3G GPS Tracker GPS Tracking Device


Presentation Description

3G GPS Tracker copyrights: www.cheapcarcamera.com


Presentation Transcript

GPRS/UMTS/GSM/GPS 3G Tracker User Manual:

GPRS/UMTS/GSM/GPS 3G Tracker User Manual Copyrights: cheapcarcamera.com


Summery Working based on HSDPA,UMTS,EDGE,GSM,GPRS network and GPS satellites, this product can also anti-theft, locate, monitor and provide urgent service to any remote targets. It is featured with compact and use-easy characteristics and therefore is mainly used in monitoring, locating and tracking the car and other mobile things. At the same time, it completely support the data transportation function of SMS/GPRS/HSDPA/Internet, making it available for wide-area monitor, urgent dispatch, traffic safety management and many different fields.


Features 1. Use USIM card, support WCDMA 3G network and GSM network. 2 . Use video cables to connect CCD simulated camera externally. 3 . Support SMS/GPRS/ HSDPA/Internet data transportation (GPS/Internet will be illustrated in addition) 4 . Support mobile phone message to control and reach privacy security 5. Support alarm by SMS, voice call and video call. 6. Record a video of alarm process to SD card 7. Built-in Li-ion battery, can work normally even in power off state. 8. Monitor the place any time anywhere by video call. 9. Integrate anti-theft, location, real-time control, monitor, video record, urgent alarm and tracking service. 10. FTP function: use FTP function upload mp4 video file to server. 11. Mainly used in monitoring and locating the ship and train, and in fleet management of moving car and truck.

Production Description:

Production Description

Indicator light instruction:

Indicator light instruction 1. LED indicator light. 2. USB jack. 3. USIM jack. 4. GPS antenna. 5.3G antenna 6 . SD CARD jack. 7. ON/OFF. 8. Connection port. 9 . External camera jack


Specification Content Specification Dim 66x111x27 mm Weight 256g Network HSDPA,UMTS,EDGE,G S M/GPRS Net frequency channel EDGE/GPRS/GSM 850/900/1800/1900 MHz HSDPA/UMTS 850/1900/2100 MHz Chip SIRF3 chip 3G chip WCDMA GPS sensitivity -159dBm GPS accuracy 5m Time to first initiate Cold status 45s Warm status 35s Hot status 1s Input voltage 12V -24V input User-defined input alarm detection level 0V Video form MP4 Battery Chargeable changeable 3.7V 800mAh Li-ion battery Standby 48hours Storage temp -40°C to +85°C Operation temp -20°C to +55°C Humility 5%--95% non-condensing

GPS Picture:

GPS Picture

3G GPS Tracker:

3G GPS Tracker

GSM/GPRS Tracker:

GSM/GPRS Tracker

GPS Tracker Platform:

GPS Tracker Platform

Tracking Vehicle:

Tracking Vehicle

GPS Tracking Device Page:

GPS Tracking Device P age This is product page, more picture and detail: http://www.cheapcarcamera.com/da818-vehicle-dvr-3g-gps-tracker-support-wcdma-gsm-p-151.html Email: cardvr@cheapcarcamera.com

Noun Definition:

Noun Definition Locate mode : In this mode , all the alarming information will be send every 3 minutes with Geo-info and begin to record a video. 3G monitor mode : All the alarm system will inform the master by incoming video call . It will then call the other member one by one until the phone is available if the master is not around. However, the device can dial all the phone numbers for 3 times. After failing 3 times, the unit will stop dialing automatically. Incoming video phone Master and normal members can initiate video by calling the host machine. Arming: in this state, the device will alarm according to the alarming mode of the time if external inputting port is triggered Disarming: I t means to deactivate the alarm state, and the device won’t alarm when the external inputting port is touched.

Hardware Reset:

Hardware Reset Press the emergency button, and slide the switch(ON/OFF) of the tracker to "ON", keep this operation for 5 seconds until green LED become red , the tracker will automatically restore factory settings and clear authorization number after it flicker twice.

Use GPS Tracker:

Use GPS Tracker First step: connection 1. Find the matched wire, and insert the jack of the product. 2. Fix the included camera in the needed cabin ,please turn the camera on the right direction. Insert one end of video plug into the IN1 video jack of host machine, another end used to connect video interface. Finding the included camera power wire , then insert it into the corresponding 12V camera input interface, another end connect the camera CD plug. 3 Connect urgent button with red and black wires. 4 set aside an external inputting jack to alarm , which is called negative triggering, it alarm when the unit is in the defense concealing state. 5. Connect GPS antenna 3G antenna. Tighten the nut 6. Insert the external monitoring microphone to monitoring jack. 7. It can support 8GB SD card at most , mainly used in recording a video when calling the police. 8. Connect the red and black wires (power cord of the unit) to the positive and negative electrodes of the car, red wire to + and black wire to -

SIM card installation:

SIM card installation Make sure that there is no call transfer , incoming call display is on, and PIN code turned off.. SMS must be plain text, can not recognize the PDU form. Open the USIM rear cover , Put the USIM card into the holder, and turn the foil right and fasten it in place.

Power on:

Power on Turn the switch to "ON" , and check whether 3G/GPS antenna is connected or not. At this time, the red light Begin to twinkle. In 10 to 40 seconds, the unit will begin to work and acquire the 3G as well as the GPS signals. The indicator will change to green and keep flashing every 3 seconds. You can set anything according to the user guide.

3G Tracker Cautions:

3G Tracker Cautions 1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry. 2. Don’t use & store the unit in dusty places. 3. Don’t put the unit in overheated or overcooled places. 4. Handle carefully. Don’t vibrate or shake it violently. 5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent. 6. Don’t paint the unit, this may cause some foreign materials left in between the parts. 7. Don’t disassemble or refit the unit. 8. Please read carefully before using the manual to understand the level of each interface circuit, or else does not work or damage the product .

authorStream Live Help