Tools – Hand and Power :1 Tools – Hand and Power


Hazards :2 Hazards Workers using hand and power tools may be exposed to these hazards: objects that fall, fly, are abrasive, or splash harmful dusts, fumes, mists, vapors, and gases frayed or damaged electrical cords, hazardous connections and improper grounding


Basic Tool Safety Rules :3 Basic Tool Safety Rules Maintain regularly Use right tool for the job Inspect before use Operate according to manufacturers’ instructions Use the right personal protective equipment (PPE) Use guards


Hand Tool Hazards :4 Hand Tool Hazards Hazards are usually caused by misuse and improper maintenance Do not use: wrenches when jaws are sprung impact tools (chisels and wedges) when heads have mushroomed tools with loose, cracked or splintered handles a screwdriver as a chisel tools with taped handles – they may be hiding cracks Crack


Hand Tools - Protection :5 Hand Tools - Protection Use PPE, such as safety goggles and gloves Keep floor surface where working free from debris and tripping or slipping hazards Keep cutting tools sharp


Power Tools :6 Power Tools Must be fitted with guards and safety switches Extremely hazardous when used improperly Different types,determined by their power source: Electric Pneumatic Liquid fuel Hydraulic Powder-actuated


Switches :7 Switches Hand-held power tools must be equipped with one of the following: Constant pressure switch shuts off power upon release Examples: circular saw, chain saw, grinder, hand-held power drill On-Off Switch Examples: routers, planers, laminate trimmers, shears, jig saws, nibblers, scroll saws


Power Tools - Precautions :8 Power Tools - Precautions Disconnect tools when not in use, before servicing and cleaning, and when changing accessories Keep people not involved with the work away from the work Secure work with clamps or a vise, freeing both hands to operate the tool Don’t hold the switch button while carrying a plugged-in tool Keep tools sharp and clean Consider what you wear – loose clothing and jewelry can get caught in moving parts Remove damaged electric tools & tag them: “Do Not Use”


Power Tools – PrecautionsElectric Cords :9 Power Tools – PrecautionsElectric Cords Don’t carry portable tools by the cord Don’t use electric cords to hoist or lower tools Don’t yank cord or hose to disconnect it Keep cords and hoses away from heat, oil, and sharp edges


Electric Power Tools :10 To protect a worker from shock, these tools must: have a 3-wire cord plugged into a grounded receptacle be double insulated, or be powered by a low-voltage isolation transformer Electric Power Tools Double insulated markings Plug with a grounding pin


Electric Tools – Good Practices :11 Electric Tools – Good Practices Operate within design limits Use gloves and safety shoes Store in a dry place Don’t use in wet locations unless approved for that Keep work areas well lit Ensure cords don’t present a tripping hazard


Abrasive Wheels and Tools :12 Abrasive Wheels and Tools May throw off flying fragments Equip with guards that: Cover the spindle end, nut, & flange projections Maintain proper alignment with the wheel Don’t exceed the strength of the fastenings Guard so that a minimal amount of the wheel is exposed


Inspecting Abrasive Wheels :13 Inspecting Abrasive Wheels Before mounting: inspect closely for damage perform sound- or ring-test to ensure free from cracks / defects To test: tap wheel gently with a light, non-metallic instrument if wheel sounds cracked or dead, do not use it because it could fly apart


Abrasive Wheel Use :14 Abrasive Wheel Use To prevent cracking: fit the wheel on the spindle freely tighten the spindle nut enough to hold the wheel in place without distorting the flange Let the tool come up to speed prior to grinding or cutting Don’t stand in front of the wheel as it comes up to full speed Use eye and/or face protection Ensure the spindle speed doesn’t exceed the maximum speed marked on the wheel


Abrasive Wheel Work Rests :15 Abrasive Wheel Work Rests Keep work rests not more than 1/8th inch from wheel surface This prevents jamming the work between the wheel and the rest, which may cause the wheel to break Don’t adjust wheel while it’s rotating


Guarding :16 Guarding Guard exposed moving parts of power tools Guard belts, gears, shafts, pulleys, sprockets, spindles, flywheels, chains, or other moving parts Never remove a guard when a tool is in use


