Permanent Vs Electro Lifting Magnets


Presentation Description

This slide is related to Permanent and Electro Lifting Magnets. By this slide you will get some informative information related to Lifting Magnets.


Presentation Transcript

Permanent Vs Electro Lifting Magnets :

Permanent Vs Electro Lifting Magnets

About Lifting Magnets:

Lifting magnets can be used to move a variety of ferrous metals ranging from small bundles of rod or scrap to large and heavy blocks. Both permanent magnets and electromagnets can be constructed to produce different types of magnetic fields. About Lifting Magnets

Permanent Magnets:

It features capacities ranging from 330 pounds to 10,000 pounds. Multiple magnets can be used for heavier loads that are too long for a single unit to handle. Permanent Magnets

Slide 4:

These lifting magnets can be easily turned on and off by simply rotating a lever. Though, a safety latch is built in to ensure that the magnet is not accidentally turned off while performing lift.

Slide 5:

It is manier times machined thin as 0.25 inch which is presented to the machine operator as one of a stack of similar parts.

Slide 6:

It is designed to lift only one piece from the stack at a time. Extremely reliable if applied properly, these are unable to alter the amount of magnetism produced.

Slide 7:

Many machining operations are performed on thick, block-shaped material which is done by permanent magnets.

Slide 8:

The lack of an electrical hookup or a recharging requirement is the biggest strength of these types of magnets.


Electromagnet along with variable voltage control allows the operator to manage the magnetic strength and select only one piece from the stack. Electromagnets

Slide 10:

Electromagnets creates magnetic field by using an energized electrical coil wrapped around a steel core to orient particles within ferrous materials in one direction.

Slide 11:

Though it requires constant power source, it can even be looked at as an advantage depending on how the magnet is being used.

Slide 12:

Generally built to run on DC current, it creates the need for a rectifier.

Slide 13:

This type of lifting magnets is useful for applications where the strength varies or remote controlling is desired.

Slide 14:

Electromagnets are the most cost-effective magnets per pound of lift. And even the capacities can be extended up to 10,500 pounds.

Slide 15:

It reduces the costs of equipment and operation as these are self-contained magnets which operate on 115-volt AC power.

Slide 16:

If you have any requirement or need any other information related to lifting magnets then please contact with us on below detail:- Tel (360) 647 – 8438 Toll-Free(800) 965 – 4968 Fax(360) 539 -1850 Address: 700 Sunset Pond Lane, Suite #4 Bellingham, WA 98226 Website:-

authorStream Live Help