How to Pour a Cement Driveway

Views:
 
Category: Entertainment
     
 

Presentation Description

After which, one should screed the surface of the cement using a 2 by 4 length of lumber and 2 feet longer than the width of the driveway. This can be done by laying the wood across the width of driveway at the top and by using a seesaw movement, one can move the lumber across the surface of the driveway in order to remove excessive water and cement.

Comments

Presentation Transcript

driveways:

driveways By John Sanders

John Sanders's Bio::

John Sanders's Bio: Hi, I'm John Sanders. I've been the foreman for a variety of construction companies in the past but I currently work at Peterson Cement.

PowerPoint Presentation:

A fter which, one should screed the surface of the cement using a 2 by 4 length of lumber and 2 feet longer than the width of the driveway. This can be done by laying the wood across the width of driveway at the top and by using a seesaw movement, one can move the lumber across the surface of the driveway in order to remove excessive water and cement.

Please visit our website, driveways:

Please visit our website, driveways Subsequently, one should make use of shovels to move the cement once it has been poured, keeping it as smooth and level as possible within the framework. It is essential to remove the air bubbles from the freshly poured cement with the use of a tool such as a jitterbug tamper on the surface of the cement. One must continue to even out the concrete surface until the pouring is complete.