homepage

This is the empty computer case that was ordered. It will be used in a custom build project. :This is the empty computer case that was ordered. It will be used in a custom build project.


Here is that same case open. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open.


This is the old computer with the case off. I will take the good parts out and place them in the new case. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case.


This is a closer look inside the old computer. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer.


This is the new motherboard that was purchased for the custom build pc. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc.


This is the memory that was purchase for the new motherboard. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard.


Here is the new case before the seating of the motherboard. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard.


Here I am placing the new motherboard in it's new case. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case.


I am now making sure the motherboard is screwed to the case. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case.


In this picture I have seated and secured both the old CD-ROM and floppy drive. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive.


I am checking to making sure all the components are connected properly. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly.


This is the new computer and it is ready for use. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use.


This is the old computer with all the usable parts removed. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed.


I built this computer from scratch. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch.


This computer contains a floppy drive, a CD-ROM and a CD-RW drive. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive.


I really love the color display. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display.


This is the inside of the computer. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer.


Here I am checking to make sure there is a valid IP address. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address.


I am checking the router configuration. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration.


It is important to make sure that the updates are installed. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed.


I am configuring Kim router. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed. I am configuring Kim router.


I needed to make sure there was an internet connection. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed. I am configuring Kim router. I needed to make sure there was an internet connection.


I am adding the MAC address of the network adapters from both laptops. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed. I am configuring Kim router. I needed to make sure there was an internet connection. I am adding the MAC address of the network adapters from both laptops.


Here I am configuring the router security. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed. I am configuring Kim router. I needed to make sure there was an internet connection. I am adding the MAC address of the network adapters from both laptops. Here I am configuring the router security.


Here I am checking the connection of the laptop. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed. I am configuring Kim router. I needed to make sure there was an internet connection. I am adding the MAC address of the network adapters from both laptops. Here I am configuring the router security. Here I am checking the connection of the laptop.


All is good, everything checks out. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed. I am configuring Kim router. I needed to make sure there was an internet connection. I am adding the MAC address of the network adapters from both laptops. Here I am configuring the router security. Here I am checking the connection of the laptop. All is good, everything checks out.


Here I am about ready to wrap it up. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed. I am configuring Kim router. I needed to make sure there was an internet connection. I am adding the MAC address of the network adapters from both laptops. Here I am configuring the router security. Here I am checking the connection of the laptop. All is good, everything checks out. Here I am about ready to wrap it up.


I love working on computers. :This is the empty computer case that was ordered. It will be used in a custom build project. Here is that same case open. This is the old computer with the case off. I will take the good parts out and place them in the new case. This is a closer look inside the old computer. This is the new motherboard that was purchased for the custom build pc. This is the memory that was purchase for the new motherboard. Here is the new case before the seating of the motherboard. Here I am placing the new motherboard in it's new case. I am now making sure the motherboard is screwed to the case. In this picture I have seated and secured both the old CD-ROM and floppy drive. I am checking to making sure all the components are connected properly. This is the new computer and it is ready for use. This is the old computer with all the usable parts removed. I built this computer from scratch. This computer contains a floppy drive, a CD-ROM and a CD-RW drive. I really love the color display. This is the inside of the computer. Here I am checking to make sure there is a valid IP address. I am checking the router configuration. It is important to make sure that the updates are installed. I am configuring Kim router. I needed to make sure there was an internet connection. I am adding the MAC address of the network adapters from both laptops. Here I am configuring the router security. Here I am checking the connection of the laptop. All is good, everything checks out. Here I am about ready to wrap it up. I love working on computers.