Guarding - Point of Operation :17 The point of operation is where the work is actually performed on the materials – it must be guarded Guarding - Point of Operation This shows a radial arm saw equipped with proper point of operation guards


Guarding Protection :18 Guarding Protection Machine guards must protect the operator and others from: Point of operation In-running nip points Rotating parts Flying chips and sparks Nip Point


Radial Saw Guarding :19 Guard to prevent the operator from coming in contact the the rotating blade Radial Saw Guarding Radial arm saw equipped with an upper and lower blade guard


Guarding Portable Circular Saws :20 Guard these saws above and below the base plate or shoe. The lower guard must cover the saw to the depth of the teeth. Guarding Portable Circular Saws


Table Saw Guarding :21 Use a hood for guarding Hood guard Table Saw Guarding


Pneumatic Tools :22 Pneumatic Tools Powered by compressed air Includes nailers, staplers, chippers, drills & sanders Main hazard - getting hit by a tool attachment or by a fastener the worker is using with the tool Take the same precautions with an air hose that you take with electric cords Nail Gun - Cut-Away View


Pneumatic Tools - Fastening :23 Pneumatic Tools - Fastening Ensure tool is fastened securely to the air hose to prevent a disconnection Use a short wire or positive locking device attaching the air hose to the tool Wire used to secure hose


Pneumatic Tool Connections :24 Pneumatic Tool Connections  Unacceptable  Acceptable Hose clamp


Pneumatic Tool Safety :25 Pneumatic Tool Safety Place a safety device on the muzzle to prevent the tool from ejecting fasteners, unless the muzzle is in contact with work surface Install a safety clip or retainer to prevent attachments, such as chisels on a chipping hammer, from being ejected Wear eye protection. Wear hearing protection with jackhammers. Muzzle in contact with work surface


Compressed Air Cleaning :26 Compressed Air Cleaning Don’t use compressed air for cleaning Exception - where reduced to less than 30 p.s.i. with effective chip guarding and PPE


Liquid Fuel Tools :27 Liquid Fuel Tools Usually gas powered Main hazard – fuel vapors Use only approved flammable liquid containers Before refilling a fuel-powered tool tank, shut down the engine and allow it to cool


Powder-Actuated Tools :28 Powder-Actuated Tools User must be trained and licensed to operate Test tool each day before loading to ensure the safety devices are working properly Wear suitable ear, eye, and face protection Select a powder level that will do the work without excessive force


Fatal Fact :29 Fatal Fact Employee killed when struck in head by a nail fired from a powder actuated tool. Tool operator was attempting to anchor a plywood form in preparation for pouring a concrete wall


Easily Penetrated Material :30 Easily Penetrated Material Avoid driving into materials easily penetrated unless materials are backed by a substance that will prevent the pin or fastener from passing through Also, don’t drive fasteners into very hard or brittle material that might chip or splatter, or make the fasteners ricochet


Powder-Actuated Tool Safety Tips :31 Powder-Actuated Tool Safety Tips Don’t use in explosive or flammable atmosphere Inspect tool before use to ensure: it is clean, that moving parts operate freely the barrel is free from obstructions and has the proper shield, guard, and attachments Don’t load the tool unless using immediately Don’t leave a loaded tool unattended Keep hands clear of the barrel end Never point the tool at anyone Store unloaded in a locked box


Jacks :32 Jacks To set up a jack, ensure: The base is on a firm, level surface It’s centered The jack head is placed against a level surface You apply the lift force evenly Lubricate and inspect jacks regularly


Jacks - Capacity :33 Jacks - Capacity The manufacturer's rated capacity must be marked on all jacks and must not be exceeded All jacks must have a stop indicator that is not exceeded


Jacks - Blocking :34 Immediately block the load after it is lifted. Put a block under the base of the jack when the foundation is not firm, and place a block between the jack cap and load if the cap might slip. Jacks - Blocking Photo - handyman jack is provided a firm base by using the railroad tie. The load is cribbed to prevent it from falling.


Summary :35 Summary Hazards are usually the result of improper tool use or not following one or more of these protection techniques: Inspecting the tool before use Using PPE (Personal Protective Equipment) Using guards Properly storing the tool Using safe handling techniques