logging in or signing up Atomic Emission Spectroscopy dangngocly Download Post to : URL : Related Presentations : Share Add to Flag Embed Email Send to Blogs and Networks Add to Channel Uploaded from authorPOINT lite Insert YouTube videos in PowerPont slides with aS Desktop Copy embed code: Embed: Flash iPad Copy Does not support media & animations WordPress Embed Customize Embed URL: Copy Thumbnail: Copy The presentation is successfully added In Your Favorites. Views: 501 Category: Entertainment License: All Rights Reserved Like it (3) Dislike it (0) Added: August 04, 2011 This Presentation is Public Favorites: 0 Presentation Description No description available. Comments Posting comment... Premium member Presentation Transcript Atomic Emission Spectroscopy. : Atomic Emission Spectroscopy. Chem. 331Introduction: Introduction Atomic absorption is the absorption of light by free atoms. An atomic absorption spectrophotometer is an instrument that uses this principle to analyze the concentration of metals in solution. The substances in a solution are suctioned into an excited phase where they undergo vaporization, and are broken down into small fragmented atoms by discharge, flame or plasma.Atomic Emission Spectroscopy: Atomic Emission Spectroscopy By exposing these atoms to such temperatures they are able to “jump” to high energy levels and in return, emit light. The versatility of atomic absorption an analytical technique (Instrumental technique) has led to the development of commercial instruments. In all, a total of 68 metals can be analyzed.Advantages of AA: Advantages of AA Determination of 68 metals Ability to make ppb determinations on major components of a sample Precision of measurements by flame are better than 1% rsd. There are few other instrumental methods that offer this precision so easily. AA analysis is subject to little interference. Most interference that occurs have been well studied and documented. Sample preparation is simple (often involving only dissolution in an acid) Instrument easy to tune and operateFlame Emission and Atomic Absorption Spectroscopy (3 main types): Flame Emission and Atomic Absorption Spectroscopy ( 3 main types) Atomic Emission (with thermal excitation), AES Atomic Absorption, (with optical photon unit) AAS Atomic Florescence, AFSAES experiment set-up: AES experiment set-upThree types of high-temperature plasmas : Three types of high-temperature plasmas The inductively coupled plasma (ICP). The direct current plasma (DCP). The microwave induced plasma (MIP). The most important of these plasmas is the inductively coupled plasma (ICP).The Direct Current Plasma Technique : The Direct Current Plasma Technique The direct current plasma is created by the electronic release of the two electrodes. The samples are placed on an electrode. In the technique solid samples are placed near the discharge to encourage the emission of the sample by the converted gas atoms.Picture of an inductively-coupled plasma atomic emission spectrometer: Picture of an inductively-coupled plasma atomic emission spectrometer A typical inductively coupled plasma source called a torch : A typical inductively coupled plasma source called a torchAtomic Emission Spectroscopy: Atomic Emission Spectroscopy Qualitative analysis is done using AES in the same manner in which it is done using FES. The spectrum of the analyte is obtained and compared with the atomic and ionic spectra of possible elements in the analyte. Generally an element is considered to be in the analyte if at least three intense lines can b matched with those from the spectrum of a known element. Quantitative analysis with a plasma can be done using either an atomic or an ionic line. Ionic lines are chosen for most analyses because they are usually more intense at the temperatures of plasmas than are the atomic lines.AES WITH ELECTRICAL DISCHARGES : AES WITH ELECTRICAL DISCHARGES An electrical discharge between two electrodes can be used to atomize or ionize a sample and to excite the resulting atoms or ions. The sample can be contained in or coated on one or both of the electrodes or the electrode(s) can be made from the analyte. The second electrode which does not contain the analyte is the counter electrode. Electrical discharges can be used to assay nearly all metals and metalloids. Approximately 72 elements can be determined using electrical discharges. For analyses of solutions and gases the use of plasmas is generally preferred although electrical discharge can be used. Solid samples are usually assayed with the aid of electrical discharges. Typically it is possible to assay about 30 elements in a single sample in less than half an hour using electrical discharges. To record the spectrum of a sample normally requires less than a minute.ELECTRODES FOR AES : ELECTRODES FOR AES The electrodes that are used for the various forms of AES are usually constructed from graphite. Graphite is a good choice for an electrode material because it is conductive and does not spectrally interfere with the assay of most metals and metalloids. In special cases metallic electrodes (often copper) or electrodes that are fabricated from the analyte are used. Regardless of the type of electrodes that are used, a portion of each of the electrodes is consumed during the electrical discharge. The electrode material should be chosen so as not to spectrally interference during the analysis.WAVELENGTH SELECTION AND DETECTION FOR AES : WAVELENGTH SELECTION AND DETECTION FOR AES Arc and spark instruments normally contain non scanning monochromators. Either a series of slits is cut in the focal plane of the monochromator and a photomultiplier tube is placed behind each slit that corresponds to the wavelength of a line that is to be measured, or one or more photographic plates or pieces of film are placed on the focal of the monochromator.QUALITATIVE ANALYSIS WITH ARC AND SPARK AES : QUALITATIVE ANALYSIS WITH ARC AND SPARK AES Qualitative analysis is performed by comparing the wavelengths of the intense lines from the sample with those for known elements. It is generally agreed that at least three intense lines of a sample must be matched within a known element in order to conclude that the sample contains the elementQUANTITATIVE ANALYSIS WITH ARC AND SPARK AES.: QUANTITATIVE ANALYSIS WITH ARC AND SPARK AES. Regardless of the type of detection used for the assay, the precision of the results can be improved by matrix-matching the standards with the sample. Use of the internal-standard method also improves precision. Usually a working curve is prepared by plotting the ratio or logarithm of the ratio of intensity of the standard's line to the internal standard's line as a function of the logarithm of the concentration of the standard. The corresponding ratio for the analyte is obtained and the concentration determined from the working curve.References : References www.anachem.umu.se/jumpstation.htm www.anachem.umu.se/cgi/jumpstation.exe?AtomicSpectroscopy www.anachem.umu.se/cgi/jumpstation.exe?OpticalMolecularSpectroscopy www.minyos.its.rmit.edu.au/~rcmfa/mstheory.html http://science.widener.edu/sub/ftir/intro_it.html http://www.s-a-s.org/ http://www.chemsw.com http://www.scimedia.com/chem-ed/spec/atomic/aa.htm http://nercdg.org http://www.analyticon.com www.lcgmag.com/ www.lcms.com/ www.dq.fct.unl.pt/QOF/Chroma.html www-ssg.chem.utas.edu.au/References (Cont’d.): References ( Cont’d.) www.yahoo.com/science/chemistry/chromatography/ www.onlinegc.com http://www.aurora-instr.com http://www.chem.ufl.edu/~itl/3417_s98/spectroscopy/aes.htm http://www.rohan.sdsu.edu/staff/drjackm/chemistry/chemlink/analytic/analyt1.html http://www.cofc.edu/~deavorj/521/jpd521.htm http://www.scimedia.com/chem-ed/spec/atomic/aes.htm http://elchem.kaist.ac.kr/vt/chem-ed/spec/atomic/aes.htm http://www.chemistry.adelaide.edu.au/external/soc-rel/content/icp.htm http://employees.oneonta.edu/schaumjc/chm361/iron.doc You do not have the permission to view this presentation. In order to view it, please contact the author of the presentation.