha Minu “Basic Civil Engineering” Karunya PublicationsTrivandrum Note: The question paper will consists of two parts. Part I and part II.. Part I is Compulsory covering the entire syllabus for 40 marks. It contains 8 questions of 5 marks each. Part II is to cover 3 modules. There will be two questions 20 marks each from each module out of which one from each module is to be answered. 20 X 3 60

slide 23:

23 Ekeeda - Applied Electronics and Instrumentation Engineering BASIC MECHANICAL ENGINEERING L-T-P/D: 2-1-0 Credits: 6 MODULE I Thermodynamics : Basic concepts and definitions of Zeroth law First law Second law of thermodynamics- concept of reversibility and entropy. p-v and T-s diagrams Air cycles: Carnot Otto and Diesel cycles-Air standard efficiency simple problems IC Engines: Working and comparison of two stroke and four stroke petrol and diesel engines - general description of various systems using block diagrams – air system fuel system ignition system and governing system. A brief description of CRDI MPFI GDI and Hybrid Vehicles Steam boilers: Classification – Cochran boiler Babcock and Wilcox boiler Benson boiler- fluidized bed combustion MODULE II Principles and fields of application of - compressors - reciprocating and centrifugal blower pumps- reciprocating centrifugal and jet pumps steam and hydraulic turbines- impulse and reaction gas turbine cycles- open and closed Elementary ideas of hydro electric thermal and nuclear power plants Refrigeration Air Conditioning: Refrigerants CFC free refrigerants. Vapor compression refrigeration system Comfort and Industrial air conditioning-typical window air conditioning unit general description only. MODULE III Mechanical Power transmission systems: Belt rope and gear drives-types comparison and fields of application-velocity ratio-slip simple problems friction disc single plate clutch gear trains no derivations. Manufacturing processes: Elementary ideas of casting forging rolling welding soldering and brazing Machining processes- turning taper turning thread cutting shaping drilling grinding milling simple sketches and short notes. Non conventional machining - Electro discharge machining EDM and Electro chemical machining ECM Principle application and advantages of C N C machine REFERENCES Spalding and Cole “Engineering Thermodynamics” Gill Smith and Zuirys “Fundamentals of IC Engines” Amstead Ostwald and Begeman “Manufacturing processes” Crouse “Automobile Engineering” Roy and Choudhary “Elements of Mechanical Engineering” Hajra Choudhary “Workshop Technology” R K Bensal “Fluid mechanics and machines” J Benjamin “Basic Mechanical Engineering” Note: Lectures are to be supplemented by demonstration in laboratories. Note: The question paper will consist of two parts. Part I is to be compulsory for 40 marks. This may contain 10 questions of 4 marks each. Part II is to cover 3 modules. There can be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 24:

24 Ekeeda - Applied Electronics and Instrumentation Engineering BASIC ELECTRICAL AND ELECTRONICS ENGINEERING L-T-P:2 –1-0 Credits 6 MODULE – I Elementary concepts - Kirchoffs laws - Magnetic Circuits - MMF field strength flux density reluctance – problems in series magnetic circuits. Review of electromagnetic induction - Faradays laws Lenzs law - statically induced and dynamically induced emf - self and mutual induction - inductance. Alternating current fundamentals - generation of alternating currents – waveforms - frequency - period - average and rms values - form factor. Phasor representation of alternating quantities - rectangular polar and exponential forms. Analysis of simple ac circuits – concept of impedance and admittance - phasor representation - j notation - power and power factor in ac circuits - active and reactive components. Solution of RL RC and RLC series circuits. Three phase systems - generation of three phase voltage - star and delta connection - relation between phase and line values of voltage and current - phasor representation - three wire and four wire systems. Measurement of power in three phase circuits two wattmeter method. Measurement of energy – working of 1-phase energy meter. MODULE – II Transformers - Principle of operation - EMF equation - constructional details of single phase and three phase transformers Methods of bulk generation of electric power. Block schematic of layout of generating stations - hydroelectric thermal and nuclear power plants. Renewable energy sources - solar wind tidal wave and geothermal energy. Bulk transmission of electric power - typical electrical power transmission scheme - need for high transmission voltage - substations - substation equipments. Primary and secondary transmission and distribution systems Different methods of wiring for LT installations. Schematic layout of LT switchboards. Earthing of installations - necessity of earthing - plate and pipe earthing. Protective fuses MCBs ELCBs and switches. Working of incandescent lamps -fluorescent lamps energy efficient lamps MODULE – III Diodes - PN junction diodes. V-I characteristics dynamic static resistance principle of working and V-I characteristics of Zener diode principle of Photo diode Solar cell LED. Rectifiers power supplies - block diagram description of a dc power supply circuit diagram working of half-wave full wave rectifier final equations of Vrms Vdc ripple factor and peak inverse voltage in each case principle of working of series inductor and shunt capacitor filters. Working of simple zener voltage regulator. Power devices – V – I characteristics and applications of SCR and Triac Working principle of UPS and SMPS Transducers – Resistance strain guage thermistor LVDT REFERENCES V.N. Mitlle “Basic Electrical Engineering” Tata McGraw Hill 1990. DP Kothari LJ Nagrath “Theory and Problems of Basic Electrical Engineering” Prentice Hall of India 2000. B.L. Thereja “A Text Book of Electrical Technology” Volume I S Chand Co New Delhi 1992. Francis M Fernandez “A Basic Course in Electrical Engineering” Rajath Publishers Ernakulam. TP Imthias Ahmed B. Premlet “Introduction to Electrical Engineering” Phaser Books Kollam

slide 25:

25 Ekeeda - Applied Electronics and Instrumentation Engineering Gopakumar “Introduction To Electronics and Communications” .Phasor Books Kollam Millman and Halkias "Integrated Electronics: Analog and digital circuits and systems" McGraw-Hill Book Co Edward Hughes “Electrical and Electronic Technology” Pearson Education 2002. ML Soni PU Guptha US Bhatnagar and A Chakrabarthy “A Text Book on Power System Engineering” Dhanpath Rai Sons New Delhi 1997 N.N.Bhargava “Basic Electronics and Linear Circuits” Tata McGraw Hill Rangan C.S. Sarma G.R. and Mani V.S.V. "Instrumentation Devices and Systems" Tata McGraw Hill 1992. Muhammad H. Rashid “Power Electronic Circuits Devices and Applications” Pearson education Asia 2003. Note : The question paper will consist of two parts. Part – A is to be compulsory for 40 marks 10 questions of 4 marks each. Part-B is to cover 3 modules for 60 marks. 50 choice- One out of two or two out of four from each module.

slide 26:

26 Ekeeda - Applied Electronics and Instrumentation Engineering BASIC COMMUNICATION AND INFORMATION ENGINEERING L-T-P: 2-1-0 Credits: 6 MODULE IQualitative Treatment a Bipolar junction transistors: NPN PNP transistors structure typical doping working of NPN transistor concepts of common base common emitter common collector configurations current gain of each input output characteristics of common emitter configuration comparison of three configurations with reference to voltage current gain input output resistances and applications. 6 hrs b Field effect Transistors: basic principles of JFET MESFET and MOSFET comparison with BJT. 3 hrs c Amplifiers Oscillators: circuit diagram working of common emitter amplifier function of each component in the circuit need of proper biasing frequency response voltage gain and 3dB bandwidth concepts of class A B AB and Class C power amplifiers circuit diagram working of push pull amplifiers concepts of feedback working principles of oscillators circuit diagram working of RC phase shift oscillator 7 hrs d Integrated circuits: advantages of ICs analog and digital ICs functional block diagram of operational amplifier ideal operational amplifier use as inverting amplifier non inverting amplifier summing amplifier integrator and comparator. 4 hrs e Digital ICs: logic gates realization of logic functions principle of combinational and sequential logic circuits flip flop JK logic families: TTL and CMOS Logic No internal diagram 4 hrs f IC fabrication: purification of silicon crystal growth wafer preparation. unit process: oxidation diffusion ion implantation epitaxy deposition photolithography. 4 hrs MODULE II Qualitative Treatment a Measurements: principle and block diagram of analog and digital multimeter working principle of CRT block diagram of CRO measurements using CRO principle of digital storage oscilloscope principle and block diagram of function generator. 5hrs b Radio communication: principle of AM FM wave forms bandwidths block diagrams of AM FM transmitters principle of AM FM demodulation comparison of AM FMprinciple block diagram of super heterodyne receiver. 4 hrs c Color television: TV Standards interlaced scanning block diagram of PAL TV transmitter receiver basic principles of cable TV CCTV system basic principles of HDTV basic principles of LCD Plasma displays. 5 hrs d Radar and navigation: principle of radar and radar equation block schematics of pulsed radar factors affecting range applications of radar in measurements and navigation. 4 hrs e Satellite communication: microwave frequency bands concept of geo-stationary satellite frequency bands used satellite transponder block diagram of earth station transmitter receiver advantages of satellite communication principle of Global Positioning SystemGPS. 3 hrs f Optical communication: block diagram of the optical communication system principle of light transmission through fiber concepts of Single Mode and Multi Mode optical fiber working principle of source semiconductor Laser detector PINAPD advantages of optical communication. 5 hrs MODULE III Qualitative Treatment a Computer Architecture: functional units: basic concept of ALU- data path and control memory hierarchy caches main memory virtual memory operating systems microprocessors - functional block diagram of 8085 9 hrs b Data communication: overview analog and digital data transmission transmission media digitization of wave forms PCM digital modulation techniques- ASK PSK FSK basic concepts of error detection parity checking. 6hrs

slide 27:

27 Ekeeda - Applied Electronics and Instrumentation Engineering c Mobile communication: basic principles of cellular communications concepts of cells frequency reuse principle and block diagram of GSM principle of CDMA WLL GPRS technologies.4hrs d Internet Technology: concepts of networking: client - server computing IP addresses domain names network interface unit - modem switching technologies- circuit switching and packet switching LANMANWAN World wide web network topologies communication protocols- TCP/IP Introduction to web languages-HTML XML internetworking concepts network devices- basic principles of router bridge switch network security- Firewall. 7 hrs REFERENCES Santiram Kal Basic Electronics – Devices Circuits and IT fundamentals PHI Louis.E.Frenzel Principles of Electronic Communication Systems TMH William Stallings Wireless Communications and Networks Pearson Education. M.Moris Mano Computer Architecture PHI Neil H E WesteKamran Eshraghian Principles of CMOS VLSI design – A system perspective Pearson Education Module 1f David A. Bell Electronic Instrumentation and Measurements PHI .Module 2a N N BhargavaD C KulshreshthaS C Gupta Basic Electronics Linear Circuits TMH ITL Education Solution Ltd. Introduction to Information Technology Pearson Education 5 th edition 2008 R.R. Gulati Monochrome and Colour Television New Age International Module 2 c K Gopakumar Introduction to Electronics Communication 3 rd edition 2008Phasor Publisher’sKollam This subject shall be handled by faculty of Dept.of Electronics and Communication. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 28:

28 Ekeeda - Applied Electronics and Instrumentation Engineering ENGINEERING WORKSHOPS L-T-P: 0-0-2 CREDITS: 4 Carpentry: Study of tools and joints. Practice in planning chiseling marking and sawing. Joints – Cross joint T joint Dove tail joint. B. Fitting: Study of tools Practice in filing cutting drilling and tapping. Male and female joints Stepped joints. C: Sheet Metal Work: Study of tools. Selection of different gauge GI sheets for jobs. Practice on riveted joints. Preparing tube joints frustums trays and containers. Plumbing: Study of tools. Details of plumbing work in domestic and industrial applications. Study of pipe joints cutting threading and laying of pipes with different fittings using PVC pipes. Use of special tools in plumbing work. E: Foundry: Study of tools. Preparation of sand moulding practice and demonstration of casting. F. Welding: Study of welding machines. Straight line practices Making of Butt joint T joint and Lap joint. G: Smithy: Study of tools. Demonstration on forging of square prism hexagonal bolt T bolt and Eye bolt. H: Machine Tools: Study and demonstration on working of machine tools. Lathe and Drilling machine. NOTE: For the university examination the student shall be examined in sections A B C D and E only.

slide 29:

29 Ekeeda - Applied Electronics and Instrumentation Engineering Syllabus III Semester ENGINEERING MATHEMATICS II CMPUNERFHBTA L-T-P : 3-1-0 Credits: 4 Module I Multiple Integrals: Double Integrals Cartisian only. Change of order of integration. Area enclosed by plane curves. Triple integrals. Volume of solids. Vector integration: Line and surface and volume integrals. Greens theorem in the plane. Stokes theorem and Gauss divergence theorem no proof. Module II Fourier series: Fourier series of periodic functions of period 2∏ and 2l. Dirichlet’s condition for convergence. Odd and even functions. Half range expansions. Fourier Transforms: Fourier integral theorem no proof- Fourier transforms – Fourier sine and cosine transforms inverse Fourier transforms properties Module III Partial differential equations: Formation of PDE. Solution of Lagranges linear equation. First order nonlinear equations – standard forms- Homogeneous PDE with constant coefficients. Application of PDE: Derivation of one dimensional Wave and Heat equations. Solution by separation of variables. Boundary value problems in one dimensional Wave and Heat equations. References: Kreyszig Advanced Engineering Mathematics 8 th Wiley Eastern. Peter O Neil Advanced Engineering Mathematics. B.S. Grewal Higher Engineering Mathematics Khanna Publications. B.V. Ramana Higher Engineering Mathematics Tata Mc Graw Hill. Michel D Greenberg Advanced Engineering Mathematics Pearson Question Paper The question paper shall consist of two parts. Part A 40 marks Ten compulsory questions of 4 marks each. Part B 60 marks Students must answer one out of two from each module. Each question carries 20 marks.

slide 30:

30 Ekeeda - Applied Electronics and Instrumentation Engineering SOLID STATE DEVICES TA L-T-P: 3-1-0 Credits: 4 Module I Crystal Structures-Planes and Directions. Elemental and compound semiconductors. Energy bands in solids intrinsic and extrinsic semiconductors Energy momentum relation for electrons in solids effective mass. Fermi-dirac distribution. Equilibrium and steady state conditions Equilibrium concentration of electrons and holes graphical and analytical representation Temperature dependence of carrier concentration. Carrier transport in semiconductors – drift conductivity and mobility variation of mobility with temperature and doping High Field Effects Hall effect. Excess carriers in semiconductors – Generation and recombination mechanisms of excess carriers quasi Fermi levels diffusion Einstein relations. Continuity equations. PN junctions - Contact potential Electrical Field Potential and Charge Density at the junction Energy band diagram Minority Carrier Distribution Ideal diode equation Electron and hole component of current in forward biased p-n junction effect of Temperature on I-V characteristics. Real diodes. High level injection effects. Diode capacitances switching transients. Module II Electrical Breakdown in PN junctions - Zener and avalanche break down abrupt PN junctions only Linearly graded junction - electric field built in potential junction capacitance. Metal Semiconductor contacts Energy band diagram of Ohmic and Rectifying Contacts Current Equation Comparison with PN Junction Diode. Hetero Junctions – Energy band diagram Applications. Bipolar junction transistor - current components Minority Carrier Distributions basic parameters Evaluation of terminal currents and dc parameters based on physical dimensions Switching Base width modulation Avalanche multiplication in collector-base junction Punch Through Base resistance Static I-V characteristics of CB and CE configurations. Module III Field Effect Transistors: JFET - principle of operation current equation static I-V characteristics and device parameters. MOS Capacitor - Ideal MOS Capacitor Energy Band Diagram Carrier Concentrations in the Space Charge Region C-V characteristics threshold voltage effect of real surfaces. MOSFET- Basic structure and principle of operation I-V characteristics Derivation of Drain Current Square Law Model Only and device parameters Channel length modulation Velocity saturation Body effect DIBL Hot Electron Effect Sub threshold Conduction. UJT PNPN diode SCR DIAC TRIAC and IGBT – Principles of operation and static characteristics no derivation Text Book: Ben G. Streetman: Solid State Electronic Devices 5/e Pearson Education. References: 1. M.S.Tyagi: Introduction to Semiconductor Materials and Devices John Wiley Sons2000. 2. Warner and Grung: Semiconductor Device Electronics Holt Rinhalt Winston 1991. 3. S.M.Sze: Physics of Semiconductor Devices 3/e Wiley Eastern. 4. Y.P.Tsividis: Operation and Modeling of the MOS Transistor Mc Graw Hill 1986. 5. V.Suresh Babu: Solid State Devices Technology Sanguine Bangalore 2005. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. 70 Numerical Problems and derivations

slide 31:

31 Ekeeda - Applied Electronics and Instrumentation Engineering NETWORK ANALYSIS TA L-T-P: 3-1-0 Credits: 4 Module I Elements of Network Analysis- Mesh and node analysis. Network theorems: Thevenin’s theorem Norton’s theorem Super position theorem Reciprocity theorem Millman theorem Maximum Power Transfer theorem. Signal representation - Impulse step pulse and ramp function waveform synthesis. Laplace Transform in the Network Analysis: Initial and Final conditions Transformed impedance and circuits Transform of signal waveform. Transient analysis of RL RC and RLC networks with impulse step exponential pulse and sinusoidal inputs use of initial and final value theorems. Networks with transformed impedance and dependent sources. Module II The concept of complex frequency - Network functions for the one port and two port - driving point and transfer functions - Poles and Zeros of network functions and their locations and effects on the time and frequency domain. Restriction of poles and zeros in the driving point and transfer function. Time domain behavior from the pole - zero plot. Frequency response plots - Magnitude and phase plots Plots from s-plane phasors Bode plots - phase margin and gain margin. Parameters of two-port network – impedance admittance transmission and hybrid - Conversion formulae. Attenuators – propagation constant types of attenuators – T π and Balanced. Module III Resonance in series and parallel circuits- resonant frequency- bandwidth - Q factor Selectivity. Coupled circuits single tuned and double tuned circuits coefficient of coupling Image Impedance Characteristic impedance and propagation constant. Introduction to filters- Filter approximations - poles of the Butterworth Chebyshev and inverse Chebyshev functions expression for transfer function of Butterworth Low pass filter design for 2nd order and 3rd order low pass Butterworth filters Bessel-Thomson response. Frequency transformations - transformations to high pass band pass and band elimination. Text Book: 1. Van Valkenburg: Network Analysis 3/ePearson Education. 2. Roy Choudhary: Networks and Systems New Age International2005. 3. Wai-Kai Chen: Passive and Active Filters-- Theory and Implementations John WileySons1986. Reference: 1. Franklin F. Kuo: Network Analysis and Synthesis 2/e Wiley India. 2. M.E. Van Valkenburg: Analog Filter Design Saunder’s College Publishing1982. 3. V. K. Aatre: Network Theory and Filter Design Wiley Eastern. 4. Smarajit Ghosh Network Theory – Analysis Synthesis PHI 2008 5. Sudhakar and S. P. Shyam Mohan: Circuits and Network Analysis3/e TMH. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 75 Problems

slide 32:

32 Ekeeda - Applied Electronics and Instrumentation Engineering PROGRAMMING IN C++ DATA STRUCTURES TA L-T-P: 2--0 -2 Credits: 4 Module I Basic stricture of a C++ program Types and Declarations: Types - Boolean character integer Floating point void enumerated. Conditional statements and loops. Declarations- structure multiple names scope initialization. Function declaration argument passing value return. Recursive functions. Macros. Classes - objects private public and protected variables. Arrays one and two dimensional. Pointers new operator and delete operator for dynamic memory management. Pointer to arrays constants reference pointer to void pointer to function. Module II Function overloading operator overloading friend function derived class inheritance polymorphism virtual function templates Files and streams. Library functions for File and String operations. Introduction to Standard Template Library. Programming tools- make files debuggers revision control systems exception handling. Module III Data Structures: Linked single and double lists -basic operations. Linked list implementation of: Stack -basic operations Queues - basic operations. Binary Tree- basic operations. Binary Search Tree Binary tree traversal inorder preorder postorder. Sorting Algorithms- bubble sort shell sort merge sort quick sort heap sort. Comparison of Sorting Algorithms by Speed and Space. Orderbig-O Average Best Worst case running time of Algorithms. Text Book: 1. B Stroustrup The C++ Programming Language 3/e Edition Addison Wiley. 2. AV Aho and JD Ullman Data Structures and Algorithms Pearson Education 2005. 3. D Samenta Classic Data Structures PHI 2005. Reference: 1. E Balaguruswamy Object Oriented Programming with C++3/e TMH. 2. Richard F Gilbert Behrouz A Forouz Data Structures A pseudocode Approach with C++ Thomson 2001. 3. Langsam Data Structures Using C and C++ 2/e Pearson Education. 4. Brain W Kernighan The Practice of Programming Pearson Education 2007. 5. Bruce Eckel Thinking in C++ volumeI and volumeII Pearson Education 2001. This subject shall be handled by faculty of Dept.of Electronics and Communication in the Colleges. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Programs

slide 33:

33 Ekeeda - Applied Electronics and Instrumentation Engineering FUNCTIONAL ELECTRONICS A L-T-P: 3-1-0 Credits: 4 Module I DC analysis of BJTs - graphical analysis BJT as amplifier. Small signal equivalent circuits Low frequency  model only.Transistor Biasing circuits Stability factors Thermal runaway. Small signal analysis of CE CB CC configurations gain input and output impedance. BJT as switch. – switching circuits – astable monostable bistable multivibrators and schmitt trigger circuits. MOSFET I-V relation graphical analysis load lines small signal parameters small signal equivalent circuits body effect biasing of MOSFETs amplifiers. Module II Analysis of Single stage discrete MOSFET amplifiers – small signal voltage and current gain input and output impedance of Basic CS amplifier CS amplifier with source resistor CS amplifier with source by pass capacitor source follower amplifier CG amplifier. High frequency equivalent circuits of MOSFETs Miller effect short circuit current gain s-domain analysis amplifier transfer function. Low frequency and high frequency response of CS CG CD amplifiers. Multistage MOSFET amplifiers – cascade and cascode amplifiers and its dc analysis small signal analysis. Frequency response of cascade and cascode amplifiers. . Module III Feed back amplifiers - Properties of negative feed back. The four basic feed back topologies-Series- shunt series-series shunt-shunt shunt-series. Analysis and design of discrete circuits in each feedback topologies MOSFET based - Voltage Current Transconductance and Transresistance amplifiers loop gain input and output impedance. Stability of feedback circuits. Power amplifiers: Class A B AB C circuits - efficiency and distortion. Biasing of class AB circuits. Transformerless power amplifiers. Text Books: 1. Sedra and Smith : Microelectronic Circuits 4/e Oxford University Press 1998. 2. Donald A Neamen. : Electronic Circuit Analysis and Design 3/eTMH. References: 1. Spencer Ghausi : Introduction to ElectronicCircuit Design Pearson Education 2003. 2. Roger T. Howe Charles G. Sodini : Microelectronics: An Integrated Approach Pearson Education 1997. 3. R E Boylstad and L Nashelsky : Electronic Devices and Circuit Theory 9/ePearson Education. 4. Balbir KumarShail B Kumar: Electronic Devices Circuits PHI 2008. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50Problems

slide 34:

34 Ekeeda - Applied Electronics and Instrumentation Engineering ELECTRICAL MACHINES DRIVES A L-T-P: 2-1-0 Credits: 3 Module I D.C. MACHINES: Principle and theory of operation of D.C. generator - generator action- Constructional features of D.C. Machines- Armature reaction- Commutation- Characteristics of shunt series and compound generators- Principle of operation of D.C. motor- Back E.M.F- Torque equation- characteristics of shunt series and compound motors- Losses and efficiency calculations- Applications of D.C. Motors- Motor starters- speed control of D.C. motors. TRANSFORMERS: Principle constructional details of shell and core type transformer- EMF equation- No-load and on load operation. Test on Transformer- Equivalent circuit - regulation and efficiency calculations- Auto transformer- Principle of operation – phasor diagram - three phase transformer connections. Module II SYNCHRONOUS MACHINES: Construction and principle of operation of alternators - EMF equation- determination of regulation by synchronous impedance method - Theory of operation of synchronous motor - Phasor Diagram- Methods of starting. INDUCTION MACHINES: Construction and principle of operation – classification of induction motor- Torque equation – Torque slip characteristics - Maximum toque - Effect of rotor resistances - starting and speed control. Module III SPECIAL MACHINES: Types of single phase motor – Double field revolving theory – Capacitor start capacitor run motors – Shaded pole motor – Repulsion type motor – Universal motor – Stepper motor. DRIVES: DC Motor Drives - Introduction to Motor drives Criteria for selecting drive component. Equivalent circuit of DC Motor Block diagram and transfer function. Text books: 1. Nagrath I J and Kothari D P “ Electrical Machines” 2/eTata McGraw-Hill. 2. Sen P C “Principles of Electrical Machines and Power Electronics”2/e John Wiley Sons. 3. R.Krishnan Electric Motor drives – Modeling Analysis and Control PHI 2008. Reference: 1 Bimbhra P S “Electrical Machinery” Khanna Publishers 2004. 2. Gupta B R and Vandana Singhal “Fundamentals of Electrical Machines” New Age International Publishers 2001. 3. Say M G “Alternating Current Machines” 5/e Pitman. 4. Theodore Wildi Electrical Machines Drives and Power Systems 6/ePearson Education. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Problems

slide 35:

35 Ekeeda - Applied Electronics and Instrumentation Engineering ELECTRONIC DEVICES LAB TA : 0-0-3 Credits: 3 1. Characteristics of Diodes Zener diodes 2. Characteristics of Transistors CE CB 3. Characteristics of JFET and MOSFET 4. Characteristics of SCR 5. Frequency responses of RC Low pass and high pass filters. RC Integrating and Differentiating circuits. 6. Zener Regulator with without emitter follower. 7. RC Coupled CE amplifier - frequency response characteristics. 8. MOSFET amplifier CS - frequency response characteristics. 9. Clipping and clamping circuits. 10. Rectifiers-half wave full wave Bridge with and without filter- ripple factor and regulation. Internal Marks: 50 1. Attendance - 10 2. Class work - 20 3. Practical internal Test - 20 Note: For University examination the following guidelines should be followed regarding award of marks a Circuit and design - 20 b Performance Wiring usage of equipments and trouble shooting - 15 c Result - 35 d Viva voce - 25 e Record - 05 Practical examination to be conducted covering entire syllabus given above. Students shall be allowed for the University examination only on submitting the duly certified record. The external examiner shall endorse the record.

slide 36:

36 Ekeeda - Applied Electronics and Instrumentation Engineering ELECTRONICS CIRCUITS SIMULATION LAB A L-T-P: 0-0-3 Credits: 3 PART –A 1. Feed back amplifiers current series voltage series. Gain and frequency response. 2. Power amplifiers transformer less Class B and Class AB. 3. Differential amplifiers using MOSFETs. Measurement of CMRR. 4. Cascode amplifiers using MOSFETs. Frequency response. 5. Astable Monostable and Bistable multivibrator circuits. 6. Schmitt trigger circuits. 7. Series voltage regulator circuits – short circuit and fold back protection. 8. Bootstrap sweep circuit. PART-B Introduction to SPICE Models of resistor capacitor inductor energy sources VCVS CCVS Sinusoidal source pulse etc and transformer. Models of DIODE BJT FET MOSFET etc. sub circuits. Simulation of following circuits using spice Schematic entry of circuits using standard packages. Analysis- transient AC DC etc.: 1. Potential divider. 2. Integrator Differentiator I/P PULSE – Frequency response of RC circuits. 3. Diode Characteristics. 4. BJT Characteristics. 5. FET Characteristics. 6. MOS characteristics. 7. Full wave rectifiers Transient analysis including filter circuits. 8. Voltage Regulators. 9. Sweep Circuits. 10. RC Coupled amplifiers - Transient analysis and Frequency response. 11. FET MOSFET amplifiers. 12. Multivibrators. Internal Marks: 50 1. Attendance - 10 2. Class work - 20 For Part A only 3. Practical internal Test - 20 For Part B only Note: For University examination the following guidelines should be followed regarding award of marks a Circuit and design - 20 b Performance Wiring usage of equipments and trouble shooting - 15 c Result - 35 d Viva voce Including Part-B also - 25 e Record - 05 Practical examination university to be conducted covering entire syllabus given above in part-A. Students shall be allowed for the University examination only on submitting the duly certified record Including Part-A and Part-B. The external examiner shall endorse the record.

slide 37:

37 Ekeeda - Applied Electronics and Instrumentation Engineering Syllabus IV Semester ENGINEERING MATHEMATICS - III PROBABILITY RANDOM PROCESSES TA L-T-P : 3-1-0 Credits: 4 Module I Random Variables - Discrete and continuous random variables - Probability density functions and distribution functions - Mathematical Expectations - Properties - Binomial distribution Poisson distribution Uniform distribution Mean and Variance - Problems - Normal distribution Rayleigh distribution Problems - Chebychev’s inequality without proof - Problems - Markov inequality without proof - Two dimensional random variables - Joint probability distribution - Marginal and conditional probability function - Independent random variables - Problems - Correlation and Covariance - Problems - Central limit theorem - Problems. Module II Random processes - Classification of random processes and examples - Continuous random process - Discrete random process - Continuous random sequence - Discrete random sequence - Stationary process and evolutionary process - Strict sense stationary process - Wide sense stationary process - Auto correlation auto covariance and cross correlation - Their relation properties and problems - Poisson process - Mean variance autocorrelation of the Poisson process - Properties no proof - Problems - Module III Markov process - Classification of Markov process - Markov chain - Transition probability matrix. Ergodic process - Time average of random process - Power spectral density and its properties - Spectral representation of real WSS process - Wiener-Khinchin Theorem no proof - Calculation of spectral density given the autocorrelation function - Linear time invariant systems - WSS process as input - Autocorrelation and spectral density as output mention only - Binomial Wiener and Gaussian process statements only References: 1. Papoulis and S.U. Pillai Probability random variable and stochastic processes 4/e TMH 2. Veerarajan Probability and Random Processes 2/e TMH 3. Probability and Statistics Schaum Series 4. Stark and Woods Probability and Random processes with Application to Signal Processing3/ePearson Education. 5. Gubner Probability and Random Processes for Electrical and Computer Engineers Cambridge University Press2006. Question Paper: The question paper shall consist of two parts. PartA 40 marks shall contain 10 compulsory questions of 4 marks each. PartB 60 marks will have 3 modules . There shall be 2 questions from each module 20 marks each out of which one is to be answered. Note: This subject shall be handled by the faculty of Mathematics Department

slide 38:

38 Ekeeda - Applied Electronics and Instrumentation Engineering HUMANITIES CTAFRHB L-T-P : 3-0-0 Credits: 3 PART I ECONOMICS 2 Periods per week Module I Definition of Economics – Basic Concepts Goods – Choice of techniques – Production possibility curve National Income concepts – GNP – GDP – NNP – Per Capita Income – Three Sectors of the Economy – Primary – Secondary Tertiary Sector – Significance of Money. Meaning of Demand and Supply – Types of demand – Determinants of Demand – Demand forecasting Production function – Law of Variable proportion – Returns to scale – Least cost combination of inputs – Cost concepts – Cost output relationship Module II Inflation – causes of inflation – measures to control inflation – Demand – Pull inflation – Cost push inflation – effects of Inflation – effects of inflations comparison between inflation and deflation. India’s Economic crisis in 1991 – New economic policy – Global Financial meltdown in 2008 – Applicability of Keynesian Theory to UDC’s. Stock Market and present scenario – Industrial sector past and present – Industry Analysis – Electronics – Chemical – Automobile – FMCG Industry. Environment and Development – Basic Issues – Sustainable Development and Environmental Accounting – Population – Resources and the Environment – Poverty and the Environment – Growth versus the Environment – The Global Environment . Module III PART II ACCOUNTANCY 1 Period per week Book-Keeping and Accountancy – Elements of Double Entry-Book-Keeping – rules for journalizing – Ledger accounts – Cash book – Banking transactions – Trial Balance – Method of Balancing accounts – the journal proper simple problems. Final accounts: preparation of trading and profit and loss Account – Balance sheet with simple problems – Introduction to Accounting packages Description only References: K.K. Dewett Modern Economic theory Michael – Todaro Economic Development Addison Wesley Longman Ltd. Mohinder Kumar Sharma – Business Environment in India D.M. Mithani – Money Banking International Trade and Public Finance Himalaya publishing House New Delhi. Rudder Dutt and K.P.M Sundaran – Indian Economy Hal R. Varian – Intermediate Micro Economics Koutsiannis second Edition Micro Economics Double Entry book Keeping – Batliboi A Systematic approach to Accounting : Dr. K.G. Chandrasekharan Nair Question Paper Note: Part I and Part II to be answers in separate answer books. Part – I Economics Part A – 30 Marks short answers covering entire syllabus 3x1030 Part B – 40 marks 50 choice one out of two or two out of four from each module Part – II Accountancy Three questions covering entire syllabus out of which two questions has to be answered 2x1530

slide 39:

39 Ekeeda - Applied Electronics and Instrumentation Engineering SIGNALS SYSTEMS TA L-T-P : 3-1-0 Credits: 4 Module I Classification and Representation of Continuous time and Discrete time signals. Signal operations. Continuous Time and Discrete Time Systems- Classification Properties. Representation - Differential Equation representation of Continuous Time Systems. Difference Equation Representation of Discrete Systems. Continuous Time LTI systems and Convolution Integral Discrete Time LTI systems and linear convolution. Module II Frequency Domain Representation of Continuous Time Signals- Continuous Time Fourier Series: Convergence. Continuous Time Fourier Transform: Properties. Frequency Domain Representation of Discrete Time Signals- Discrete Time Fourier Transform: Properties Sampling Theorem aliasing reconstruction filter sampling of band pass signals Relation between Digital Frequency and Analog Frequency of sampled signals. Fourier Series Representation of Discrete Time Periodic Signals. Module III Laplace Transform – ROC – Inverse transform – properties – Analysis of Continuous LTI systems using Laplace Transform – unilateral Laplace Transform. Relation between Fourier and Laplace Transforms. Z transform – ROC – Inverse transform – properties – Analysis of Discrete Time LTI systems using Z transforms – unilateral Z transform. Relation between DTFT and Z-Transform. Random process - Stationarity Ergodicity Correlation Power spectral density – properties. Wiener - Khinchin Theorem. Transmission of Random process through a linear Filter. Gaussian process – properties. Text Books: 1. Simon Haykin: Signals Systems John- Wiley 2003. 2. Simon Haykin: Communication Systems4/eJohn -Wiley. Reference: 1. Alan V. Oppenheim Alan S.Willsky: Signals and Systems 2/e PHI. 2. Rodger E. Ziemer: Signals Systems - Continuous and Discrete 4/ePearson Education. 3. B P. Lathi: Signal Processing Linear systems Oxford Publication2000. 4. Hwei P.Hsu: Signals and Systems McGraw Hill1995. 5. M.J.Roberts: Signals and Systems TMH2003. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 75 Problems derivations and proofs

slide 40:

40 Ekeeda - Applied Electronics and Instrumentation Engineering LINEAR INTEGRATED CIRCUITS A L-T-P: 3-1-0 Credits: 4 Module I MOS differential amplifiers large signal and small signal analysis of differential amplifiers Input resistance Voltage gain CMRR Non-ideal characteristics of differential amplifier. Frequency response of differential amplifiers. Current sources Active load cascode load current mirror circuits multistage differential amplifiers. MOS Operational Amplifiers single stage- cascode and folded cascode two stage op-amp op-amp with output buffer frequency compensation and slew rate in two stage Op-amps. Ideal op-amp parameters Non ideal op-amp. Effect of finite open loop gain bandwidth and slew rate on circuit performance. Inverting and non-inverting amplifier summing amplifier integrator differentiator Differential amplifiers Instrumentation amplifiers V to I and I to V converters Comparators precision rectifiers Oscillators -Phase-shift Wein-Bridge multivibrators-AstableMonostable Schmitt Trigger Square and triangular waveform generator. Module II Active Filters : Transfer function First order Active Filters Standard second order responses KRC filters Multiple-Feedback filters State variable and biquad filters Filter approximation Cascade design Generalized Impedance Converter. Switched capacitor Switched capacitor Integrator Switched capacitor filter IInd order SC filter based on Tow-Thomas. Data converters: Sample and hold characteristics DAC and ADC specification DAC architecture - Weighted resistor R-2R ladder network Current steering Charge Scaling DACs Cyclic DAC Pipeline DAC ADC architecture: Dual slope Counter ramp Successive approximation Flash ADC Pipeline ADC Oversampling ADC. Module III Operational Transconductance amplifier. Emitter coupled pair as simple multiplier Variable- Transconductance Multiplier Multiplier applications Voltage Controlled Oscillator: Features of 566 VCO Applications of VCO. Phse-Locked Loop : Basic PLL topology and principle transient response of PLL Linear model of PLL Major building blocks of PLL – analog and digital phase detector VCO filter. Analysis of lock range and capture range. Applications of PLL. Monolithic PLL - IC LM565 and 4046 CMOS PLL. Monolithic Voltage Regulators – IC 723 and its Applications Current boosting short circuit and fold back protection Three pin fixed and variable voltage regulators. Power Amplifier: LM380 power audio amplifier. Text Books: 1. Sergio Franco: Design with Operational Amplifiers and Analog Integrated Circuits 3/eTMH. 2. Behzad Razavi : Design of Analog CMOS IC TMH2003. References: 1. Gayakwad : Op-Amps and Linear Integrated Circuits 4/e PHI /Pearson Education. 2. K. R. Botkar : Integrated Circuits 9/e Khanna Publishers. 3. Baker R Jacob: CMOS Circuit Design Layout and Simulation PHI2005. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Problems and Analysis

slide 41:

41 Ekeeda - Applied Electronics and Instrumentation Engineering DIGITAL CIRCUIT DESIGN A : 2-1-0 Credits: 3 Module I Binary codes BCD Review of Boolean algebra and Binary arithmetic. Sum of product and product of sum simplification Canonical forms Karnaugh map upto 4 variables completely and incompletely specified functions. Quine McCluskey method upto 5 variables. Decoders encoders multiplexers demultiplexers. Adders subtractors ripple carry and look ahead carry adders BCD adders binary comparators. Description of Logic gates decoders encoders adders using VHDL. Integrated circuit technologies – Characteristics and Parameters.TTL circuits –NANDOpen collector tristate gates. CMOS logic circuits - NOR NOT NAND. Comparison. Module II Sequential circuit models flip flops – SR JK D T Master slave characteristic equations Flip flop timing specifications. Binary counters – Synchronous and Asynchronous design Counters for random sequence- design. Registers Universal shift registers Ring and Johnson counter. Multivibrators – astable and monostable multivibrators using gates 74121 and 74123. Memories – ROM PROMs RAMs – Basic structure Static and dynamic RAMs. Description of flip flops registers and counters using VHDL. Module III Mealy and Moore models state machine notation state diagram state table transition table exciting table and equations synchronous sequential analysis – principles examples. Construction of state diagrams sequential circuit design – state equivalence state reduction state assignment techniques Analysis of synchronous sequential circuits – examples. Asynchronous sequential circuit – basic structure equivalence and minimization minimization of completely specified machines State simplification of redundant states Incompletely specified machines. Text Book: 1. Yarbrough John M Digital logic- Application and Design Thomson Learning New Delhi2002. 2. John F Wakerly Digital Design Principles and Practice 4/ePearson Education. Reference: 1. C.H. RothJr. Fundamentals of Logic Design 5/e Thomson Learning. 2. Thomas L Floyd R.P Jain: Digital Fundamentals 8/e Pearson Education. 3. M.Moris Mano Michael D.Ciletti Digital Design 3/e Pearson Education. 4. B.Somanathan NairDigital Electronics and Logic DesignPHI2008. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problems and design

slide 42:

42 Ekeeda - Applied Electronics and Instrumentation Engineering BASIC INSTRUMENTATION A L-T-P: 2-1-0 Credits: 3 Module I Transducers - classification – general input output configuration – static and dynamic characteristics. Resistance Transducers-Principles of operation characteristics of resistance transducers resistance potentiometer. Inductive Transducers-Induction potentiometer variable reluctance transducers LVDT eddy current transducers synchros and resolver. Transducers-variable air gap type variable area type variable permittivity type capacitor micro phone. Module II Generalized configurations of Instruments – Functional element Analog and Digital modes Null and deflection methods I/O configuration Methods of correction. Generalised performance characteristics of Instruments – Static characteristics - Calibration Accuracy Precision and bias. System accuracy calculation. Sensitivity linearity threshold resolution hysterisis and dead space. Generalised static stiffners and Input impedance. Measurement of resistance inductance and capacitance using bridges - Wheatstone Kelvin Maxwell bridges. Megger and Q meter. Electronic multimeter Audio Power Meter RF power meter True RMS Meter. Module III Digital instruments - the basics of digital instruments digital measurement of time interval phase frequency Digital LCR meter and digital voltmeter. The cathode ray tube Deflection amplifier Resolution Wave form display Oscilloscope time - base Dual trace oscilloscope Dual beam and split beam. Oscilloscope controls-measurements of voltage frequency and phase pulse measurements Lissajous figures Z axis modulation oscilloscope probes. Special oscilloscopes – Operation controls and application of Analog storage Sampling and Digital storage oscilloscopes. Power Scopes – working and its application. Text Books: 1. Murthy D. V. S “Transducers and Instrumentation” PHI 1995. 2. Ernest Doebelin Measurement Systems 5/e McGraw Hill 3. Helfrick Cooper Modern Electronic Instrumentation and Measurement Techniques5/e PHI. 4. D.A.Bell Electronic Instrumentation and Measurements PHI 2003. Reference: 1. D. Patranabis Principles of Electronic Instrumentation PHI 2008. 2. Clyde F Coombs Jr. Electronic Instrument Hand book 3/e 1999 Mc Graw Hill. 3. Joseph J. Carr Elements of Electronic Instrumentation and Measurements 3/e Pearson Education. 4. Patranabis “Sensors and Transducers” 2/e PHI. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum25Problems and design

slide 43:

43 Ekeeda - Applied Electronics and Instrumentation Engineering DIGITAL INTEGRATED CIRCUITS HDL LAB A L-T-P: 0-0-4 Credits: 4 1. Characteristics of TTL and CMOS gates. 2. Arithmetic circuits - Half adder Full adder 4 bit adder/subtractor BCD adder-7483 circuits. 3. Astable and Monostable multivibrators using CMOS gates 4. Realization of RS T D JK and Master Slave flip-flops using gates. 5. Shift Registers Ring counter and Johnson counter using gates and 7495 6. Counters up/down counters asynchronous synchronous using flip flops. 7. Counter ICs 749074937495. 8. Sequence generator. 9. BCD to Decimal and BCD to 7 segment decoder display 10. Multiplexers Demultiplexers using gates and ICs. 7415074154 11. Realization of combinational circuits using MUX DEMUX. 12. Astable Monostable using 74123 555. 13. Waveform and pattern generation using Multiplexers. 14. Simulation using VHDL Internal Evaluation Only : Logic gates Decoders Encoders Half adder and Full adder Flip-flops counters etc. in VHDL Internal Marks: 50 1. Attendance - 10 2. Class work - 20 3. Practical internal Test - 20 Note: For University examination the following guidelines should be followed regarding award of marks. a Circuit and design - 20 b Performance Wiring usage of equipments and trouble shooting - 15 c Result - 35 d Viva voce - 25 e Record - 05 Practical examination to be conducted covering entire syllabus given above without 14 th expt. Students shall be allowed for the University examination only on submitting the duly certified record. The external examiner shall endorse the record.

slide 44:

44 Ekeeda - Applied Electronics and Instrumentation Engineering MEASUREMENTS INSTRUMENTATION LAB A L-T-P: 0-0-4 Credits: 4 1. Op amp measurements : input offset voltage input offset current open loop gain common mode input resistance slew rate CMRR full power band width comparison of different classes of opamps 2 expts 2. Op Amp basic circuits – Inverting and Non-inverting Amplifier Integrator Comparator. 3. OPAmp Circuits : Astable and Monostable multivibrators Schmitt trigger Triangular waveform generator Wein bridge Oscillators. 4. Universal active filters using Op-Amps 741/747/ 324 5. ADC DAC using ICs. 6. Instrumentation amplifier differential amplifiers using Op-Amps measurement of CMRR 7. Transducer measurements. a. Diode thermometer b. LVDT c. Strain gauge. d. Pressure transducer. e. Thermocouple RTDS f. Photocells 8. Voltage regulator - LM 723 based circuit with fold back and short circuit protection. 9. Phase locked loops frequency to voltage converter voltage to frequency converter 10. Programmable logic controllers – ladder diagrams 11. Design of temperature transmitter using RTD. 11. Design of cold junction compensation circuit. 12. Design of IC temperature transmitter. 13. Design of Linearization circuit for thermistor. 14. Design of pressure transmitter. 15. Performance evaluation of pressure gauges using Dead weight tester. 16. Measurement of level using capacitance probe differential pressure transmitter. Internal Marks: 50 1. Attendance - 10 2. Class work - 20 3. Practical internal Test- 20 Note: For University examination the following guidelines should be followed regarding award of marks. a Circuit and design - 20 b Performance Wiring usage of equipments and trouble shooting - 15 c Result - 35 d Viva voce - 25 e Record - 05 Practical examination to be conducted covering entire syllabus given above. Students shall be allowed for the University examination only on submitting the duly certified record. The external examiner shall endorse the record.

slide 45:

45 Ekeeda - Applied Electronics and Instrumentation Engineering Syllabus V Semester ENGINEERING MATHEMATICS – IV COMPLEX ANALYSIS AND LINEAR ALGEBRA TA L-T-P : 3-1-0 Credits: 4 Module I Complex Differentiation - Limits Continuity and differentiation of complex functions. - Analytic functions – Cauchy Riemann equations in Cartesian form proof of necessary part only - Properties of analytic functions - Harmonic functions - Determination of harmonic conjugates - Milne- Thomson method. Conformal mapping - The transformations w 1/z w z 2 w z + 1/z w sin z w cos z bilinear transformations Module II Complex Integration – Line integral - Cauchy’s integral theorem - Cauchy’s integral formula - Power series - Taylor’s and Laurent’s series - Zeroes Poles and singularities - Residues and 2 Ï€ Residue theorem -Evaluation of real definite integrals - f sin θ cosθ dθ f x dx 0 with no poles on the real axis- proof of theorems not required Module III Partitioned matrices and matrix factorization - LU decompositions - Vector space and subspace - Null space and Column spaces - Bases - Co-ordinate systems - Dimension of vector space - Rank - Change of basis - Inner product space - Length and orthogonality - Orthogonal sets - Orthogonal projection - Gram-Schmidt process - Least square problem - Quadratic form - Constrained optimization of quadratic forms - Singular value decomposition proof of the theorem are not included References: Peter O’neil Advanced Engineering Mathematics Thomson Learning. Erwin Kreizig Advanced Engineering Mathematics Wiley Eastern. BS Grewal Higher Engineering Mathematics Khanna Publishers. David C Lay Linear Algebra with Applications Pearson Education Schaum Series Linear Algebra. Kenneth Hoffmann and Ray Kunze Linear Algebra PHI. Gareth Williams Linear Algebra with Applications Jones and Bartlett publications Gilbert Strang Linear Algebra with Applications Thomson Learning Question Paper: The question paper shall consist of two parts. PartA 40 marks shall contain 10 compulsory questions of 4 marks each. PartB 60 marks will have 3 modules . There shall be 2 questions from each module 20 marks each out of which one is to be answered. Note: This subject shall be handled by the faculty of Mathematics Department.

slide 46:

46 Ekeeda - Applied Electronics and Instrumentation Engineering DIGITAL SIGNAL PROCESSING TA L-T-P : 3-1-0 Credits: 4 Module I The Discrete Fourier Transform –Frequency Domain Sampling Properties of DFT Linear Filtering Methods Based on the DFT Frequency Analysis of Signals using DFT. Computation of DFT - FFT Algorithms Radix 2 only Efficient computation of DFT of Two Real Sequences and a 2N-Point Real Sequence Linear Filtering and Correlation using DFT. Introduction to DCT and properties. Module II Design of FIR Filters- Symmetric and Antisymmetric FIR Filters FIR Filters using Window method and Frequency Sampling Method Design of Optimum Equiripple Linear-Phase FIR Filters. Design of IIR Digital Filters from Analog Filters- IIR Filter Design by Impulse Invariance IIR Filter Design by Bilinear Transformation Frequency Transformations in the Analog and Digital Domain. Filter structures: FIR Systems- Direct Form Cascade Form and Lattice Structure. IIR Systems- Direct Form Transposed Form Cascade Form and Parallel Form. Module III Analysis of finite word length effects- Quantization noise round off errors input and output quantization error limit cycles in IIR filters round off errors in FFT algorithm. Multi-rate Digital Signal Processing- Decimation and Interpolation Time domain and Frequency Domain Interpretation Sampling Rate Conversion Multistage Implementation of Sampling-Rate Conversion Applications of Multi-rate Signal Processing- Sub band Coding Trans-multiplexers. Computer architecture for signal processing - Architecture of TMS320C6713 processor. Programming Tools for DSP Processors. Text Books A.V. Oppenheim Ronald W Schafer: Discrete Time Signal Processing 2/e PHI. Sanjith K Mitra : Digital Signal Processing 2/e Tata Mc Graw Hill. Rulph Chassaing Digital Signal Processing and Applications with the C6713 and C6416 DSK Wiley Interscience. Apte Digital Signal Processing. 2/eWiley India. Reference: 1. John G Proakis Dimitris G Monolakis-Digital Signal Processing 4/e PHI. 2. Emmanuel C Ifeachor Barrie W Jervis: Digital Signal Processing 2/ePearson Education /PHI. 3. P.P. Vaidyanathan Multirate Systems and Filter Banks PHI 2004. 4. Uwe Mayer-BAeses Digital Signal Processing with FPGAs 2/e Springer. 5. Vinay K. Ingle and John ProakisDigital Signal Processing A MATLAB based Approach Books- cole publishing company2000. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 75 Problems derivations and proofs

slide 47:

47 Ekeeda - Applied Electronics and Instrumentation Engineering COMPUTER ORGANISATION ARCHITECTURE TA L-T-P 2-1-0 Credits: 3 Module I Functional units of a Computer – Von Neuman Architecture -Steps involved in Execution of an instruction – Harvard Architecture - Performance measurement and benchmarking. Instruction formats – Survey of addressing modes - CISC and RISC. Computer Arithmetic – Implementing addition subtraction multiplication and division – Floating point representation – Floating point operations their implementation. MIPS – architecture addressing modes instruction format and instruction set. Translating a C program into MIPS assembly language and machine codes. Module II Design of Data path and Control based on MIPS instruction set - Design of data path to cover the basic memory reference lw sw arithmetic/logical add sub and or and branch instructions – Control of the single clock cycle implementation – Multi cycle implementation – Fetch Decode Execute and Memory access cycles – Design of control unit – Hardwired and Microprogrammed control. Enhancing Performance – Pipelining – overview of pipelining – pipelined datapath – pipelined control – data hazards and forwarding – data stalls – control hazards – branch hazards. Module III Memory system hierarchy – Caches – Mapping techniques – Replacement algorithm – Cache performance – interleaved memory – Virtual memory – Address translation. Interfacing I/O to Processor. Interrupts and Direct Memory Access. CISC microprocessors. Architecture of Intel 8086 - CPU pin functions instruction cycle time addressing. Modes. VLIW architecture. Text Book: 1. David A Patterson John L Hennessy Computer Organisation and Design – The Hardware / Software Interface 3 /e Elsevier Publications. 2. David A Patterson John L HennessyComputer Architecture – A Quantitative Approach 4 /e Elsevier Publications. 3. Douglas V Hall Microprcessors and Interfacing Programming and Hardware 2/e TMH. References: 1. Hayes Computer Architecture and Organisation 3/e Mc Graw Hill. 2. Kai Hwang Advanced Computer Architecture: Parallelism Scalability and Programmability 1993 Mc Graw Hill. 3. Carl Hamacher Zvonko Vranesic Safwat Zaky Computer Organisation 5 /e Mc Graw Hill. This subject shall be handled by faculty of Dept.of Electronics and Communication. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 40 Problems and design

slide 48:

48 Ekeeda - Applied Electronics and Instrumentation Engineering CONTROL SYSTEM THEORY A L-T-P 2-1-0 Credits: 3 Module I Modeling of dynamic systems – Control Systems – Mechanical Electrical and Electronic Systems – Signal flow graphs – Linearization of nonlinear models. Mathematical modeling of Fluid systems and Thermal systems. Transient and steady state response analysis of first and second order systems. Root locus analysis – Plots – Rules for construction – Positive feedback and conditionally stable systems. Module II Routh’s stability criterion. Frequency response analysis – Bode diagrams – Polar plots – Nyquist stability – Stability analysis – Relative stability – Unity feed back systems. Module III Control system design by frequency response – Lead Lag and Leg-lead compensation. PID controls – Tuning rules of PID controllers – optimal sets of parameter values – Modifications of PID control schemes. Two degree of freedom control. Zero placement approach and design. Text Book: 1. Katsuhiko Ogata Modern Control Engineering 4/e Pearson Education. References: 1. Benjamin .C Kuo Automatic Control Systems 8/e PHI. 2. Norman S Nise Control System Engineering4/e John Wiley. 3. Richard C Dorf and Robert H Bishop Modern Control System. 9/e Pearson Education. 4. Dean Fredrick Joe Chow Feedback Control Problems using MATLAB Addison Wesley/PWS1995. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 75 Problems derivations and proofs

slide 49:

49 Ekeeda - Applied Electronics and Instrumentation Engineering POWER ELECTRONICS A L-T-P 3-1-0 Credits: 4 Module I Power electronics versus Linear electronics Classification of power processors and converters. Power semiconductor switches: Power diodes- structure static and dynamic characteristics power diode types. Power transistors- Power BJT Power MOSFET GTO and IGBT – structure and V/I characteristics Steady state and switching characteristics of BJT and Power MOSFET. Drive circuits - requirements and design of simple drive circuits for power BJT MOSFET and IGBT. Snubber circuits. Single phase and Three phase Rectifiers – Uncontrolled and Controlled rectifiers. Module II Switched mode regulators – Buck Boost Buck-Boost and Cuk dc-dc converters- analysis of waveforms and derivation of expression for output voltage voltage and current ripple under continuous conduction mode Selection of power switches. Overview of SMPS – Isolated converters – Flyback Forward Push-pull Half Bridge and Full bridge converters – waveforms and governing equations. Control of dc-dc converters Power supply protection Soft switching Study of PWM controller IC TL494 and UC1524. Module III Switched mode inverters – principles of PWM switching schemes for square wave and sine wave output. Single phase inverters – half bridge full bridge and push pull. Three phase inverters – Six step and Current controlled inverters. PWM and space vector modulation in three phase inverters. UPS – working principle and design On-line and off-line Battery charging circuits. Motor drives –v/f control for induction motors adjustable speed control of induction motor. Text Books: 1. L Umanand Power Electronics Essentials and Applications Wiley India 2009. 2. Ned Mohan et. al. Power Electronics :Converters Applications and Design John Wiley Sons. 3. Jamil Asghar Power Electronics 7 th print PHI2009. References: 1. Md. H. Rashid Power Electronics: Circuits Devices and Applications2/e PHI. 2. Michael Jacob Power Electronics Principle and Application Thomson Delmar Series. 3. Jai P. Agrawal Power electronic Systems: Theory and Design Pearson Education. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 questions shall be problems design and analysis

slide 50:

50 Ekeeda - Applied Electronics and Instrumentation Engineering LOGIC SYNTHESIS AND VERIFICATION TA L-T-P : 2-1-0 Credits: 3 Module I Graph theory - Directed and undirected graphs- Strongly Connected Components SCC Graph Traversal BFS DFS. General purpose methods for Combinatorial Optimization problems. Graph Optimization problems and Algorithms - Shortest Path - Critical Path- Graph Coloring - Graph Covering Heuristic and Exact Algorithms. Boolean Algebra - Partial Order Sets Boolean Functions - Hasse Diagram – Lattice Satisfiability Dont Care SDC- Observability Dont CareODC. Cube Representation of Boolean functions. Cofactors-Shannon cofactors Boolean Dierence Smoothing Consensus. Boolean Satisfiability SAT and Cover. Synthesis of Two Level Circuits:- Prime Implicants PI- Recursive Computation of PI Unate Covering Problem-Binate Covering Problem- Branch and Bound Algorithms. Module II Data structures for graphs Binary Decision DiagramsBDD OBDD ROBDD- Representation of Logic Functions in BDD - Algorithms for BDD operations. Heuristic Minimization of Two level circuits- local search - Equivalence and Tautology- Recursive Complementation-Essential Primes -Multiple Valued Logic. Espresso Algorithm- Expand Reduce Irredundant Essentials. Sequential Systems - models -FSM-: Minimization of FSM FSM Traversal FST FSM Equivalence Checking. FSM Traversal using BDD. Minimization of Completely and Incompletely specified State Machines- State Encoding Algorithms- Decomposition and Encoding. Module III Finite Automata-Deterministic Multiple Level Combinational Logic Optimization: Introduction Models and Transformation for Combinational Networks. Optimization of Logical Networks. Representation of Functions in Factored form - Division- Kernels and Co-Kernels. Rectangle Covering Heuristic Factoring Algorithms - Decomposition and Restructuring. Finite AutomataDFA DFA Synthesis w-regular automata Formal Verification with L-Automata. Reference: 1. Gray D Hatchtel Fabio Somenzi Logic Synthesis and Verification Algorithms Kluwer Academic Publications 2002. 2. Sabih H Gerez Algorithms for VLSI Design Automation John Wiley and Sons 2004. Reading: 1. Giovanni De Micheli Synthesis and Optimization of Digital Circuits McGraw-Hill. 2. Soha Hassova Tsutomu Sasao Logic Synthesis and Veri_cation Kluwer Academic Pub. 3. Jakko T. Astola Radomir S Stankovi: Fundamentals of Switching Theory and Logic Design A Hands on Approach Springer. 4. Rudiger Ebendt Gorschwin Fey Advanced BDD Optimization Springer. 5. Frederick J Hill GR Peterson Computer Aided Logical Design with Emphasis on VLSI 4/eJohn Wiley and sons. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 logical/numerical problems derivation and Proof

slide 51:

51 Ekeeda - Applied Electronics and Instrumentation Engineering 08.516 FUZZY SYSTEMS APPLICATIONS TA L-T-P: 2-1-0 Credits: 3 Module I Introduction to fuzzy sets and systems-crispness vagueness uncertainty and fuzziness. Basics of fuzzy sets membership functions support of a fuzzy set height normalized fuzzy set α cuts. Properties of Fuzzy set .Operation on fuzzy set-complement intersection union equality subset hood. Law of excluded middle law of contradiction concentration dialation contrast intensification. Type- 2 fuzzy sets. Module II Extension Principle and its application. Fuzzy relation operations on fuzzy relation projection max- mini composition cylindrical extension.Reflexivitysymmetry and transcitivity.Fuzzy prepositions fuzzy connectives linguistic variables linguistic hedges Fuzzy quantifiers. Approximate reasoning or fuzzy inference generalized modus ponens GMP generalized modus Tollens GMT Fuzzy rule based system. Fuzzification and defuzzifictioncentroidcentre of sums. Module III Applications-Fuzzy logic controllers Types of FLC- Types of Fuzzy rule formats. Block diagram of fuzzy logic controller.multi input multi output control system. Fuzzy control of a cement kiln Automatic train operating system Fuzzy pattern recognition. Inverted pendulum aircraft landing control air conditioner control. Reference: 1. Timothy J. Ross Fuzzy Logic with Engineering Applications 2/e McGraw Hill. 2. Zimmerman H.J. Fuzzy Set Theory and its Applications 4/eSpringer.2001. 3. Ganesh M. Introduction to Fuzzy Sets and Fuzzy Logic PHI2006. 4. Driankov D. Hellendoorn H. Reinfrank M.An Introduction to Fuzzy Control Narosa1996. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 75 logical/numerical problems derivation and Proof

slide 52:

52 Ekeeda - Applied Electronics and Instrumentation Engineering 08.526 SYSTEM SOFTWARE TA L-T-P : 2-1-0 Credits: 3 Module I System Software - Language processors: Introduction Language processing activities fundamentals of Language processing fundamentals of Language specifications Language processor development tools. Data structures for Language processing : Search data structures Allocation data structures Scanning and Parsing : Scanning Parsing. Assemblers : Elements of assembly language programming A simple assembly scheme Pass structure of assemblers. Macros and Macroprocessors : Macro definition and call Macro expansion Nested macrocalls Module II Compilers and Interpreters :Aspects of compilation Memory allocation Interpreters. Linkers: Relocation and linking concepts. Software tools: Software tools for program development Operating systems - Evolution of OS systems. Processes :Process definition Process control Interacting Processes Implementation of interacting Processes Threads. Scheduling :Scheduling policies Job Scheduling Process Scheduling . Deadlocks: Definitions Handling Deadlocks Deadlock detection and resolution Deadlock avoidance. Module III Process synchronization: Implementing control synchronization Semaphores. Memory management : Memory allocation preliminaries Contiguous Memory allocation noncontiguous Memory allocation Virtual memory using paging Virtual memory using segmentation. Protection and security :Encryption of data Protection and security mechanisms. Distributed operating systems : Definition and examples Design issues of Distributed operating systems Networking issues Communication protocols. Text book 1. D M Dhamdhere System programming and Operating systems 2 nd revised edition TMH. References 1. Milan Milenkovic Operating Systems 2 /e TMH. 2. John J Donovan System Programming2/e McGraHill. 3. Leland L Beck System Software: An Introduction to System Programming 3 /e Pearson Education. This subject shall be handled by faculty of Dept.of Electronics and Communication . Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 53:

53 Ekeeda - Applied Electronics and Instrumentation Engineering 08.536 ARTIFICIAL NEURAL NETWORKS TA L-T-P : 2-1-0 Credits: 3 Module I Introduction to Neural Networks - Applications - Biological Neurons and Neural Networks - Typical architecture of Artificial Neural Networks - Common activation functions - Mc. Culloh Pitts Neuron - Single Layer Perceptrons – linear Separability - Learning Algorithms - Hebbian Learning Gradient Descent Learning Widrow Hoff Learning The Generalized Delta Rule learning rates Practical Considerations. ANN models for Pattern Classification – Hebb NetPerceptrons ADALINE networks Architecture Algorithm and simple Applications Module II Pattern Association :- training algorithm for pattern association - Hetro Associative Network Auto Associative Network Hopfield Network BAM Network - Architecture Algorithm and simple Applications. Network based on competition:- Fixed weight competitive Network-Maxnet Mexican Hat and Hamming Net - Self Organizing Maps - Kohonen Network- Learning Vector Quantization Counter Propagation Network Architecture Algorithm and simple Applications Optimization problems solving using neural networks. Module III Adaptive Resonance Theory:- ART 1 and ART 2 – Back Propagation Networks Learning with Momentum - Radial Basis Function Networks - Conjugate Gradient Learning Bias and Variance Under-Fitting and Over-Fitting – Bolzmann machine Architecture Algorithms and Applications Text Books: Simon Haykin Neural Networks 2/e Prentice Hall. Laurene Fausett Fundamentals of Neural Networks Pearson Education 2004. Christopher M. Bishop Neural Networks for Pattern Recognition by Oxford University Press 1995. Reference: James A Freeman David M. Skapura Neural Networks- Algorithms Applications and Programming Techniques Pearson Education. Bose Liang Neural Network Fundamentals Mc Graw Hill. Martin T. Hagan Howard B. Demuth Mark Beale Neural Network Design Vikas Thomson learning. S N Sivanandham S Sumathi S N Deepa Introduction to Neural Networks using Matlab 6.0 Tata Mc.Graw Hill 2005 Question Paper: The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Problem and Algorithm

slide 54:

54 Ekeeda - Applied Electronics and Instrumentation Engineering 08.546 DIGITAL SYSTEMS DESIGN WITH VHDL TA L-T-P : 2-1-0 Credits: 3 Module I Concepts of Digital System Design Process Design automation Hardware Description Language Hardware Simulation Oblivious Simulation Event-driven simulation Hardware synthesis Level of abstraction. VHDL Language - Design methodology based on VHDL Elements of VHDL Describing components Packages Top down design verification Top-down design with VHDL Subprograms VHDL operators Conventions Syntax. Basic concept in VHDL - Characterizing Hardware Language Timing Concurrency Hardware modeling Objects Classes Signal assignment Inertial delay Mechanism Transport delay mechanism Comparing Inertial and Transport. Concurrent and Sequential Assignment: concurrent assignment Event and Transaction Delta delay Sequential placement of transaction. Module II Type declaration and usage Enumeration type for multi value logic Array declaration VHDL Operators subprogram parameters Types and overloading Array attributes Type attributes Signal attributes Entity attributes. Sequential processing - Process statement Signal assignment versus Variable assignment Sequential statements – IF CASE LOOP ASSERT WAIT etc. Concurrent assignment problem Passive processes. Structural Specification of Hardware - Inverter model NAND gate model Modeling Flip- Flops using VHDL Processes Logic Design of Comparator VHDL description of comparator VHDL Models for a Multiplexer VHDL description of a simple test-bench simulation Logic design of Latch Flip-flop VHDL model for Counter and Registers. Subprograms and Packages - Subprograms Functions Conversion functions Resolution functions Procedures. Packages Package declaration Deferred constants Subprogram declarations Package body. Aliases Qualified expressions User-defined attributes Generate statements Text I/O. Module III Data flow Description in VHDL - Multiplexing and data selection. Design of a serial adder with accumulator design of binary multiplier using VHDL Multiplication of signed binary numbers deign of binary dividers. State machine description – Derivation and realization of SM charts A sequence detector Allowing multiple active states Mealy and Moore machine Generic State Machine General data flow circuits Linked state machines. Design configurations - Default configurations Component configurations Mapping library entities Generics in configurations Architecture configurations. Synthesis - RTL description Constraints Attributes Technology libraries Translation Optimization Flattening Factoring Mapping to Gates. Designing with FPGA and CPLD Xilinx 4000 Series FPGAs and Altera Flex 10K series CPLDs. Text Books: 1. Wakerly J. F. Digital Design – Principles and Practices 4/ePearson Education. 2. Roth C. H. Digital System Design Using VHDL Cengage Learning2008. 3. J.Bhasker VHDL Primer 3/e Pearson Education India. References: 1. Mano M. M. and Ciletti M. D. Digital Design 4/e Pearson Education. 2. Perry D. L. VHDL Programming by Example 4/e TMH. 3. Brown S. and Vranesic Z. Fundamentals of Digital Logic with VHDL Design 2/eTMH. 4. Pedroni V. A. Circuit design with VHDL PHI2008. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem Design and Programs

slide 55:

55 Ekeeda - Applied Electronics and Instrumentation Engineering 08.556 PROFESSIONAL COMMUNICATIONTA L-T-P : 2-1-0 Credits: 3 Module I Written Communication: Fundamental Principles of clear writing – Style and tone in formal writing with Exercises. Grammar in context- focus areas – Tenses- Prepositions- Modals- Adjectives. Transformation of sentences. Reading comprehension. Précis-writing to express ideas through various kinds of essays. Module II Technical Writing – Definition- Description- Instructions and Writing Technical Papers. Transcoding - Interpreting Graphics and Writing coherent paragraphs-Writing for focus. Mind Map- Organisation of Coherent Paragraphs and Essays. Module III Business Administrative and E-Correspondence - Business Reports- Technical Documentation - Project Proposal Writing and CVs/ Resumes- Application letters- Notices- Agenda- Minutes Memos. Case Analysis. Organization Communication: Objectives - Channels of communication- Barriers in Communication- Non-verbal Cross-cultural communication- Meetings- Conferences- Press Conference and Press release. PRACTICALS: No University Examination Practice in Speech Making Process – Developing Communicative Ability – Techniques for speaking fluently-Using body language- Developing fluency and confidence. Short Speeches. Group Discussions and Role-plays. Listening Activities. Effective Presentation Strategies. Writing User Manuals of Electronic Equipment. REFERENCES: Rodney Huddleston and Geoffrey K Pullam A Student‘s Introduction to English Grammar Cambridge University Press U K 2005. Sankaranarayanan V Sureshkumar S and Palanisamy Technical English for Engineering Students PHI 2008 Bert Decker The Art of Communicating Decker Communications Inc USA 2004. Meenakshi Raman and Sangeeta Sharma Technical Communication: Principles and Practice Oxford University Press U K 2004. Paul V Anderson Technical Communication: A Reader – Centered Approach Asia Pvt. Ltd Singapore 2003. Internal Marks: 50 Marks is to be awarded for the continuous evaluation in the practical done in a language lab with the syllabus given above.one hour per week Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 56:

56 Ekeeda - Applied Electronics and Instrumentation Engineering 08.566 CMOS CIRCUITS DESIGN A L-T-P 2-1-0 Credits: 3 Module I Basic CMOS device physics CMOS I/V characteristics. CMOS processing CMOS device layout and design rules device capacitance. MOS amplifiers –CSCDCG and cascode amplifiers gain and frequency response. MOS Differential Amplifiers MOS load Current source Current mirror cascode load. Noise in CS CG CD and Differential amplifiers. Module II MOS Sample-and-Hold Circuits Current and Voltage reference Bandgap Voltage reference Propotional-to-absolute-temperature PTAT current generation and constant Gm biasing. Translinear gain cell Translinear multiplier. MOS Operational Amplifiers single stage- cascode and folded cascode CMOS op-amp. Advanced current mirrors – Wide swing current mirror wide swing constant transconductance bias circuit enhanced output impedance current mirror. Module III CMOS oscillators – ring oscillators LC oscillators CMOS VCO CMOS PLL non-ideal effects in PLL delay locked loops and application. CMOS data converters -Medium and High-speed CMOS data converters- Over sampling converters. CMOS comparators multipliers and wave shaping circuits. CMOS inverters – static and dynamic characteristics. Domino and NORA logic combinational and sequential circuits. Text Books: 1. David A. Johns Ken Martin : Analog Integrated Circuit Design Wiley India 2008. 2. Phillip E. Allen Douglas R. Holberg CMOS Analog Circuit DesignOxford University Press 2004. Reference: 1. Behzad Razavi: Design of Analog CMOS Integrated Circuits TMH 2002. 2. R Jacob Baker Harry W. Li David E Boyce: CMOS Circuit Design Lay out and Simulation - IEEE press 2002. 3. Paul R.Gray Paul J. Hurst etc.: Analysis and Design of Analog Integrated Circuits Wiley India 2008. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 marks for problems and design.

slide 57:

57 Ekeeda - Applied Electronics and Instrumentation Engineering 08.507 POWER ELECTRONICS LAB A L-T-P 0-0-4 Credits: 4 LIST OF EXPERIMENTS 1. Sine triangle PWM generation 2. Study of PWM IC TL 494 3. Power BJT and MOSFET drive circuits 4. Battery charger circuit 5. Buck DC-DC Converters 6. Step up DC-DC converter 7. Push pull DC- DC Converter 8. Application of opto-coupler IC MCT2E 9. AC phase control circuit 10. Linear ramp firing circuits 11. Simple SMPS 12. Half bridge and full bridge converters 13. Study of DC Drive 14. Regulation Characteristics of DC Drive 15. Basic Inverter Circuits Internal Marks: 50 1. Attendance - 10 2. Class work - 20 3. Practical internal Test - 20 Note: For University examination the following guidelines should be followed regarding award of marks a Circuit and design - 20 b Performance Wiring usage of equipments and trouble shooting - 15 c Result - 35 d Viva voce - 25 e Record - 05 Practical examination to be conducted covering entire syllabus given above. Students shall be allowed for the University examination only on submitting the duly certified record. The external examiner shall endorse the record.

slide 58:

58 Ekeeda - Applied Electronics and Instrumentation Engineering 08.508 ELECTRICAL MACHINES DRIVES LAB A 0-0-4 Credits: 4 1. No-load and Load Characteristics of DC Shunt and Compound Generator. 2. Load Characteristics of DC Series Motor. 3. Load Characteristics of DC Shunt and Compound Motor. 4. Transformation Ratio and load test on single phase transformer. 5. Open Circuit and Short Circuit Tests on 1-phase Transformer. 6. Load Test on 3-phase Induction Motor. 7. V/f control of 3 induction motor. 8. Load Test on 1-phase Induction Motor. 9. Load Test on 3-phase Alternator. 10. Electrical Braking of DC motor. 11. Speed control of DC Shunt motor. 12. Speed control of DC motor using Power Converters. 13. Study of speed control of stepper motor. Internal Marks: 50 1. Attendance - 10 2. Class work - 20 3. Practical internal Test - 20 Practical examination to be conducted covering entire syllabus given above. Students shall be allowed for the University examination only on submitting the duly certified record. The external examiner shall endorse the record.

slide 59:

59 Ekeeda - Applied Electronics and Instrumentation Engineering Syllabus VI Semester MICROCONTROLLER BASED SYSTEM DESIGN TA : 3-1-0 Credits: 4 Module I Introduction to microcontrollers general architecture of microcontrollers and microprocessors types of microcontrollers embedded processors. Overview of the 8051 family. 8051 architecture- memory organization registers and I/O ports. Addressing modes instruction sets and assembly language programming. Introduction to C programming in 8051 Watchdog timer Power down mode: idle/sleep mode. Module II Programming timer/counter. Interrupts- handling and programming. Serial communication using 8051- Interfacing with RS232. 8051 interfacing - keyboard stepper motor ADC DAC and LCD module interface. Applications - square wave and rectangular wave generation frequency counter and temperature measurement. PIC microcontrollers - introduction architecture block diagram explanation only and pin details of PIC 16F877 . Memory organization ports and timers in PIC 16F877. Module III Microcontroller RISC family-ARM processor fundamentals: Register Organisation pipeline core. ARM instruction sets: data processing branch load-store interrupts program status register instructions. Exceptions interrupts: handling priorities. Development Debugging tools for microcontroller based system design: software and hardware tools like cross assembler compiler debugger simulator in-circuit emulator and logic analyser Text Book: 1. Muhammad Ali Mazidi The 8051 microcontroller and Embedded System 2006 Pearson Education. 2. PIC 16F877 data book 3. Andrew N SlossDominic SymesChris Wright ARM Developer’s Guide Elsevier References 1. ARM processor Data book. 2. Kenneth Ayala The 8051 Microcontroller 3/e Thomson Publishing New Delhi. 3. David Seal ARM Architecture Reference Manual. 4. Wayne Wolf Computers as Components: Principles of Embedded Computing system design Else Vier2005. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Assembly language programs 8051 based and 25 design

slide 60:

60 Ekeeda - Applied Electronics and Instrumentation Engineering VLSI DESIGN TA L-T-P : 3-1-0 Credits: 4 Module I Material Preparation- Purification Crystal growth CZ and FZ process Slicing and Wafer processing Thermal Oxidation: Growth mechanisms Dry and Wet oxidation Deal Grove model. Diffusion- Fick’s Laws Pre deposition and drive in processes diffusion system. Ion implantation- Range Theory channeling annealing. Epitaxy-VPE and MBE CVD and MBE systems. Deposition - Dielectric and poly silicon film deposition. Isolation- PN junction isolation and dielectric isolation. Multilevel Interconnects and Metallization. Lithography- Photo lithographic sequence Electron Beam Lithography X-ray Lithography. CMOS IC Fabrication Sequence- n well p well and twin tub process. SOI -Fully depleted and partially depleted SOI devices. Fabrication Sequence. Resistors and capacitors Fabrication. Module II VLSI Design Flow- Design specifications Behavioral level RTL logic Design and Physical Level Design Basic concepts only. Review of MOS transistor theory- Saturation and Linear regions of Operation of NMOS and PMOS. Review of Short channel and secondary effects of MOSFET. MOSFET Capacitances- Oxide related capacitances Junction Capacitances. MOSFET Scaling -Constant field Constant voltage and generalized scaling. Stick diagram and Lay out - Design rules λ and µ rules. CMOS inverter - DC characteristics Noise margin Static load inverters pseudo NMOS Saturated load inverters. Propagation delay Static and Dynamic Power dissipation. CMOS logic design - Static logic and Dynamic logic Domino logic np- CMOS Pass transistor logic Transmission gates. Module III CMOS system design- Adders Static adder Dynamic adder Carry bypass adder Linear Carry select adder Square root carry select adder Carry look ahead adder Register based multipliers Array multipliers. Memory elements- Timing matrix of Sequential circuits Static and Dynamic Memory Latches and Registers Multiplexer based latches SRAM DRAM ROM. Sense amplifiers – Differential Single ended. Reliability and testing of VLSI circuits – General concept CMOS testing Test generation methods. Introduction to VLSI design tools. Introduction to PLDs-PLA Design folding of PLAs and familiarization of FPGAs. Text Books: 1. M.S.Tyagi: Introduction to Semiconductor Materials Wiley India 2. Jan M Rabaey: Digital Integrated Circuits PHI 2008 3. John P Uyemura: Introduction to VLSI Circuits and Systems Wiley India 2008 References: Neil H E Weste Kamram Eshrahian: Principles of CMOS VLSI Design2/e Pearson Education. Yuan Taur Tak Hning: Fundamentals of Modern VLSI Devices Cambridge Uni. Press 2000. S K Gandhi: VLSI Fabrication Principles 2/e Prentice Hall. Wayne Wolf: Modern VLSI Design Systems on Chip 3/e Pearson Education. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 problems

slide 61:

61 Ekeeda - Applied Electronics and Instrumentation Engineering OPTICAL INSTRUMENTATION A 2-1-0 Credits: 3 Module I Optical fibers and their properties - principles of light propagation through a fiberdifferent types of fibers and their properties transmission characteristics of optical fiber absorption losses scattering losses dispersion optical sources and detectors – LED-PIN and APD. Optical fiber sensors - Intensity modulated optical fiber sensors Reflective Evanescent wave and microbend fiber optic sensors Fiber optic refractometers thermometersdistributed sensing with fiber optic sensorsinterferometric optical fiber sensorsmoiré fringes measurement of -current pressure temperatureliquid levelstraincurrent and voltage using optical fiber sensors. Module II Laser fundamentals - fundamental characteristics of Lasers three level and four level lasers properties of laser laser modes resonator configuration Q-switching and mode locking cavity dumping types of lasers - gas solid liquid and semi conductor lasers. Industrial application of Lasers - Laser for measurement of - distance length velocity acceleration current voltage and atmospheric effect. Laser for material processing – laser heating welding melting and trimming of materials removal and vaporization. Module III Medical applications of lasers - laser and tissue interaction Laser instruments for - surgery removal of tumors of vocal cords brain surgery plastic surgery gynecology and oncology. Holography Interferometry - principles of Holography Gabor’s hologram Leith’s and Upatneik’s techniques in holography point holograms fourier transform holograms acoustic holography holographic interferometry and applications Applications of holography in non-destructive testing and instrumentation. Text books: 1. Senior J M. Optical Fiber Communication- Principles and Practice Prentice Hall 1993. 2. John and Harry Industrial lasers and their applications McGraw Hill 1974. References: 1. John F Read Industrial Applications of Lasers Academic Press 1997. 2. Gerd KeiserOptical Fiber Communication McGraw Hill2000. 3. Jasprit Singh Semiconductor Optoelectronics McGraw Hill1995. 4. B P Pal Fundamentals of Fiber Optics in Telecommunication Sensor SystemsWiley Eastern1991. 5. Govind P Agarwal Optical Communications John Wiley 2000. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 40 Problem and derivation

slide 62:

62 Ekeeda - Applied Electronics and Instrumentation Engineering BIOMEDICAL INSTRUMENTATION A L-T-P 2-1-0 Credits: 3 Module I Electro physiology - Review of physiology and anatomy resting potential action potential bioelectric potentials cardiovascular dynamics electrode theory bipolar and unipolar electrodes surface electrodes physiological transducers. Systems approach to biological systems. Bioelectric potential and cardiovascular measurements - EMG - Evoked potential response EEG foetal monitor. ECG phonocardiography vector cardiograph BP blood flow cardiac output plethysmography impedance cardiology cardiac arrhythmia’s pace makers defibrillators. Module II Respirator and pulmonary measurements and rehabilitation - Physiology of respiratory system respiratory rate measurement artificial respirator oximeter hearing aids functional neuromuscular simulation physiotheraphy diathermy nerve stimulator artificial kidney machine. Patient monitoring systems - Intensive cardiac care bedside and central monitoring systems patient monitoring through bio-telemetry implanted transmitters telemetering multiple information. Sources of electrical hazards and safety techniques. Module III Recent trends- Medical imaging X-rays laser applications ultrasound scanner echo cardiography CT Scan MRI/NMR cine angiogram colour doppler systems Holter monitoring endoscopy. Bioinformatics – Introduction protein information resources genome information resources DNA sequence analysis Pairwise alignment techniques. Text Book: 1. Leslie Cromwell Fred J. Weibell and Erich A. Pfeiffer Biomedical Instrumentation and Measurements 2/e PHI. 2. Joseph J Carr John M Brown Introduction to Biomedical Equipment Technology 4/e Pearson Education. 3. T. K. Attuwood D J Pary Smith Introduction to Bioinformatics Pearson Education2006. References: 1. Geddes L. A. and Baker L. E. “Principles of Applied Biomedical Instrumentation” 3/e John Wiley. 2. Khandpur R. S “Handbook of Biomedical Instrumentation” 2/e.TMH. 3. B.D.Ratner and Hoffman Biomaterials Science-An Introduction to Materials in Medicine 2/eElsevier. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 63:

63 Ekeeda - Applied Electronics and Instrumentation Engineering COMMUNICATION ENGINEERING A L-T-P 3-1-0 Credits: 4 Module I Analog Communication Systems- Principles of Amplitude modulation double and single side band suppressed carrier principle and system AM modulation and demodulation circuits AM Transmitters Radio receivers Angle modulation Frequency modulation and demodulation methods FM stereo broadcasting.Comparission of AM and FM. Transmission lines – Types equivalent circuit losses standing waves impedance matching bandwidth. Radio wave propagation – Free space Ground wave Ionospheric and Line of sight propagation. Module II Digital Transmission - Pulse modulation techniques - PAM PWM and PPM concepts PCM encoder and decoderCompandingDMADMDifferential PCMSignal power in binary signals. Multiplexing - Time division multiplexingT1 digital carrier systems. Frequency division multiplexing –AT T’s FDM hierarchy.Wavelength division multiplexing. Data Communication Techniques - Data transmission using analog carriers FSK PSK DPSK QPSK and QAMCarrier and Clock recoveryDPSK error and bit error rate performance. Satellite communication –Kepler’s laws OrbitsGeosynchronus and Geostationary satellitesAntenna look anglesSatellite link models and equationsLink budget. Module III Virtual circuits and data grams- routing traffic control - X.25. Computer Communication Architecture and protocols - OSI model - TCP/IP protocol - System network architecture. Principles of internetworking - Bridges - Routing with bridges - Connectionless internetworking - Connection oriented internetworking. ISDN - Transmission structure - User access - ISDN protocols -Broad band ISDN. Text Books: Module I Roy Blake Electronic Communication Systems 2/e Thomson Delmar. Module-II Wayne Tomasi Advanced Electronic Communications Systems6/ePearson Education. Module-III William stallings Data and Computer Communication4/ePHI/Pearson Education. References: 1. Kennedy Electronic Communication Systems 4/e TMH. 2. Larry Haghes Introduction to Data CommunicationA practical approach Jones and Bartiett1997. 3. Leon W.CouchII Digital and Analog Communication Systems6/ePearson Education. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Problem derivation and Proof

slide 64:

64 Ekeeda - Applied Electronics and Instrumentation Engineering SPEECH PROCESSING TA : 2-1-0 Credits: 3 Module I Speech production and perception. Time frequency representation of speech - spectrogram speech features from spectrogram. Classification of Speech Sounds - Vowels Consonants Diphthongs nasal consonants fricatives Voice and unvoiced speech. Pitch and pitch detection. STFT analysis of speech Sinusoidal model of speech Homomorphic filtering. Module II Linear Prediction Modeling of speech - Source filter model Covariance Method Autocorrelation method Levinson Durbin Algorithm LPC based speech coder: LSF representation Quantization of LSF coefficients. Introduction to multi-pulse LPC and Code excited linear prediction. Module III Speech Recognition - Speech recognition model Distortion Measures for speech recognition : Log spectral Distance Cepstral Distance and likelihood distance. Time alignment Normalization : Dynamic Time Warping. HMM based speech recognizer - Definition of HMM Formulation of speech recognition process using HMM. References: 1. Thomas F. Quatieri: Discrete Time Speech Signal Processing: Principles and Practice Pearson Education Asia. 2. L R Rabiner R W Schafer : Digital Processing of Speech Signals Prentice Hall Signal Processing Series 1978. 3. J R Deller Jr et al: Discrete-Time Processing of Speech Signals IEEE Press 2000. 4. Ben Gold Nelson Morgan: Speech and Audio Signal Processing. 5. Douglas O’Shaughnessy Speech Communication : Human and Machine Universities Press 2000. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 problems derivations and proof Assignment for Sessional marks shall be problems based on MATLAB / any other software packages covering the syllabus above.

slide 65:

65 Ekeeda - Applied Electronics and Instrumentation Engineering 08.616 ADAPTIVE SIGNAL PROCESSING TA L-T-P : 2-1-0 Credits: 3 Module I Linear optimum filtering and adaptive filtering linear filter structures adaptive equalization noise cancellation and beam forming. LMS algorithm and its applications learning characteristics and convergence behavior misadjustment Normalized LMS and affine projection adaptive filters Frequency domain block LMS algorithm. Module II Optimum linear combiner and Wiener-Hopf equations orthogonality principle minimum mean square error and error performance surface Steepest – descent algorithm and its stability. Least squares estimation problem and normal equations projection operator exponentially weighted RLS algorithm convergence properties of RLSalgorithm Kalman filter as the basis for RLS filter Square-root adaptive filtering and QR- RLS algorithm Systolic-array implementation of QR – RLS algorithm. Module III Forward and backward linear prediction - Levinson-Durbin algorithm Lattice predictors gradient- adaptive lattice filtering least-squares lattice predictor QR-decomposition based least-squares lattice filters. Adaptive coding of speech. Adaptive equalization of wireless channels. Antenna array processing. Text Books: 1. Haykin S. Adaptive Filter Theory Pearson Education. 2002. 2. Widrow B.Stearns S.D.Adaptive Signal Processing Pearson Education 3. ManolakisD.GIngle V.K.KogonM.SStatistical and Adaptive Signal Processing Artech House2005. Reference: 1. Sayed Ali H. Fundamentals of Adaptive Filtering John Wiley Sons. 2003 2. Diniz P.S.R. Adaptive Filtering: Algorithms and Practical Implementation Kluwer.1997 3. Sayeed Ali H. Adaptive Filters Wiley-IEEE Press. 2008. 4. Scharf L.L. Statistical Signal Processing: Detection Estimation and Time Series Analysis Addison- Wesley.1991. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem derivation and Proof

slide 66:

66 Ekeeda - Applied Electronics and Instrumentation Engineering 08.626 DIGITAL IMAGE PROCESSING TA : 2-1-0 Credits: 3 Module I Digital Image Fundamentals: Two dimensional systems and Mathematical preliminaries-Elements of Digital Image Processing System - Structure of the human eye - Image formation and contrast sensitivity – Gray scale and Color Images-Sampling and Quantization - Neighbours of pixel – Distance measures – Image processing applications. Image Transforms: Introduction to Fourier transform - Discrete Fourier transform - Properties of two dimensional FT – Separability Translation Periodicity Rotation Average Value – DFTFFTDCT DST Walsh Hadamard KL transforms and their properties. Module II Image Enhancement: Point Operations - Spatial domain methods - Frequency domain methods - Histogram Equalization technique - Neighbourhood averaging Median filtering - Low pass filtering Averaging of multiple Images - Image sharpening by differentiation - High pass filtering. Homomorphic filtering. Image Restoration: Degradation model for continuous functions - Discrete formulation - Diagonalization of circulant and Block-circulant matrices - Effects of Diagonalization - Unconstrained and constrained Restorations - Inverse Filtering - Wiener Filter - Constrained least - square Restoration. Module III Image Compression: Coding and Interpixel redundancies - Fidelity criteria - Image Compressions models - Elements of Information theory - Variable length coding - Bit plane coding - Lossless Predictive coding - Lossy predictive coding - Transform coding techniques. Image Segmentation and Representation: The detection of discontinuities - Point Line and Edge detections - Gradient operators - combined detection - Thresholding - Representation schemes: chain codes - Polygon approximation - Boundary descriptors: Simple descriptors - Shape numbers Fourier descriptors - Introduction to recognition and Interpretation. Mathematical morphology - binary morphology dilation erosion opening and closing duality relations gray scale morphology. Text books: Rafael C Gonzalez and Richard E.woods “Digital Image Processing”3/eAddition – Wesley. Anil K Jain “Fundamentals of Digital Image Processing” PHI New Delhi 1995 S JayaramanS EsakkirajanT Veerakumar”Digital Image Processing”TMH2009 References: 1. Kenneth R Castleman “Digital Image Processing” PHI 1995. 2. William K Pratt “Digital Image Processing” Wiley India 2/e. 3. Sid Ahmed M A “Image Processing Theory Algorithm and Architectures” McGraw-Hill1995. 4. Rafael C Gonzalez and Richard E.woods “Digital Image Processing Using MATLAB” Addition - Wesley 2004. 5. R.M. Haralick and L.G. Shapiro Computer and Robot Vision Vol-1 Addison - Wesley1992. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problems derivations and proofs

slide 67:

67 Ekeeda - Applied Electronics and Instrumentation Engineering 08.636 WAVELETS APPLICATIONS TA L-T-P : 2-1-0 Credits: 3 Module I Fourier and Sampling Theory - Generalized Fourier theory Fourier transform Short-timewindowed Fourier transform Time-frequency analysis Fundamental notions of the theory of sampling. Theory of Frames - Bases Resolution of unity Definition of frames Geometrical considerations and the general notion of a frame Frame projector Example – windowed Fourier frames. Wavelets - The basic functions Specifications Admissibility conditions Continuous wavelet transform CWT Discrete wavelet transform DWT. Module II The multiresolution analysis MRA of L2R - The MRA axioms Construction of an MRA from scaling functions - The dilation equation and the wavelet equation Compactly supported orthonormal wavelet bases - Necessary and sufficient conditions for orthonormality. Wavelet transform - Wavelet decomposition and reconstruction of functions in L2R. Fast wavelet transform algorithms - Relation to filter banks Wavelet packets. Module III Wavelet Transform Applications: Image processing - Compression Denoising Edge detection and Object detection. Audio - Perceptual coding of digital audio. Wavelet applications in Channel coding. References : 1.P. P. Vaidyanathan: Multirate Systems Filter Banks PTR PH 1993 2.Gilbert Strang : Linear Algebra and its Applications. 3. Reghuveer M Rao Ajit S Bopardikar: Wavelet Transforms – Introduction to Theory and Applications Pearson Education Asia 1998. 4. Strang G S T Q Nguyen: Wavelets and Filter Banks Wellesley – Cambridge Press 1996. 5.Burrus C S R A Gopinath and H. Gao: Introduction to Wavelets and Wavelet Transforms: A Primer Prentice Hall 1998. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 problems derivations and proof Assignment for Sessional marks shall be problems based on MATLAB / any other software packages covering the syllabus above.

slide 68:

68 Ekeeda - Applied Electronics and Instrumentation Engineering 08.646 DIGITAL SIGNAL PROCESSORS TA L-T-P : 2-1-0 Credits: 3 Module I Introduction to programmable digital signal processors: Multiplier and multiplier accumulator Bus structure multiple access memories VLIW architecture enhancing computational throughput - parallelism and pipelining special addressing modes on chip peripherals. Architecture of TMS320C5x: Bus structure CALU ARAU registers parallel logic unit program controllers flags on chip memory and peripherals. Module II Assembly language instructions: Assembly language syntax addressing modes load/store instructions add subtract multiply NORM and program control instructions. Instruction pipelining in C5x: pipeline structure pipeline operation program for familiarization of arithmetic instructions programs for processing real time signals. Systolic architecture introduction-systolic array design- FIR systolic arrays- selection of scheduling vector- matrix multiplication and 2D systolic array design- systolic design for space representations containing delays. Module III Fast Convolution- cook toom algorithm and winogard algorithm. iterated convolution cyclic convolution. Computer arithmetic- Signed Digit NumbersSD - Multiplier Adder Graph - Logarithmic and Residue Number SystemLNS RNS - Index Multiplier -Architecture for Pipelined Adder Modulo Adder Distributed ArithmeticDA CORDIC Algorithm and Architecture. Square rooting-: digit recurrence algorithm. References: 1. B.Venkataraman and M.Bhaskar Digital signal Processors Architecture programming and Applications TMH New-Delhi. 2. Keshab K. Parhi VLSI Digital signal processing Systems: Design and Implementation John Wiley Sons 1999. 3. Digital Signal processing with FPGAs U Mayer Baese 2e Springer 4. Synthesis of Arithmetic Circuit: FPGA ASIC and Embedded Systems Jean Pierre Deschamps etc Wiley InterScience 2006. 5. Texas Instruments TMSC5x Users Manuals. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Problems and algorithms

slide 69:

69 Ekeeda - Applied Electronics and Instrumentation Engineering 08.656 OPTIMIZATION TECHNIQUES TA L-T-P : 2-1-0 Credits: 3 Module I Unconstrained optimization - Necessary and sufficient conditions for local minima One dimensional search methods Gradient methods - Steepest descent Inverse Hessian Newton’s method Conjugate direction method Conjugate gradient algorithm Quasi Newton methods. Module II Linear Programming : - Convex polyhedra Standard form of linear programming Basic solutions Simplex algorithm Matrix form of the simplex algorithm Duality Non simplex methods : Khachiyan method Karmarkar’s method. Module III Nonlinear Constrained Optimization: - Equality constraints – Lagrange multipliers Inequality constraints – Kuhn-Tucker conditions Convex optimization Geometric programming Projected gradient methods Penalty methods. Genetic Algorithms - basicsdesign issuesconvergence rateGenetic Algorithm methods. Text Books: EDWIN K. P. CHONG STANISLAW H. ZAK An Introduction to Optimization2/e John Wiley Sons. Stephen Boyd Lieven Vandenberghe Convex Optimization CUP 2004. R. Fletcher Practical methods of Optimization 2/eWiley 2003. References: Belegundu Optimization Concepts and Applications in Engineering Pearson Education 2005. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problems derivations and proofs

slide 70:

70 Ekeeda - Applied Electronics and Instrumentation Engineering 08.666 ELECTROMAGNETICS A L-T-P : 2-1-0 Credits: 3 Module I Review of vector geometry – Spherical and cylindrical co ordinate systems- Maxwells equations TEM modes in a linear homogenous isotropic medium polarization Pointing vector and power flow TEM waves incident on a boundary - Snells laws wave propagation inside a conductor - skin depth weakly dispersive TEM modes - phase and group velocity. Module II Multi-conductor Transmission Lines - Time-domain analysis of transmission linesBounce diagrams Frequency-domain analysis of transmission lines Standing waves Smith chart Transmission line matching Single stub matching quarter-wave transformers. Waveguides - Electromagnetic fields in parallel-plate rectangular waveguides TE and TM modes wave impedance wave velocities attenuation in waveguides. Module III Electromagnetic radiation retarded potentials power density beam solid angle radiation intensity radiation resistance radiation pattern radiation efficiency gain directivity effective aperture and effective length of the antennas. Electric field magnetic field radiation resistance and directivity of short dipole and half wave dipole. Folded dipole Yagi Uda Parabolic dish antenna. Antenna arrays – broadside and end-fire array. Wave Propagation – Ground wave Sky wave and Space wave propagation. Text Book: 1. Ramo S. Whinnery J.R. and van Duzer T Fields and Waves in Communication Electronics 3/e Wiley Eastern. 2. Nannapaneni Narayana Rao: Elements of Engineering Electromagnetics5/e Pearson Education. 3. Jordan E.C. and Balmain K.G. Electromagnetic Waves and Radiating Systems 2/e PHI. Reference: 1. Sadiku M.N.O. Elements of Electromagnetics 3/e Oxford University Press. 2. R.E. Collin Foundations for Microwave Engineering 2/e McGraw-Hill 1993. 3. Hayt W.H. and Buck J.A. Engineering Electromagnetics 7/e Tata McGraw-Hill.2006 4. John D. Kraus Electromagnetics4/e Mc Graw Hill. 5. David K. Cheng Field and Wave Electromagnetics 2/ePearson Education. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problems derivations and proofs

slide 71:

71 Ekeeda - Applied Electronics and Instrumentation Engineering 08.607 MICROCONTROLLER LAB TA L-T- : 0-0-4 Credits: 4 Programming experiments using 8051 Trainer Kit. Addition and Subtraction of 16 bit numbers. Multiplication and division of 8 bit numbers. Sorting Factorial of a number. Multiplication by shift and add method. LCM and HCF of two 8 bit numbers Matrix addition Square Square root Fibonacci series. B. Interfacing experiments 1. DAC interface. 2. Stepper motor interface. 3. Display interface. 4. Realization of Boolean expression using port. 5. Frequency measurement by counting the number of pulses in a fixed amount of time. 6. Frequency measurement by measuring the time period between two consecutive pulses. 7. Waveform generation using lookup tables. 8. PWM generation. 9. Interfacing with 8-bit ADC. Note: For University examination the following guidelines should be followed regarding award of marks: Questions for each batch should be selected equally from part A and B a Circuit and design - 20 b ImplementationUsage of Kits and trouble shooting - 15 c Result - 35 d Viva voce - 25 e Record - 05 Practical examination to be conducted covering entire syllabus given above. Students shall be allowed for the University examination only on submitting the duly certified record. The external examiner shall endorse the record.

slide 72:

72 Ekeeda - Applied Electronics and Instrumentation Engineering 08.608 ELECTRONIC PRODUCT DESIGN MINI PROJECT TA L-T-P : 1-0-3 Credits: 4 This course includes both theory and practical works I. THEORY Theory classes are to be conducted 1 hour/week based on the following syllabus: DESIGN Theory only Definition of a product Product Classification New Product development process. Product design methodology Product planning data collection. Creativity techniques. Elements of aesthetics. Ergonomics. Control panel organization. Electronic systems and needs. Physical integration of circuits packages boards and full electronic systems. Introduction to reliability Reliability considerations in electronic products Effect of reliability on product design and pricing. EMI and RFI studies. Restriction of Hazardous Substances RoHS compliance. Text Books: Kevin Otto and Kristin Wood “Product Design” Pearson Education 2003. Flurschiem CH: Industrial Design and Engg. Design Council London and Springer Verlag 1983 Web based Current literature IEEE Press 1999. Ernest J Mccormick: Human Factors in Engg. And Design McGraw Hill Co. Ed. II. PRACTICAL A COMPUTER AIDED PCB DESIGN ASSEMBLING One hour per week is allotted for Computer Aided PCB Design Assembling. Following Circuits are to be used for the above purpose Minimum one circuit from each category should be done Discrete component circuits. Timer ICs based circuits. Op-Amp ICs based circuits. Digital ICs based circuits. Microcontroller based circuits. Combination of the above. B MINIPROJECT For Miniproject 2 hours/week is allotted. Each student should conceive design develop and realize an electronic product. The basic elements of product design - the function ergonomics and aesthetics - should be considered while conceiving and designing the product. The electronic part of the product should be an application of the analog digital systems covered up to the 6 th semester. The realization of the product should include design and fabrication of PCB. The student should submit a soft bound report at the end of the semester. The product should be demonstrated at the time of examination. Internal Evaluation Marks Total internal marks is 50. An end semester written examination is to be conducted based on the Theory part Design with two hour duration for 25 Marks. Remaining 25 marks is to be awarded for the Mini project after evaluation at the end of the semester.

slide 73:

73 Ekeeda - Applied Electronics and Instrumentation Engineering University Examination Marks Total external marks are 100. Practical examination will be conducted for Computer Aided PCB Design 1 1/2 hour PCB Assembling 1 1/2 hour. The miniproject will also be evaluated during the practical examination. One of the following custom made PCB may be used for the University examination. Water Level Controller. Water Level Indicator. Musical Burglar Alarm. Light Dimmer. Heat Sensor. FM Transmitter. Dancing Light. Audio Level Indicator. Clap Switch/Sound Operated Switch. Touch Sensitive Switch. Audio Power Amplifier. Regulated Power Supply Rectifier-Filter-Regulator Count Down Timer. Digital Clock. Musical Door Bell. Note: For University examination the following guidelines should be followed regarding award of marks a PCB Design any given circuit using CAD software - 20 b PCB assembling of the given circuit on a single sided given PCB - 10 c Result/working of the assembled circuit - 15 d Evaluation of the finished Mini project done by the student - 20 e Viva voce Based only on the Mini Project done by the student - 25 f Record Report - 5+5 Students shall be allowed for the University examination only on submitting the duly certified record and the mini project report Soft bounded. The external examiner shall endorse them.

slide 74:

74 Ekeeda - Applied Electronics and Instrumentation Engineering Syllabus VII Semester 08.701 INDUSTRIAL MANAGEMENT TA L-T-P : 2-1-0 Credits: 3 Module I Evolution of Scientific Management and industrial Engineering. Functions of Management- Brief description of each function . System concept. Types of organization structures - Types of companies and their formation. Personal Management – Objectives and functions – Recruitment Selection Training and Induction concepts and Techniques. Cost concept - Break even analysis simple problems. Depreciation - Methods of calculating depreciation. Introduction to reliability. Reliability of electronic components Module II Facilities Planning- Factors to be considered in site selection plant layout- types of layout layout planning- systematic layout planning computerized planning techniques. Introduction to Material Handling Principles equipments and their selection Work study – methods study and Time measurement Steps in method improvement – use of charts and diagrams. Performance rating and Methods- Types of allowances computation of basic time and standard time. Wages and incentives -system of wage incentive plans. Job evaluation and Merit rating. Module III Fatigue and methods of eliminating fatigue- industrial relations - Industrial disputes- collective bargaining – Trade unions- workers participation in management in Indian context. Labour welfare and social security- Industrial safety – Methods and Techniques. Production Planning and Control - functions and Objectives- job batch mass and continuous production – Inventory control- Determination of EOQ-selective inventory control techniques. Quality Engineering :– Quality Control- Quality Vs Cost concept Control chart for variables and attributes- Introduction to Six Sigma- Introduction to ISO Total Quality Management Quality information system Bench marking and Quality circles Introduction to Marketing and its Environment- different concepts- marketing mix-Product Life Cycle. References: 1 M.A.ShahafManagement Accounting Principles Practices Vikas publications Pvt. 2. Grant and levenworth Statistical Quality Control TMH. 3. Krafewsk Operations Management Pearson Education 6 th Edn. 4. Introduction to Work Study- ILO 5. Besterfield Total Quality management Peaarson Education 6. Richard L. Francis John .A. White Facility Layout Location Prentice Hall 7. KotlerMarketing Management Pearson Education 8. Roger G. Schroedu Operations Management McGraw Hill 9. Monappa Industrial Relations TMH 10. Stephen P Robbins David A. Deceyo Fundamentals of Management Pearson Education University Examination Question Paper consists of two parts. Part A-10 compulsory short answer questions for 4 marks each covering the entire syllabus 10 x 440. Part B-2 questions of 20 marks each from each module and student has to answer one from each module 3 x 2060 Note: 08.701 shall be handled by faculty of Mechanical Dept.

