Flanged Coupling

Views:
 
Category: Entertainment
     
 

Presentation Description

Flange couplings for connecting two cylinders are completed smoothly and fixedly. This two-piece coupling unit includes a receiving surface with a key so that the end of the flat ground is fixed, so that it can reach the opposite end of the tube with the end of the flat ground. Each flange has a male or female coupling opening, so when the two ends meet, there is no resistance and the material does not resist and balance.

Comments

Presentation Transcript

slide 1:

Title:- Flange Couplings Flange couplings for connecting two cylinders are completed smoothly and fixedly. This two-piece coupling unit includes a receiving surface with a key so that the end of the flat ground is fixed so that it can reach the opposite end of the tube with the end of the flat ground. Each flange has a male or female coupling opening so when the two ends meet there is no resistance and the material does not resist and balance. This male or female joint technology creates a stable joint that is difficult to move while firmly maintaining the flange joint. Flange Coupling:- Flange couplings are the most commonly used standard type of couplings. It is a type of connector between spinning suits with two matrices. The flange is mounted or provided towards the shaft finish. The vertebrae are joined together in a different way to the nuts and bolts. One of these flanges or ramps is fixed towards the finish of each axis. If the coupling is used during activity and work the shaft will not be locked. In any case the coupling has a torque limit and if a similar limit exceeds the point that exceeds a certain point the axis may fall flat or the axis may separate. Keys:- The key is a mechanical component used to anticipate all kinds of relative rotational development between the mounted shaft and the parts mounted on it. To make a joint a groove is cut from the outside of the shaft and the hub of the piece to be assembled.

slide 2:

When mounted in the central area of the shaft the key is firmly fixed in the keyway of the shaft and then slides until the parts to be mounted are completely locked. Types of Flange Coupling:- Couplings occur because after the purchase of expensive and expensive pumps and motors they must be connected for maximum use and at the same time provide protection. The union of the two axes is inevitable can be aligned perfectly and is simple if the axis does not move due to the vibration of the machine. In general there are three types of flange couplings. It can be classified as protective flange coupling unprotected flange coupling and ship flange coupling.

authorStream Live Help