What Makes Cylindrical Locks Different From The Other Kinds Of Locks?

Views:
 
     
 

Presentation Description

The cylindrical locks go through the entire door and not every kind of lock is capable of doing this, and, this makes these locks different from various other kinds of locks. These locks possess a lever or knob on every end and the lever or the knob retracts the latch present on the lock at a time when it is pressed or turned.

Comments

Presentation Transcript

slide 1:

What Makes Cylindrical Locks Different From The Other Kinds Of Locks The cylindrical locks go through the entire door and not every kind of lock is capable of doing this and this makes these locks different from various other kinds of locks. These locks possess a lever or knob on every end and the lever or the knob retracts the latch present on the lock at a time when it is pressed or turned. The commonly used method of fixing a cylindrical lock is via the method of “boring.” Here in this method a couple of holes get bored into a door and that too at perpendicular angles. Between the two holes one hole tends to be larger compared to the other and it is bored into the door’s face. The smaller hole is bored into the door’s side and the side hole includes an additional layer of security as it permits a metal bar to get inserted via it. People prefer to use a cylindrical lock as they can install it quickly. For installing it you require only a drill. You can accomplish this task with an electric drill and you can also install the lock in lesser than an hour. After the holes get drilled the lock parts are pushed into place and they are secured with screws and this makes the lock ready for use. The remarkable thing is you aren’t needed to use a deadbolt. At times it becomes exceedingly easy to install the lock and there are quite a few doors that are found with pre-drilled holes in them and this makes the process of installing a cylindrical lock easy. Types of hinges for doors Amongst many kinds of door hinges for home the main ones are: Barrel hinge – This hinge possesses a screw-shaped part that is used for fastening or driving the pivot. Pivot hinges – This hinge is a low-cost substitute for using with your lightweight doors./liliMortise and butt hinges – These hinges are ideal for exterior doors and are made of stainless steel or brass for preventing corrosion. Case hinges – These hinges are usually used in briefcases suitcases etc. and turns out to be decorative nature.

slide 2:

Spring hinge – It is a spring-loaded hinge and is intended to propose assistance in the opening or closing of the hinge leaves.

authorStream Live Help