slide 75:

75 Ekeeda - Applied Electronics and Instrumentation Engineering 08.702 ROBOTICS INDUSTRIAL AUTOMATION A L-T-P : 3-1-0 Credits: 4 Module I Introduction - Basic concepts definition and origin of robotics different types of robots robot classification applications robot specifications. Introduction to automation - Components and subsystems basic building block of automation manipulator arms wrists and end-effectors. Transmission elements: Hydraulic pneumatic and electric drives. Gears sensors materials user interface machine vision implications for robot design controllers. Module II Kinematics dynamics and control - Object location three dimensional transformation matrices inverse transformation kinematics and path planning Jacobian work envelope manipulator dynamics dynamic stabilization position control and force control present industrial robot control schemes. Robot programming - Robot programming languages and systems levels of programming robots problems peculiar to robot programming control of industrial robots using PLCs. Module III Automation and robots - Case studies multiple robots machine interface robots in manufacturing and non-manufacturing applications robot cell design selection of a robot. Factory automation - Flexible Manufacturing Systems concept – Automatic feeding lines ASRS transfer lines automatic inspection – Computer Integrated Manufacture – CNC intelligent automation Industrial networking bus standards. Text Books: 1. Spong and Vidyasagar Robot Dynamics and Control John Wiley Sons 1990. 2. Asfahl C.R Robots and Manufacturing Automation John Wiley Sons 1992. 3. Mikell P GrooverAutomation Production Systems and Computer Integrated Manufacturing 3/ePHI. Reference: 1. Klafter R.D. Chmielewski T.A Negin M.Robotic Engineering An Integrated Approach PHI2007 2. Schilling R. J. Fundamental of Robotics: Analysis and ControlPHI2007. 3. Fu K.SGonzalezR.CLee C.S.G.Robotics Control Sensing Vision and Intelligence McGraw- Hill1987. 4. Bolton W Mechatronics 3/ePearson Education. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Problem derivation and Proof

slide 76:

76 Ekeeda - Applied Electronics and Instrumentation Engineering 08.703 DISCRETE - TIME CONTROL SYSTEMS A L-T-P : 3-1-0 Credits: 4 Module I Introduction to Digital control system. Z plane analysis of discrete control systems – Impulse sampling and data hold - pulse transfer function - Realization of digital controllers. Design of discrete time control systems by conventional methods - Mapping between the S plane and the Z plane. Stability analysis in the Z plane. Transient and steady state response analysis. Design based on the root locus and frequency response methods. Module II State space analysis – State space representations – Solving discrete time state space equations – pulse transfer function matrix – Discretization of continuous time state space equations – Liapunov stability analysis. Pole placement and observer design – Introduction – controllability – observability – Transformations in state space analysis and design – design via pole placement – state observers – servo systems. Module III Polynomial equation approach to control systems design - Introduction – Diophantine equation – Design – Design of model matching control systems. Optimal control – Introduction – Discrete Euler – Lagrange equation – Time optimum control with energy constraint - Design of optimal linear digital regulator – Principle of optimality and dynamic programming – Solution of the discrete Riccati equation – Sampling period sensitivity. Quadratic optimal control systems – Introduction – Steady state quadratic optimal control. Text Books: 1. Ogata K. Discrete-time Control Systems 2/e Pearson Education. 2. Kuo B. C Digital Control Systems 2/e Oxford University press. References: 1. Phillips C. L. and Nagle H. T Digital Control System Analysis and Design 3/ePrentice-Hall. 2. Astrom K. J and Wittenmark Computer Controlled Systems Theory and Design2/e PHI. 3. Gopal M. Digital Control and State Variable Methods Tata McGraw Hill 2006. 4. Charles L. Phillips H. Troy Nagle Digital Control System Analysis and Design ISA Press1995. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem derivation and Proof

slide 77:

77 Ekeeda - Applied Electronics and Instrumentation Engineering 08.704 PROCESS DYNAMICS AND CONTROL A L-T-P : 3-1-0 Credits: 4 Module I Process Control System: Terms and objectives piping and Instrumentation diagram instrument terms and symbols. Regulator and servo control classification of variables. Process characteristics: Process equation degrees of freedom modeling of simple systems – thermal gas liquid systems. Process lag load disturbance and their effect on processes. Self-regulating processes interacting and non- interacting processes. Controller modes: Basic control action two position multiposition floating control modes. Continuous controller modes: proportional integral derivative. Composite controller modes: P-I P-D P-I-D Integral wind-up and prevention. Module II Controller Modes: Auto/Manual transfer Bumpless transfer. Response of controllers for different test inputs. Selection of control modes for processes like level pressure temperature and flow. Controller tuning Methods: Evaluation criteria - IAE ISE ITAE. Process reaction curve method continuous oscillation method damped oscillation method. Auto tuning. Closed loop response of I II order systems with and without valve measuring element dynamics. Advanced control system: Cascade control ratio control feed forward control. Over-ride split range and selective control. Multivariable process control interaction of control loops. Module III Final control elements: Pneumatic control valves construction details types various plug characteristics. Valve sizing. Selection of control valves. Inherent and installed valve characteristics. Cavitation and flashing in control valves. Valve actuators and positioners. Instrument air supply specifications. Case Studies: Steam boiler – drum level control and combustion. Distillation column – Modelling – Dynamics – Control of top and bottom product compositions – Reflux ratio. Control of chemical reactor – Control of heat exchangers. Text Books: 1. George Stephenopoulos: Chemical Process Control 2/ePHI. 2. D E Seborg etal : Process Dynamics Control Wiley 1986. 3. Peter Harriot : Process ControlTMH1985. 4. D R Conghanowr: Process Systems Analysis and Control2/e McGraw Hill. References: 1. Carlos A Smith etal : Principles Practice of Automatic Process Control 2/eJohn Wiley Sons. 2. 1. B. Wayne Bequette: Process Control – Modeling Design and Simulation PHI2006. 3. Shinskey: Process Control Systems 4/e McGraw Hill. 4. Paul W.Murril: Fundamentals of Process Control Theory 3/e ISA press New York. 5 W Luyben : Process Modeling Simulation and Control for chemical Engineers 2/e McGraw Hill. 6. Patranabis D: Principles of Process Control TMH 1981. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem derivation and Proof

slide 78:

78 Ekeeda - Applied Electronics and Instrumentation Engineering 08.705 REAL TIME OPERATING SYSTEMS TA L-T-P : 2-1-0 Credits: 3 Module I Introduction to Operating system-:Kernel Process- states and transition- manipulation of process and address space creation and termination signals process scheduling. memory management Interrupts: interrupt sources and handlers- saving and restoring the content disabling interrupt the shared data problem- shared data bug- atomic and critical section- interrupt latency. Structure of real time systems: task classes time systems and classes performance measures. Module II RTOS: tasks threads and process- reentrancy- reentrancy rules- RTOS semaphores-semaphore initialization-semaphore reentrancy multiple semaphore RTOS services: message queue- mailboxes and pipes - time function -events -memory management - interrupt routine in RTOS. Design using RTOs: design principles- short interrupt routines- RTOS tasks- tasks for priority- tasks for encapsulation - creating and destroying of tasks. Scheduling- Rate monitoring Scheduling- Deadline monitoring scheduling. Aperiodic Task Scheduling: Non-preemptive methods EDD LDF Preemptive methods EDF EDF. Periodic Task Scheduling: Static priority assignments RM DM Dynamic priority assignments EDF EDF Module III Real time kernels- issues in real time kernel-Structure of a real-time kernel-Process states -Data structures-Kernel primitives -Inter-task communication mechanisms -System overhead. Case study of Kernel design threads and task scheduling RTOS: QNX Nutrino2 and MicroC/OS-II real time operating systems. Text Books: 1. Abraham Silberschatz "Operating System Concepts" John wiley Pub 7e 2. Giorgio C. Buttazzo "HARD REAL-TIME COMPUTING SYSTEMS Predictable Scheduling Algorithms and Applications" Kluwer Academic Publishers. 3. Jean J Labrosse "MicroC/OS-II The Real-Time Kernel" 1998 CMP Books. Reference: 1. Robert Krten "Getting started with QNX Neutrino" 1999 Parse Software Devices. 2. Krishna CM Kang Singh G "Real time systems" Tata McGrawHill 2003. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 79:

79 Ekeeda - Applied Electronics and Instrumentation Engineering 08.715 CRYPTOGRAPHY TA L-T-P: 2-1-0 Credits: 3 Module I Introduction to cryptology- stream and block ciphers- secret and public key cryptography. Mathematical Proof Methods: direct indirect by cases contrapositive contradiction induction existence. Introduction to Complexity of Algorithm- P NP NP-Complete classes. Number theory- primes divisibility liner diaphantine equations congruences system of linear congruences Wilson theorem Fermat’s little theorem Eulers theorem. Multiplicative functions Primitive roots Quadratic congruences- quadratic residues Legrende symbol. Review of algebraic structures -groups rings finite fields polynomial rings over finite field. Module II Affine cipher Hill cipher Enciphering matrices. Public key cryptography- One way functions- RSA - Discrete Log- Deffie-Helman Key Exchange system Digital signature standards. Knapsack Crypto system - Zero-knowledge protocols. Module III Primality testing- pseudo primes- the rho method. Elliptic curves and elliptic curve cryptosystems. Data Encryption standardDES Advanced Encryption standard AES. Cryptanalysis methods- linear differential higher order differential quadratic. Factoring Algorithms- Trial Division Dixons Algorithm Quadratic Sieve. Reference: 1. Neal Koblitz: A Course in Number Theory and Cryptography 2/e Springer. 2. Thomas Koshy: Elementary Number Theory with Applications Elsevier India 2e. 3. Menezes A et.al.: Handbook of Applied Cryptography CRC Press 1996. Reading: 1. MR Schroeder: Number Theory in Science and Communication 4/e Springer. 2. Niven Zuckerman: An Introduction to Theory of Numbers Wiley InterScience. 3. Mark Stamp Richard M Low: Applied Cryptanalysis- Breaking Ciphers in the Real World Wiley InterScience. 4. Mao: Modern Cryptography Pearson Education. 5. Victor Shoup: A Computational Introduction to Number Theory and Algebra Cambridge University Press. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem derivation algorithms and Proof

slide 80:

80 Ekeeda - Applied Electronics and Instrumentation Engineering 08.725 PATTERN RECOGNITION TA L-T-P : 2-1-0 Credits: 3 Module I Basics of pattern recognition. Bayesian decision theory- Classifiers Discriminant functions Decision surfaces Normal density and discriminant functions Discrete features. Parameter estimation methods - Maximum-Likelihood estimation Gaussian mixture models Expectation-maximization method Bayesian estimation. Module II Hidden Markov models for sequential pattern classification - Discrete hidden Markov models Continuous density hidden Markov models. Dimension reduction methods Fisher discriminant analysis Principal component analysis. Non-parametric techniques for density estimation - Parzen-window method K-Nearest Neighbour method. Module III Linear discriminant function based classifiers – Perceptron Support vector machines. Non-metric methods for pattern classification - Non-numeric data or nominal data Decision trees Cluster validation. Unsupervised learning and clustering - Criterion functions for clustering Algorithms for clustering: K-means Hierarchical and other methods. Text Books: 1. R.O.Duda P.E.Hart and D.G.Stork Pattern Classification John Wiley 2001 2. S.Theodoridis and K.Koutroumbas Pattern Recognition 4/e Academic Press 2009 3. C.M.Bishop Pattern Recognition and Machine Learning Springer 2006 References: 1. K. R. Castleman Digital Image Processing Prentice Hall of India 1996. 2. W.Chou B.H. Juang Eds.Pattern Recognition in Speech and Language Processing CRC Press 2003. 3. J.I.Tou R.C.Gonzalez Pattern Recognition Priciples Addition –Wesley. 4. R.Schalkoff Pattern Recognition –Statistical Structural and Neural Approaches John Wiley 1992. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem derivation Proof and algorithms

slide 81:

81 Ekeeda - Applied Electronics and Instrumentation Engineering 08.735 OPTOELECTRONIC DEVICES TA : 2-1-0 Credits: 3 Module I Optical processes in semiconductors EHP formation and recombination absorption and radiation in semiconductor deep level transitions Auger recombination luminescence and time resolved photoluminescence optical properties of photonic band-gap materials. Measurement of optical properties Junction photodiode: PIN heterojunction and avalanche photodiode. Comparisons of various photo detectors High speed measurements. Beam optics-Gaussian beam properties beam quality. Transmission through optical components Module II Photovoltaic effect V-I characteristics and spectral response of solar cells heterojunction and cascaded solar cells Schottky barrier and thin film solar cells design of solar cell. Modulated barrier MS and MSM photodiodes Wavelength selective detection coherent detection Micro cavity photodiode. Electroluminescent process choice of light emitting diode LED material device configuration and efficiency LED: Principle of operation LED structure frequency response defects and reliability. Principle of Optoelectronic modulators electro optic modulatoracousto-optic modulators. Application area Module III LASER – Emission and absorption of radiation in a two-level system Einstein’s Relations and Population Inversion Gain in a two-level Lasing medium Lasing condition and gain in a semiconductor Selective Amplification and Coherence Line-shape function and line-broadening mechanism Lasing threshold condition in a two level system Axial and Transverse Laser modes. Junction Laser - Operating principle threshold current heterojunction lasers DFB laser Cleaved Coupled Cavity laser Quantum Well lasers Surface emitting lasers Rare-earth doped lasers Alternate Pumping techniques. Mode Locking of semiconductor lasers Tunneling Based lasers FP lasers References 1. Pallab Bhattacharya: Semiconductor Optoelctronic devices 2/e PHI. 2John.M.Senior: Optical Fiber Communications – Principles and Practice 2/e PHI. 3.S.C Gupta: Optoelectronic Devices and Systems PHI2008 4.Khare Fiber optics and OptoelectronicsOxford University press2006 5.Saleh and Teich Fundamentals Of PhotonicsWiley interscience2007 6.Simmon and Potter Optical materials Elsevier2006 Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 problems derivations and proof

slide 82:

82 Ekeeda - Applied Electronics and Instrumentation Engineering 08.745 COMPUTER VISION TA L-T-P : 2-1-0 Credits: 3 Module I Introduction- The Marr paradigm and scene reconstruction Other paradigms for image analysis. Image Formation- Monocular imaging system Orthographic Perspective Projection Camera model and Camera calibration Binocular imaging systems Image Digitization. Binary Image Analysis and Segmentation- Properties Digital geometry Segmentation. Module II Image Processing for Feature Detection and Image Synthesis- Image representations in continuous and discrete form Edge detection corner detection Line and curve detection SIFT operator Image- based modeling and rendering Mosaics snakes Fourier and wavelet descriptors Multiresolution analysis. Shape from X - Shape from shading Photometric stereo Texture Occluding contour detection. Module III Motion Analysis- Regularization theory Optical computation Stereo Vision Motion estimation Structure from motion. Object Recognition- Hough transforms and other simple object recognition methods Shape correspondence and shape matching Principal component analysis Shape priors for recognition. Text Book: David. A. Forsyth and J. Ponce Computer Vision: A Modern Approach Prentice Hall 2003. References: 1. B. K. P. Horn Robot Vision MIT Press 1986. 2. Linda Shapiro and George Stockman Computer Vision Prentice Hall 2001 3. R. Jain R. Kasturi and B. Schunk Machine Vision McGraw Hill 1995 4. E. Trucco and A. Verri Introductory Techniques for 3D Computer Vision Prentice Hall. 5. Adrian Low Introductory Computer Vision Imaging Techniques and Solutions2/eBSPIndia. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem derivation and Proof

slide 83:

83 Ekeeda - Applied Electronics and Instrumentation Engineering 08.755 BIOMEDICAL IMAGING TECHNIQUES A L-T-P : 2-1-0 Credits: 3 Module I Historical Pespective Generic Principles-Modality Contrast SNR Resolution Toxicity. Mathematical fundamentals- 2D Fourier Transform Hankel Transform Radon Transform k-space. Physics of Projection Radiography. Computerized Tomography-Principles of sectional imaging - Scanner configuration - Data acquisition system - Image formation principles - Conversion of x-ray data in to scan image - 2D image reconstruction techniques - Iteration and Fourier methods-Types of CT scanners-Applications. Module II Nuclear Medicine – Radio nuclides- Emission Computed Tomography- PET – SPECT imaging - Gamma Camera. Ultra Sound Imaging – Echo equation – Transducers-Capture and display - Principles of A-mode B-mode and M-mode display – Beam forming- Pulsed Doppler and phased array systems - Applications of diagnostic ultra sound. Module III Magnetic Resonance Imaging - Physics of MRI - Pulse sequence- Image acquisition and reconstruction techniques- MRI instrumentation- Magnets-Gradient system- RF coils - Receiver system-Functional MRI -MRI Angiography- Applications of MRI. Text books: 1. Albert Macovski Medical Imaging Systems Prentice Hall1983. 2. S Webb The Physics of Medical Imaging CRC press1988. 3. A C Kak Principle of Computed Tomography IEEE Press New York. References : 1. Joseph Hornak The Basics of MRI online at http://www.cis.rit.edu/htbooks/mri 2. G A Hay Medical Image Formation Perception and Measurement Wiley International1976. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Problem derivation and Proof

slide 84:

84 Ekeeda - Applied Electronics and Instrumentation Engineering 08.706 MIXED SIGNAL CIRCUIT DESIGN TA L-T-P : 2-1-0 Credits: 3 Module I Analog and digital MOSFET models. CMOS inverter – DC characteristics – switching characteristics Static logic gates- NAND and NOR gates- DC and Switching characteristics-pass transistor and transmission gate logic. Module II Differential Amplifiers-CMRR-Cascode differential amplifier- Two stage CMOS Op- Amps- Frequency compensation of opamps-miller compensation. Two stage open loop comparator- propagation delay High speed comparators- Analog multiplier. Module III Dynamic analog circuits – charge injection and capacitive feed through in MOS switch – sample and hold circuits- Design of Switched capacitor circuits – First order switched capacitor circuits capacitor filters- Design of PLL Sense amplifiers DAC ADC – High speed ADC Over sampling ADC Text Book: Baker Li Boyce CMOS: Circuits Design Layout and Simulation Prentice Hall India 2000 Phillip E. Allen Douglas R. Holbery CMOS Analog Circuit Design Oxford 2004 Reference: Razavi B. Design of Analog CMOS Integrated Circuits Mc G Hill 2001. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 75 Design Analysis and Problems

slide 85:

85 Ekeeda - Applied Electronics and Instrumentation Engineering 08.716 EMBEDDED SYSTEMS TA L-T-P : 2-1-0 Credits: 3 Module I Introduction to Embedded Systems Definition and Classification – Overview of Processors and hardware units in an embedded system – Software embedded into the system – Exemplary Embedded Systems – Embedded Systems on a Chip SoC and the use of VLSI designed circuits I/O Devices - Device I/O Types and Examples – Synchronous - Iso-synchronous and Asynchronous Communications from Serial Devices - Examples of Internal Serial-Communication Devices - UART and HDLC - Parallel Port Devices - Sophisticated interfacing features in Devices/Ports- Timer and Counting Devices - ‘12C’ ‘USB’ ‘CAN’ and advanced I/O Serial high speed buses- ISA PCI PCI-X. Module II Programming concepts of Embedded programming in C Program Elements Macros and functions - Use of Pointers - NULL Pointers - Use of Function Calls – Multiple function calls in a Cyclic Order in the Main Function Pointers – Function Queues and Interrupt Service Routines Queues Pointers – Concepts of embedded programming in C++ – Cross compiler – Optimization of memory codes. Real time operating systems Definitions of process tasks and threads – Clear cut distinction between functions – ISRs and tasks by their characteristics – Operating System Services- Goals – Structures- Kernel - Process Management – Memory Management – Device Management – File System Organisation and Implementation Module III I/O Subsystems – Interrupt Routines Handling in RTOS RTOS Task scheduling models - Handling of task scheduling and latency and deadlines as performance metrics – Co-operative Round Robin Scheduling – Cyclic Scheduling with Time Slicing Rate Monotonics Co-operative Scheduling – Preemptive Scheduling Model strategy by a Scheduler - Inter Process Communication and Synchronisation – Shared data problem – Use of Semaphores – Priority Inversion Problem and Deadlock Situations – Inter Process Communications using Signals – Semaphore Flag or mutex as Resource key – Message Queues – Mailboxes – Pipes – Virtual Logical Sockets – Remote Procedure Calls RPCs. Study of Micro C/OS-II or Vx Works or Any other popular RTOS – RTOS System Level Functions – Task Service Functions – Time Delay Functions – Memory Allocation Related Functions – Semaphore Related Functions . REFERENCES 1. Rajkamal Embedded Systems Architecture Programming and Design TATA McGraw-Hill First reprint Oct. 2003 2. Steve Heath Embedded Systems Design Second Edition-2003 Newnes 3. David E.Simon An Embedded Software Primer Pearson Education Asia First Indian Reprint 2000. 4.Wayne Wolf Computers as Components: Principles of Embedded Computing System Design – Harcourt India Morgan Kaufman Publishers First Indian Reprint 2001 5.Frank Vahid and Tony Givargis Embedded Systems Design – A unified Hardware / Software Introduction John Wiley 2002. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 86:

86 Ekeeda - Applied Electronics and Instrumentation Engineering 08.726 INTELLECTUAL PROPERTY RIGHTS TA L-T-P : 2-1-0 Credits: 3 Module I Intellectual property rights-Introduction importance need of IPR forms of IPR-Trade mark Patent Copyright Design Semiconductor IC layout design geographical indication of goods. Trademarks-Introduction condition and procedure for registration rights and limitations of registration infringement of trade mark remedies against infringement offences and penalties. Module II Patents- Meaning and purpose of patent advantage of patent to inventor invention not patentable application for patent provision for secrecy of certain inventions grant of Patent rights of patent holder infringement of patent offences and penalties international arrangements. Copyrights- introduction meaning of copyrights ownership rights of owner subject matter of copyrights international copyrights infringement offences and penalties. Industrial design- Introduction registration of design copyrights in registered design Industrial and international exhibitions. Module III Semiconductor IC layout design- Introduction condition and procedure for registration Effects of registration offences and penalties. IT related IPR-Computer software and IPR database and protection domain name protection. International treaties- Introduction TRIPS PCT WIPO EPO WTO introduction to dispute settlement procedure Indian position in global IPR structure. References 1.N.K.Acharya Text book on Intellectual property rights Asia Law HouseHyderabad 2 Ganguli Intellectual property rights TMHDelhi 3 Bare acts of iThe Trade marks act1999 ii The patents acts 1970 iiiThe copyright act 1957 iv Design act 2000vThe semiconductor IC layout design act 2000 Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 87:

87 Ekeeda - Applied Electronics and Instrumentation Engineering 08.736 MEMS TA L-T-P : 2-1-0 Credits: 3 Module I MEMS and Microsystems – Applications – Multidisciplinary nature of MEMS – principles and examples of Micro sensors and micro actuators – micro accelerometer - meters Micro grippers – micro motors - micro valves – micro pumps – Shape Memory Alloys. Scaling laws in miniaturization - scaling in geometry scaling in rigid body dynamics the trimmer force scaling vector scaling in electrostatic and electromagnetic forces scaling in electricity and fluidic dynamics scaling in heat conducting and heat convection. Module II Micro System fabrication – photo lithography – Ion implantation- Diffusion – Oxidation – Chemical vapour deposition – Etching- Overview of Micro manufacturing – Bulk micro manufacturing – Surface micro machining – LIGA process – Materials for MEMS – silicon – silicon compounds – silicon piezo resistors – GaAs – polymers. Module III Microsystem Design - Design considerations – Selection of signal transduction – Process design – Design of a silicon die for a micro pressure sensor – Microsystem packaging - three levels of micro system packaging – interfaces in micro system packaging – Signal mapping and transduction – RF MEMS and optical MEMS components. Text book: 1. Tai-Ran Hsu MEMS and Microsystems Design and Manufacture TMH 2002. References: 1. Mark Madou “Fundamentals of Micro fabrication” CRC Press New York 1997. 2. Julian W Gardner “Microsensors: Principles and Applications” John Wiley Sons 1994 3. Sze S M “Semiconductor Sensors” McGraw-Hill New Delhi 1994. 4. Chang C Y and Sze S M “VLSI Technology” McGraw-Hill New York 2000. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 88:

88 Ekeeda - Applied Electronics and Instrumentation Engineering 08.746 LOW POWER VLSI DESIGN TA L-T-P : 2-1-0 Credits: 3 Module I Introduction- Need for low power VLSI chips Sources of power dissipation Dynamic power dissipation Charging and discharging of capacitance Short circuit current in CMOS circuits CMOS leakage current Static current. Power analysis - Gate-Level Architecture level and Data correlation analysis. Monte Carlo Simulation. Probabilistic power analysis. Low voltage CMOS VLSI technology - BiCMOS and SOI CMOS technology. Module II Power reduction at the circuit level -Transistor and gate sizing Equivalent pin ordering Network restructuring and reorganization Special latches and Flip Flops Low power digital cell library Adjustable device threshold voltage-Low voltage circuits-voltage scaling-sub threshold operation of MOSFETs. Power reduction at the logic level - Gate reorganization Signal gating Logic encoding State machine encoding Precomputation logic. Module III Power reduction at the architecture and system level - Power and performance management Switching activity reduction Parallel architecture with voltage reduction Flow graph transformation. Low power SRAM architectures. Software design for low power architecture. Recent trends in low- power design for mobile and embedded application. Text books: Gary K Yeap Practical Low Power Digital VLSI Design Kluwer academic publishers1998. Kaushik Roy Sharat Prasad Low-Power CMOS VLSI design John Wiley Sons 2000. References: Anantha P Chandrakasan Robert W BrodersenLow Power Digital CMOS Design Kluwer Academic Publications1995. Kuo J B and Lou J H “Low Voltage CMOS VLSI Circuits” John Wiley Sons1999. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 40 Problem derivation and Proof

slide 89:

89 Ekeeda - Applied Electronics and Instrumentation Engineering 08.756 MECHATRONICS A L-T-P : 2-1-0 Credits: 3 Module I Introduction to mechatronics - mechatronics in manufacturing - mechatronics in products - scope of mechatronics - fundamentals of numerical control - advantages of NC systems - classification of NC systems - point to point and contouring systems - NC and CNC - incremental and absolute s ystems - open loop and closed loop systems - features of NC machine tools - fundamentals of machining - design consideration of NC machine tools - methods of improving machine accuracy and productivity - special tool holders. Module II System devices - system drives - hydraulic systems - DC motors - stepping motors - AC motors - feedback devices - encoders - pulse digitizers - resolvers - inductosyn - tachometers - counting devices - flip flops - counters - decoders - digital to analog converters - interpolation - linear interpolator - circular interpolators Complete interpolator-Control Loops for CNC-CNC software interpolator - flow of data in NC machines. Module III Computer Integrated Manufacturing CIM Introduction-Automated Storage and Retrieval Systems - Group Technology-Computer Aided Process Planning-Material Requirement Planning-Computer Aided Inspection- Machine Vision NC part programming - manual programming - concepts - tape formats - tab sequential - fixed block word address and variable block formats - part programming examples - point to point programming and simple contour programming - computer aided programming - concepts - post processor programming languages - APT programming - part programming examples. Reference: 1. Yoram Koren Computer Control of Manufacturing Systems McGraw Hill1983. 2. HMT Mechatronics TMH.2000. 3. Michel P. Groover Industrial Robots -Technology Programming and Applications McGraw Hill 4. M.P.Groover and Emory WZimmers CAD/CAM:Computer Aided Design and Manufacturing Prentice Hall1984. 5. Yoram Koren Ben Yuri Numerical Control of Machine Tools Khanna Publishers.1984. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Problems derivations and proofs Module IV This Module is only for internal evaluation – 25 Marks as assignment for the subject Computer Aided Design CAD Design Process-Application of Computers for Design- Benefits of CAD AutoCAD file menu edit menu draw menu modify menu-format menu- tools menu- AutoCAD Dimensioning- 3D representations in CAD- View menu - 3D drawing Entities- Rendering in Auto CAD- solid and surface modelling comparisons with 2D methods spline curve and surface representations parametric methods and data exchange.

slide 90:

90 Ekeeda - Applied Electronics and Instrumentation Engineering 08.707 BIOMEDICAL SIGNAL PROCESSING LAB A L-T-P : 0-0-3 Credits: 3 PART A: 1. Measurement of pH conductivity and turbidity. 2. PC based respiratory analyser. 3. PC based ECG pulse analyser. 4. Audio tone analyser. 5. Blood pressure calibrator. Experiments on Digital Signal Processors. 6. Sine wave generation Display on CRO 7. Real Time FIR Filter implementation Low-pass High-pass and Band-pass 8. Real Time IIR Filter Implementation Low-pass High-pass and Band-pass 9. Real time DFT of sine wave Display on CRO 10. Sampling a given Analog signal and study of aliasing. PART B: Experiments on MATLAB or LABWIEW 1. Convolution : Linear Convolution Circular Convolution Linear Convolution using Circular Convolution. 2. Random Sequence Generation: Uniform Rayleigh and Normal Distributions 3. Discrete Fourier Transform: Unfolding the spectrum Frequency Unwrapping 4. Linear convolution using DFT Overlap-add and Overlap-Save methods. 5. Design implementation of IIR filters. Butterworth and Chebyshev Filters 6. Design implementation of FIR filters. Window method and Frequency sampling Method 7. Optimal Equiripple Design of FIR filters. 8. Generation of AM FM PWM waveforms. 9. Study of Sampling rate conversion by a rational factor 10. Study of Coefficient Quantization effects on the frequency response of digital filter. Internal Marks: 50 1. Attendance - 10 2. Class work - 20 3. Practical internal test - 20 Note: For University examination the following guidelines should be followed regarding award of marks: Questions for each batch should be selected equally from part A and B a Circuit and design - 20 Logical design and flow diagram for software Expts. b ImplementationWiring usage of equipments and trouble shooting - 15 Coding for Software Expts. c Result - 35 Including debugging of Program for Software Expts. d Viva voce - 25 e Record - 05 Practical examination to be conducted covering entire syllabus given above. Students shall be allowed for the University examination only on submitting the duly certified record. The external examiner shall endorse the record.

slide 91:

91 Ekeeda - Applied Electronics and Instrumentation Engineering 08.708 CONTROL SYSTEM LAB A L-T-P : 0-0-3 Credits: 3 PART -A 1. Frequency response characteristics of a second order system 2. Time response characterics of a second order system 3. Root locus analysis Design. 4. Design of compensation networks Lead Lag and Lag –level 5. Design of state feedback 6. Observer design 7. Implementation of digital PID in a PC using c language and ADC/DAC 8. Data acquisition using LabVIEW 9. PID controller using LabVIEW PART-B Experiments based on MATLAB/LABVIEW 1. Microprocessor based servo system. 2. Speed control system Open loop closed loop 3. Real time control of inverted pendulum 4. Real time control of gyroscope. 5. Ball beam system 6. Position control system with velocity feedback 7. Analog PID controller. Internal Marks: 50 1. Attendance - 10 2. Class work - 20 For Part A only 3. Practical internal Test - 20 For Part B only Note: For University examination the following guidelines should be followed regarding award of marks a Circuit and design - 20 b Performance Wiring usage of equipments and trouble shooting - 15 c Result - 35 d Viva voce Including Part-B also - 25 e Record - 05 Practical examination university to be conducted covering entire syllabus given above in part-A. Students shall be allowed for the University examination only on submitting the duly certified record Including Part-A and Part-B. The external examiner shall endorse the record.

slide 92:

92 Ekeeda - Applied Electronics and Instrumentation Engineering 08.709 SEMINAR TA L-T-P : 0-0-1 Credits: 1 Internal Evaluation 50 Marks The student is expected to present a seminar in one of the current topics in Electronics Communication Electronic Instrumentation and related areas based on current publications. The student will undertake a detailed study on the chosen subject and submit a seminar report in a soft bound form at the end of the semester. This report shall be submitted for evaluation for the viva-voce in 8 th semester. The report shall be endorsed by the Guide Seminar coordinator and the Professor/HOD. Evaluation of presentation will be conducted by a committee of the Seminar coordinator Guide and a Senior faculty. Internal Marks shall be awarded as follows: 1. Evaluation of Presentation : 30 marks 2. Evaluation of Report : 20 marks

slide 93:

93 Ekeeda - Applied Electronics and Instrumentation Engineering 08.710 PROJECT DESIGN TA L-T-P : 0-1-0 Credits: 1 Internal Evaluation 50 Marks The student is expected to select a project in one of the current topics in Electronics Communication Electronic Instrumentation and related areas based on current publications. He/She shall complete the design of the project work and submit the design phase report. This shall be in soft bound form. This report shall be submitted for evaluation in 7 th semester as well as for the viva-voce in 8 th semester. The report shall be endorsed by the Guide Project co-ordinator and the Professor/HOD. Evaluation of report and viva will be conducted by a committee consisting of the Project co- ordinator Guide and a Senior faculty. The number of students in a project batch shall be limited to a maximum of four. The project shall be done in the Institute where the student is doing the course Internal Marks shall be awarded as follows: Evaluation of the report : 25 marks Viva : 25 marks

slide 94:

94 Ekeeda - Applied Electronics and Instrumentation Engineering Syllabus VIII Semester NANOELECTRONICS TA L-T-P : 2-1-0 Credits: 3 Module I Introduction to nanotechnology and nanoelectronics Impacts Limitations of conventional microelectronics. Introduction to methods of fabrication of nanonaterials-different approaches. fabrication of nano-layers -Physical Vapor Deposition Chemical Vapor Deposition Epitaxy Molecular Beam Epitaxy Ion Implantation Formation of Silicon Dioxide. Fabrication of nanoparticle- grinding with iron balls laser ablation reduction methods sol gel self assembly precipitation of quantum dots. Introduction to characterization tools of nano materials- -principle of operation of STM AFM SEM TEM XRD PL UV instruments. Module II Mesoscopic Physics and Nanotechnologies - trends in Microelectronics and Optoelectronics characteristic lengths in mesoscopic systems Quantum mechanical coherence Quantum wells wires and dots Density of states and dimensionality The physics of low dimensional structures - basic properties of two dimensional semiconductor nanostructures square quantum wells of finite depth parabolic and triangular quantum wells quantum wires and quantum dots Semiconductor quantum nanostructures and super lattices – MOSFET structures Heterojunctions Quantum wells modulation doped quantum wells multiple quantum wells The concept of super lattices Kronig - Penney model of super lattice. Transport of charge in Nanostructures under Electric field - parallel transport perpendicular transport quantum transport in nanostructures Transport of charge in magnetic field and quantum Hall effect - Effect of magnetic field on a crystal the Aharonov-Bohm effect the Shubnikov-de Hass effect the quantum Hall effect. Module III Nanoelectonic devices and systems - MODFETS heterojunction bipolar transistors resonant tunnel effect RTD RTThot electron transistors Coulomb blockade effect and single electron transistor CNT transistors heterostructure semiconductor laser quantum well laser quantum dot LED quantum dot laser vertical cavity surface emitting laser quantum well optical modulator quantum well sub band photo detectors Infrared detectornanoswitchesprinciple of NEMS. Text Books J.M. Martinez-DuartR.J. Martin PalmaF. Agulle Rueda Nanotechnology for Microelectronics and optoelectronics Elsevier2006. W.R. Fahrner Nanotechnology and Nanoelctronics Springer 2005 References K. Goser P. Glosekotter J. Dienstuhl Nanoelectronics and nanosystems Springer 2004. 2. Supriyo Dutta Quantum Transport- Atom to transistor Cambridge University Press 2005. T. Pradeep Nano the Essentials TMH 2007. Poole Introduction to Nanotechnology John Wiley 2006 ChattopadhyayBanerjee Introduction to Nanoscience TechnologyPHI 2009 Diwanand and BharadwajNanoelectronicsPentagon Press Delhi 2006 Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Problems

slide 95:

95 Ekeeda - Applied Electronics and Instrumentation Engineering NON-LINEAR CONTROL THEORY A L-T-P : 3-1-0 Credits: 4 Module I Introduction -Features of linear and non-linear systems –State variable representation – Solution of state equations – Conversion of state variable models to transfer functions – Eigen values – Eigen vectors – Concepts of controllability and observability - Common physical non-linearities – Methods of linearising nonlinear systems. Phase plane analysis - Concept of phase portraits – Singular points – Limit cycles – Construction of phase portraits – Phase plane analysis of linear and non-linear systems – Isocline method. Module II Function analysis -Basic concepts derivation of describing functions for common non-linearities – Describing function analysis of non-linear systems – Conditions for stability – Stability of oscillations. Stability analysis - Introduction – Liapunov’s stability concept – Liapunov’s direct method – Lure’s transformation – Aizerman’s and Kalman’s conjecture – Popov’s criterion – Circle criterion. Module III Adaptive and Feedback Linearization - Matching and triangular conditions Robust stabilization self tuning regulator adaptive feedback Linearization extension to multi input systems physical examples. Controller synthesis -Linear design and non-linear verification – Non-linear internal model control – Parameter optimization – Model predictive controller – Optimal controller – State feedback and observer. Text books: 1. E. Jean-Jacques Slot line Applied Non-linear Control Pearson Education1991. 2. Torkel Glad Lennart Ljung Control Theory – Multi Variable and Non-linear Methods Taylor’s Francis Group 2002. REFERENCE 1. Peter A. Cook Non-linear Dynamical Systems 3/ePearson Education. 2. I.J. Nagrath M. Gopal Control System Engineering New Age International Publishers 2003. 3. Ronald R. Mohler Non-linear Systems Vol. – I Dynamics Control Pearson Education 1998. 4.Hassan K. Kahalil Non-linear Systems Pearson Education 2002. 5. R. Marino and P. Tomei Nonlinear control design - Geometric Adaptive and Robust Prentice Hall1995. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem derivation and Proof

slide 96:

96 Ekeeda - Applied Electronics and Instrumentation Engineering SMART SENSORS NETWORKS A L-T-P : 2-1-0 Credits: 3 Module I Review: Sensor actuator and transducer- Classification of sensors on the basis of energy source and type of output signals. Signal conditioning. Meaning and types of smart sensors. MEMS Sensors: Concept and methods of making MEMS devices Sensors and Actuators Examples. Smart Sensor Technologies: Thick-film thin-film and monolithic IC technologies and their use in making smart sensors. Bulk and surface micromachining technologies Wafer bonding LIGA process Plasma etching and their use in making smart sensors. Module II Intelligent and Network Sensors: Concept and architecture of intelligent sensors Concept and architecture of network sensors. Sensor Networking: 7-Layer OSI model of communication system device-level networks introduction to protocols and technologies for wired and wireless LANs. Ethernet RS-485 and Foundation Fieldbus protocols. Wi-Fi. Zigbee and Bluetooth protocols. Concept of adhoc networks. Smart Transducer Interface Standard IEEE 1451. Module III Introduction to Sensor network computing: Applications Constraints/Challenges Wireless and wired networking issues for sensor nets. Networking for sensor nets- Directed diffusion Aggregation Network discovery/initialization Location/Time service Routing Large-scale analysis Power-aware computing and Communication. Text Books: 1. Fraden J. Handbook of Modern Sensors: Physics Design and Applications AIP press 2003. 2. Feng Z. and Leonidas G. Wireless Sensor Networks Elsevier Eastern Limited 2007. 3. Anna Hac Wireless Sensor Network Design John Wiley Sons Ltd 2004. References: 1. Frank R. Understanding Smart Sensors Artech House publishers. 2000. 2. Yamasaki H. Intelligent Sensors Elsevier Eastern Limited. 1996. 3. Ramon P. A. and Webster J. G. Sensors and Signal Conditioning2/e John Wiley and Sons. 4. Elena Gaura Robert Newman Smart MEMS and Sensor systems Imperial College Press 2006. 5. Mohammad IlyasSensor Network Applications Architecture and Design CRC Publishers 2006. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered.

slide 97:

97 Ekeeda - Applied Electronics and Instrumentation Engineering INDUSTRIAL INSTRUMENTATION A L-T-P : 3-1-0 Credits: 4 Module I Measurement of force torque velocity Electric balance – different types of load cells – magnets – elastics load cell-strain gauge load cell-different methods of torque measurement strain gauge relative regular twist-speed measurement-revaluation counter- capacitive tacho-drag up type tacho and A.C tacho generators – stroboscope. Measurement of acceleration vibration and density Accelerometers – LVDT piezo- electric strain gauge and variable reluctance type accelerometers – mechanical type vibration instruments – seismic instrument as an accelerometer and vibrometer – calibration of vibration pick ups – units of density specific gravity and viscosity used in industries – Baume scale API scale – pressure head type densitometer – float type densitometer – ultrasonic densitometer- bridge type gas densitometer. Module II Pressure Measurement: Units of pressure – manometers – different types – elastic type pressure gauges – Bourde type bellows – diaphragms – Electrical methods – elastic elements with LVDT and strain gauges – capacitive type pressure gauge – piezo resistive pressure sensor – resonator pressure sensor – measurement of vacuum – McLeod gauge – thermal conductivity gauges – Ionization gauge cold cathode and hot cathode types – testing and calibration of pressure gauges – dead weight tester. Temperature measurement: Definitions and standards – primary and secondary fixed points – calibration of thermometers different types of filled in system thermometer – sources of errors in filled in systems and their compensation – Bimetallic thermometers – Electrical methods of temperature measurement – Industrial RTDs and their characteristics –3 lead and 4 lead RTDs. Module III Measurement of viscosity humidity and moisture: Viscosity terms – say bolt viscometer – rotameter type viscometer – industrial consistency meters – humidity terms – dry and wet bulb psychrometers – hot wire electrode type hygrometer – dew cell – electrolysis type hygrometer – commercial type dew point meter – moisture terms – different methods of moisture measurement – moisture measurement in granular materials solid penetrable materials like wood web type material. Principle and constructional details of electromagnetic flow meter – different types of excitation – schemes used – different types of ultrasonic flow meters – laser doppler anemometer systems – rortex shedding flow meter – target flow meter – solid flow rate measurement – guidelines for selection of flow meter. Text books: 1. Ernest O.Doebelin Measurement systems Application and Design 4/e McGraw Hill. 2. D.Patranabis Principles of Industrial Instrumentation2/e TMH. References: 1. A.K.Sawhney A course in Electrical and Electronic Measurement and Instrumentation – Dhanpat Raj Sons2004. 2. B.C.Nakra and K.K.Chaudary Instrumentation Measurement and AnalysisTMH1985. 3. Willard Merritt Dean and Settle Instrumental Methods of Analysis 7/e CBS PublishersIndia. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Problem derivation and Proof

slide 98:

98 Ekeeda - Applied Electronics and Instrumentation Engineering DISTRIBUTED CONTROL SYSTEMS A L-T-P : 2-1-0 Credits: 3 Module I Review of computers in process control: Data loggers Data Acquisition Systems DAS Direct Digital Control DDC. Supervisory Control and Data Acquisition Systems SCADA sampling considerations. Functional block diagram of computer control systems. Programmable logic controller PLC basics: Definition overview of PLC systems input/output modules power supplies and isolators. General PLC programming procedures programming on-off inputs/ outputs. Auxiliary commands and functions PLC Basic Functions register basics timer functions counter functions. PLC functions: Arithmetic functions comparison functions Skip and MCR functions data move systems. PLC Advanced intermediate functions: Utilizing digital bits sequencer functions matrix functions.. Module II PLC Advanced functions: Alternate programming languages analog PLC operation networking of PLC PLC-PID functions PLC installation troubleshooting and maintenance. Design of interlocks and alarms using PLC. DCS- Basic Packages Introduction analog control direct digital control distributed process control DCS configuration with associated accessories control console equipment control unit Relay Rack mounted equipments local control unitsattributes of DCS DCS Flow sheet symbols. DCS System Integration I/O hardware stations Set-point station control Supervisory Computer Tasks configurations system integration with PLCs and computers. Module III Instrumentation Standard Protocols: HART Protocol frame structure programming implementation examples Benefits Introduction Advantages and Limitations of Fieldbus FDS configuration Comparison with other fieldbus standards including Device net Profibus Controlnet CAN Industrial Ethernet MAP and TOP. Industrial applications of PLC SCADA DCS and open systems for following plants: Cement plant Thermal power plant Steel Plant Glass manufacturing plant Paper and Pulp plant. Text Books: 1. Popovic and BhatkarDistributed computer control for Industrial Automation Mareeet Dekkar N.York. 2. Krishna KantComputer based Industrial Control Prentice Hall New Delhi. 3. Lukcas M.PDistributed Control Systems Van Nostrand Reinhold Co. New York. 4. Curtis D. Johnson Process Control Instrumentation Technology7/ePHI. References: 1. John.W.Webb Ronald A Reis Programmable Logic Controllers - Principles and Applications4/e Prentice Hall Inc. 2. Frank D. PetruzellaProgrammable Logic Controllers Second edition McGraw Hill New York. 3. Deshpande P.B and Ash R.HElements of Process Control Applications ISA Press New York. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problems derivations and proofs

slide 99:

99 Ekeeda - Applied Electronics and Instrumentation Engineering 08.815 ADAPTIVE CONTROL SYSTEMS A : 2-1-0 Credits: 3 Module I Different adaptive control strategies - Gain scheduling MRAS STR stochastic adaptive control - Lp spaces - Norms - stability of Dynamic system. Differential equations stability definitions - Lyapunov stability Theory - Exponential stability theorems – estimating parameters in dynamic systems with least square methods . Module II MRAS – adaptation law – adaptation law based on stability criterion – adaptation based on MIT rule – Design of MRAS based on MIT rule – Design of MRAS based on Lyapunov methods – simulation of MRAS systems. Module III Self Tuning Regulators – Pole placement design – Indirect STR – continuous time STR –Direct STR- simulation of STR systems - stochastic self tuning regulators- linear quadrant STR – adaptive predictive control . Reference: 1. Shankar Sastry Mare Bodson Adaptive Control IEEE press 2. K.J Astrom B.Wittenmark Adaptive Control Pearson Education2000. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problems derivations and proofs

slide 100:

100 Ekeeda - Applied Electronics and Instrumentation Engineering 08.825 ROBUST CONTROL A L-T-P : 2-1-0 Credits: 3 Module I Introduction - Some common robust control problems. Linear system tools - Jordan and Real Jordan canonical forms structural decomposition. Structural mapping of Bilinear Transformations - Mapping of continuous time to discrete time and vice a versa existence condition of H∞ - sub optimal controllers continuous time system and discrete time system. Module II Solution to Discrete time Riccati Equations - Solutions to general DARE and H∞-DARE. Information in continuous time and discrete time H ∞ - .optimization - Full information feedback case output feedback case plants with imaginary axis zeros/unit circle zeros. Module III Solutions to continuous time and discrete time H ∞problems - Full state feedback full order output feedback reduced order output feedback. Robust and perfect tracking of continuous time and discrete time systems solvability conditions and Solutions - solutions to measurement feedback case. Text Books: 1. Ben M. ChenRobust and H∞ Control Springer Verlag 2000. 2. K. Zhon John C. DoyleEssentials of Robust Control Prentic Hall 1998. Reference: 1. S. P. Bhattacharya H. Chapellat. Robust Control - The Parametric Approach Prentice Hall1995. 2. Petros A. Ioannou Jing Sun Robust Adaptive Control Prentice Hall.1995. 3. M. Morari and E. Zafiriou Robust Process Control Prentice Hall 1989. 4. J. C. Doyle B. A. Francis and A. R. Tannenbaum Feedback Control Theory Macmillan1992. 5. Optimal Controller A General Robust Control in Control System Toolbox:- Robust Analysis Robust Model Reduction:- MATLAB Mathwork Inc. 1992. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 60 Problem derivation and Proof

slide 101:

101 Ekeeda - Applied Electronics and Instrumentation Engineering 08.835 VLSI STRUCTURES FOR SIGNAL PROCESSINGA : 2-1-0 Credits: 3 Module I Pipelining of FIR digital filters – parallel processing for FIR systems – combined pipelining and parallel processing of FIR filters for low power – Pipelining in IIR filters – parallel processing for IIR filters – combined pipelining and parallel processing of FIR filters. Module II Parallel FIR filters – discrete time cosine transform – implementation of DCT based on algorithm – architecture transformations – parallel architectures for rank order filters. Scaling and round off noise – round off noise in pipelined IIR filters – round off noise in lattice filters – pipelining of lattice IIR digital filters – low power CMOS lattice IIR filters. Module III Evolution of programmable DSP processors – DSP processors for mobile and wireless communications – processors for multimedia signal processing – FPGA implementation of DSP processors -Typical architecture of DSP processor in FPGA. References: 1. Keshab K. Parhi VLSI Digital signal processing Systems: Design and Implementation John Wiley Sons 1999. 2. BayoumiMagdy.AVLSI Design Methodologies for Digital Signal Processing Architectures BSP India2005. 3. Keshab. K. Parhi Takao Nishitani Digital Signal Processing for Multimedia Systems Marcel DekkerInc1999 4. Uwe meyer-Baes DSP with Field programmable gate arrays Springer 2001. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Problems derivations and proofs

slide 102:

102 Ekeeda - Applied Electronics and Instrumentation Engineering 08.845 VLSI DEVICE PROCESS SIMULATION A L-T-P : 2-1-0 Credits: 3 Module I Introduction to VLSI Design methodologies - Review of Data structures and algorithms Review of VLSI Design automation toolsAlgorithmic Graph Theory and Computational Complexity. Tractable and Intractable problems.General purpose methods for combinatorial optimization. Layout Compaction - Design rules problem formulationalgorithms for constraint graph compaction. Module II Partition- Kernigham-Lin’s algorithm Fiduccia Mattheyes algorithm Krishnamurty extension hMETIS algorithm multilevel partition techniques. Floor-Planning- Hierarchical design wire length estimation slicing and non-slicing floor plan polar graph representation operator concept Stockmeyer algorithm for floor planning mixed integer linear program. Placement- Design types ASICs SoC microprocessor RLM Placement techniques Simulated annealing partition-based analytical and Hall’s quadratic Timing and congestion considerations. Module III Routing- Detailed global and specialized routing channel orderingchannel routing problems and constraint graphs routing algorithms Yoshimura and Kuh’s method zone scanning and net mergingboundary terminal problem minimum density spanning forest problem topological routing cluster graph representation. Sequential Logic Optimization and Cell Binding- State based optimization state minimization algorithms- Library binding and its algorithms. Text Books: 1. Sarrafzadeh M. and Wong C.K. An Introduction to VLSI Physical Design 4/e McGraw-Hill. 2. N.A. SherwaniAlgorithms for VLSI Physical Design Automation 3/e BSPIndia. 3. S.H. Gerez Algorithms for VLSI Design Automation John Wiley Sons2002. 4. Lim S.K. Practical Problems in VLSI Physical Design Automation Springer.2008 Reference: 1. Wolf W. Modern VLSI Design System on Silicon 2/e Pearson Education.2000 2. Sait S.M. and Youssef H. VLSI Physical Design Automation: Theory and Practice World Scientific.1999 3. Dreschler R. Evolutionary Algorithms for VLSI CAD 3/eSpringer. 2002 4. Hill D. D. Shugard J. Fishburn and K. Keutzer Algorithms and Techniques forVLSI Layout Synthesis Kluwer Academic Publishers1989. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Algorithms and design problems

slide 103:

103 Ekeeda - Applied Electronics and Instrumentation Engineering MODELLING SIMULATION OF DYNAMIC SYSTEMS A L-T-P : 2-1-0 Credits: 3 Module I Introduction of System Modeling - Mathematical modeling of Systems by transfer function approach and state space approach. Mathematical modeling of Electrical Systems Mechanical and electromechanical systems Analogous Systems. Converting transfer function model to state space model and vice versa. Mathematical Modeling - Liquid level systems Pneumatic systems Hydraulic systems Thermal systems Chemical systems. Automatic/Industrial Controllers. Robust PID Controllers. Module II Introduction to simulation. Motivational examples. Discrete Event Models. Modeling of Uncertainty. Random Number generation and Random Variate Generation. Test of Random number sequences and goodness of fit tests. Simulation languages. GPSS SIMSCRIPT. Module III Selection of Input Probability distribution. Multivariate and time-series input models. Verification of Simulation models. Validation of Simulation models. Variance reduction and output analysis. Modelling and simulation of - Instrument Servo Two Car train Inverted Pendulum Pendulum on a Cart Hydraulically actuated gun turret Two axis Gyroscope Distillation Columns. Text Books: 1. B. FriedlandAn introduction to State Space MethodsMc.Graw Hill.1986. 2. K. OgattaSystems Dynamics3/ePrentice Hall. 3. J. Banks J. S. Carson B. L. Nelson and D. M. Nicol Discrete Event System Simulation 3/ePearson Education. References: 1. Umez-Eronini System Dynamics and Control Brooks/Cole – Publishing Company1999. 2. A. M. Law and W. D. Kelton Simulation Modeling And Analysis 3/e McGraw Hill. 3. W. D. Kelton R. P. Sadowski and D. A. Sadowski Simulation With Arena 3/eMcGraw Hill. 4. Sheldon M. Ross Simulation 3/e Academic Press. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Problem derivation and Proof

slide 104:

104 Ekeeda - Applied Electronics and Instrumentation Engineering 08.816 REVERSIBLE LOGIC DESIGN A L-T-P : 2-1-0 Credits: 3 Module I Reversible Computation - Reversible Turing machine- Entropy of Logic gates - Energy and Information Loss - Reversible Logic Gates- requirements - NOT k-CNOT TOFFOLI gates FRedkin gate. E limination of Garbage in two valued reversible circuits. Combinational reversible circuits. Normal Galois Forms- Invariant valued families of generalized spectral transforms. Shanon/Davio S/D Trees- Binary S/D Trees- Ternary S/D Trees . Generalized Inclusive Forms GIF- Ternary Inclusive Forms – Quaternary S/D Trees. Module II Lattice Structures- Symmetry indices- Two and Three Dimensional Lattice Structures- Shannon Davio Lattice Structures. Reversible Lattice structures. Modified Reconstructability Analysis MRA- Two valued and multiple valued. Reversible Decision Diagrams. Module III Quantum Computation and quantum logics :-review of linear algebra- qubits- postulates of quantum mechanics- the density operator- quantum computation and measurement. Physical realization of quantum computers. Text Books: 1. AN Al-Rabadi Reversible Logic Synthesis Springer 2004. 2. Michael A Neelsen Issac L Chauang Quantum Computation and Quantum Information CUP 2003. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Problem derivation and Proof

slide 105:

105 Ekeeda - Applied Electronics and Instrumentation Engineering 08.826 CONTROL OF POWER CONVERTERS A : 2-1-0 Credits: 3 Module I Introduction to Motor Drives: Components of Power Electronic Drives Criteria for selection of Drive components. DC Motor Drives: Equivalent circuit of DC Motor Block diagram and transfer function Principle of DC Motor control Two quadrant three phase converter controlled DC Motor drives Four-quadrant converter circuit. Module II Induction Motor Drives: Induction Motor equivalent circuit Block diagram and transfer function Speed control by varying stator frequency and voltage Principle of vector control Comparison of vector control and scalar control Voltage source inverter driven induction motor. Synchronous Motor Drives: Basic principles of synchronous motor operation and its equivalent circuit Methods of control. Module III Application of PWM in control of DC-DC converters and DC-AC Classification of PWMQuasi square wave PWM Frequency spectrum of PWM signals Sinusoidal PWM Space vector PWM Comparison of SPWM and SVPWM Selective harmonic elimination PWM Hysterisis controller. Text Books: 1. R.Krishnan Electric Motor drives – Modeling Analysis and Control PHI 2008. 2. L Umanand Power Electronics Essentials and Applications Wiley India 2009. 3. Ned Mohan et. al Power Electronics : Converters Applications and Design2/e John Wiley. Reference: 1. Theodore Wildi Electrical Machines Drives and Power Systems 6/ePearson Education. 2. W.Shephered L N HulleyPower Electronics Control of Motor Cambridge University Press. 3. BubeyPower Electronics DrivesWiley Eastern. Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 50 Problems and design

slide 106:

106 Ekeeda - Applied Electronics and Instrumentation Engineering 08.836 VIRTUAL INSTRUMENTATION A L-T-P : 2-1-0 Credits: 3 Module I Virtual Instrumentation - Historical perspective advantages block diagram and architecture of a virtual instrument data-flow techniques graphical programming in data flow comparison with conventional programming. Development of Virtual Instrument using GUI Real-time systems Embedded Controller OPC HMI / SCADA software Active X programming. VI programming techniques - VIs and sub-VIs loops and charts arrays clusters and graphs case and sequence structures formula nodes local and global variables string and file I/O Instrument Drivers Publishing measurement data in the web. Module II Data acquisition basics - Introduction to data acquisition on PC Sampling fundamentals Input/Output techniques and buses. ADC DAC Digital I/O counters and timers DMA Software and hardware installation Calibration Resolution Data acquisition interface requirements. VI Chassis requirements. Common Instrument Interfaces - Current loop RS 232C/ RS485 GPIB. Bus Interfaces - USB PCMCIA VXI SCSI PCI PXI Firewire. PXI system controllers Ethernet control of PXI. Module III Networking basics for office Industrial applications. VISA and IVI. VI toolsets.Distributed I/O modules. Application of Virtual Instrumentation - Instrument Control Development of process database management system Simulation of systems using VI Development of Control system Industrial Communication Image acquisition and processing Motion control. Text Books: 1. Gary Johnson LabVIEW Graphical Programming 2/e McGraw Hill. 2. Jane W. S. Liu Real-time Systems Pearson Education 2001. 3. Jean J. Labrosse Embedded Systems Building Blocks:Complete and Ready-to-use Modules in C2/e CMP Books. Reference Books: 1. Kevin James PC Interfacing and Data Acquisition: Techniques for Measurement Instrumentation and Control Newnes 2000. 2. Jean J. Labrosse “MicroC/OS-II. The Real-time Kernal” CMP Books 2002. 3. S.Gupta and J.P.GuptaPC Interfacing for data acquisition and Process control Instrument Society of America. 4. National Instruments Inc. BishopLab View 8 Student Edition Prentice Hall2007. 5. Peter A Blume The Lab View Style Book Prentice Hall 2007. Web Resources: 1. www.ni.com 2. www.ltrpub.com Question Paper The question paper shall consist of two parts. Part I is to cover the entire syllabus and carries 40 marks. This shall contain 10 compulsory questions of 4 marks each. Part II is to cover 3 modules and carries 60 marks. There shall be 3 questions from each module 10 marks each out of which 2 are to be answered. Minimum 25 Problems derivations and proofs

slide 107:

107 Ekeeda - Applied Electronics and Instrumentation Engineering 08.846 CURRENT TOPICS A L-T-P : 2-1-0 Credits: 3 The syllabus shall contain current area of research in Applied Electronics Instrumentation 45hrs. which shall meet the pattern of the elective subjects given in the eighth semester. It shall not be a repetition of any subject or contents of a subject in the syllabus given. The syllabus shall be approved by the Board of Studies of the University before the commencement of semester.

slide 108:

108 Ekeeda - Applied Electronics and Instrumentation Engineering 08.807 PROCESS CONTROL LAB A L-T-P : 0-0-4 Credits: 4 1. Experimental study of PPDPI and PID controllers on levelflowtemperature and pressure loops. 2. Experimental study of ON-OFF controller and ON- OFF controller with neutral zone on temperature control systems. 3. Controller tuning using continuous cycling method. 4. Controller tuning using process reaction curve method. 5. Control valve characteristics. 6. Experimental study of RatioCascade and Feed forward control systems. 7. PLC based Water levelBottle filling and Motor speed control systems. 8. Calibration of pressure gauge. 9. Design and testing of RTD based temperature transmitter. 10. Experimental study of Inertial control systems. 11. Experimental study of Binary distillation process. Internal Marks: 50 1. Attendance - 10 2. Class work - 20 3. Practical internal Test - 20 Note: For University examination the following guidelines should be followed regarding award of marks a Circuit and design - 20 b Performance Wiring usage of equipments and trouble shooting - 15 c Result - 35 d Viva voce - 25 e Record - 05 Practical examination to be conducted covering entire syllabus given above. Students shall be allowed for the University examination only on submitting the duly certified record. The external examiner shall endorse the record.

slide 109:

109 Ekeeda - Applied Electronics and Instrumentation Engineering 08.808 PROJECT TA L-T-P : 0-0-5 Credits: 3 Internal Evaluation only 150 marks Each student shall complete the project work assigned to him/her and submit the project report by the end of the semester. This report consisting of problem statement design implementation results and analysis shall be of a hard bound type. The report shall be endorsed by the Guide Project co-ordinator and the Professor/HOD. Evaluation of report results presentation and viva will be conducted by a committee consisting of the Project co-ordinator Guide and a senior faculty. The number of students in a project batch shall be limited to a maximum of four. The project shall be done in the Institute where the student is doing the course Marks shall be awarded as follows: 1. Mid semester evaluation by the committee - 50 Marks. 2. End semester evaluation Viva by the committee - 50 Marks. 3. Evaluation of the report and results by Guide - 50 Marks.

slide 110:

110 Ekeeda - Applied Electronics and Instrumentation Engineering 08.809 VIVA - VOCE TA : 0-0-0 Credits: 2 University Examination only 100 Marks Minimum pass mark is 40. Examiners shall be faculty members having minimum of five years teaching experience Viva-Voce examination shall be based only on the subjects studied in the course. Students shall submit the following while attending the viva-voce 1. Seminar Report Certified during 7 th Semester 2. Project Design Report Certified during 7 th Semester 3. Project Report Certified during 8 th Semester External Examiner shall endorse all the Reports. Marks shall be awarded as follows: 1. Questions based on subjects in the course : 70 Marks 2. Questions based on Project : 20 Marks 3. Questions based on Seminar : 10 Marks Note: Students shall not be permitted to attend the Viva-Voce examination if he/she does not submit the certified Project reports and Seminar report to the External Examiner for endorsing.

authorStream Live Help