IMP PUMPS PRODUCT RANGE

IMP PUMPS PRODUCT RANGE : 

IMP PUMPS PRODUCT RANGE

IMP production program : 

IMP production program Circulating wet running pumps for HVAC ind. Wet running circulators: GHN, SAN, NMT (screw) and GHN, SAN, NMT (flanch), Centrifugal dry running pumps for HVAC ind. Dry running centrifugal pumps: CL, CV, PV, CB, CLP, ECL, ECB Cold water program pumps

CIRCULATORS : 

3 Suitable pallets of products 6 head-flow sizes: 4m – 3,2m3/h 6m – 3,4m3/h 6,5m – 3,4m3/h 7m – 6,2m3/h 8m – 8,4m3/h 12m – 9,2m3/h Connections: ½˝; ¾˝; 1˝; 1+¼˝ The length: 130mm or 180mm Three different usage of products For heating and acclimatization – GHN Twin pumps - GHND For sanitary water - SAN Wide operation area Three speed – operating areas Nominal pressure PN10 bar Medium temp. from -10°C up to +110°C CIRCULATORS

VARIABLE SPEED CIRCULATOR : 

4 VARIABLE SPEED CIRCULATOR Quick and optimal adaptability to hydraulic system Energy and money savings Silence operation in the system with TRV 1 pump – many possibilities Wide operation area Three regulating areas EGHN SMART Medium temp. from +2°C up to +110°C Nominal pressure PN10 bar Suitable pallets of products Connections : ½˝; ¾˝; 1˝; 1+¼˝ The length: 130mm or 180mm

ADVANTAGES OF CIRCULATORS : 

5 ADVANTAGES OF CIRCULATORS Silence operation Reliable products Isolation class H Closed rotor Rotor can and separating bush by SS AISI 316 2 sealing points Ceramic shaft and bearings for cooling applications Easy installation Enclosed installation material Removable cable gland 2 years warranty

CIRCULATORS FOR SANITARY WATER : 

6 CIRCULATORS FOR SANITARY WATER 3 types of pumps Constant speed pumps SAN 15/15 B Pumps with timer SAN 15/15 BT Pumps with timer and thermostat SAN 15/15 BTR Use for sanitary water supply Silence and safe operation in the system Dry run protection Isolation class H One sealing point Reliable operating and long life expectation Spherical motor Nominal pressure PN10 bar Suitable pallets of products Connections: ½˝ G Installation length: 65mm

COMMERCIAL CIRCULATING PUMPS : 

www.imp-pumps.com 7 COMMERCIAL CIRCULATING PUMPS 3 types of pumps Three-phases pumps for heating GHN Mono-phase for heating GHNM Three-phases pumps for sanitary water SAN Suitable pallets of products Connections: DN 40, 50, 65, 80 and 100 Hydraulics: Single or Twin pump GHND Nominal pressure PN6/10 bar Operating temp. from -10°C up to +120°C 2 years warranty

ADVANTAGES OF CIRCULATING PUMPS : 

info@imp-pumps.com www.imp-pumps.com 8 ADVANTAGES OF CIRCULATING PUMPS Silence operating Long life expectation Reliable products Enclosure class: IP 44 Thermal cut-out switch protection Isolation class H Closed and balanced rotor, made by stainless steel AISI 316 Separating bush and wall made by AISI 316 Just 2 sealing points 2 years warranty

VARIABLE SPEED CIRCULATING PUMPS : 

9 VARIABLE SPEED CIRCULATING PUMPS 2 models of pumps With integrated freq. converter EGHN 40-80 With separated freq. converter EGHN-L 40-80 Suitable pallets of products Connections: DN 40, 50, 65 and 80 Hydraulics: Single or Twin pump EGHND Regulation: according to constant Δp according to constant ΔT Nominal pressure PN 6/10 bar Operating temp. from -10°C up to +120°C 2 years warranty

VARIABLE SPEED CIRCULATING PUMPS – NMT : 

10 VARIABLE SPEED CIRCULATING PUMPS – NMT

NMT 20,25,32 : 

NMT 20,25,32 ADVANTAGES OF NMT 20 Permanent magnet motor Up to 78% of electric energy savings Impendance protected motor Used top quality materials Low-noise operation OPERATION OF NMT 20 Avtomatic operation Propotional pressure operation Three speed manual operation Automatic night-time duty

NMT 40, 50, 65, 80 : 

NMT 40, 50, 65, 80 NMT - New Motor Technology Electronically commutated motor Rotor with permanent magnets Specially developed electronic Suitable pallets of products Connections: DN 40, 50, 65 and 80 Hydraulics: Single or Twin pump NMTD Use for closed heating and venting systems Enable Central Control system – CCS Noiseless operation in the system To ensure high environment-residene conditions Regulation: according to constant ΔpC according to constant ΔpV Operation at maximal or minimal pump curve Saving of energy and money - efficiency ~ 75% Silence and safe operation Dry-run protection Thermal cut-out switch protection Enclosed installation material 2 years warranty

VARIABLE SPEED CIRCULATING PUMPS – NMT : 

13 VARIABLE SPEED CIRCULATING PUMPS – NMT Benefits for investors, engineers, installers and environment Benefits of NMT pump: ˝A˝ energy class product Up to 75% savings on energy according to three-speed pump Low Total Cost of ownership (↓TCO) Simply module structure and advanced technological solutions Specially designed cooling system High quality installed materials Module structure and easy exchangeability parts of pump Quick and optimal adaptability to hydraulic system Silence operation in the system with TRV Connection module for external sensors Easy managing by LCD display (by Ethernet communicator) Simple pump handling Economical and environmental friendly product

NMT PUMPS NMT ENERGY SAVES YOUR MONEY : 

14 NMT PUMPS NMT ENERGY SAVES YOUR MONEY Pump operate: 6% of time with full power 15% of time with 75% power 35% of time with 50% power 44% of time with 25% power Heating days Flow Flow Pump burdening Season burdening profile Percentage of burdening Pressure H Power P Draft EN 1151-4

NMT PUMPS NMT ENERGY SAVES YOUR MONEY : 

15 NMT PUMPS NMT ENERGY SAVES YOUR MONEY Operation time: 5000 hours in 1 year Draft EN 1151-4

CENTRIFUGAL PUMPS : 

16 CENTRIFUGAL PUMPS 3 types of pumps In-line pumps CV and PV In-line pumps CL and CLP Block pumps CB 2 programs of pumps Heating and cooling applications : CV, CL, CB Applications for sanitary water : PV in CLP Reliable operating Motors: standard IEC Nominal pressure PN 16 bar Operating temp. from -15°C(-30°C)up to +140°C Connections from DN 32 to DN 150 18 months of warranty

VARIABLE SPEED CENTRIFUGAL PUMPS : 

info@imp-pumps.com www.imp-pumps.com 17 VARIABLE SPEED CENTRIFUGAL PUMPS 2 types of variable speed pumps In-line pumps ECL Block pumps ECB Regulation options regulation of constant ΔpC regulation of constant ΔpV 2 programs of pumps Heating and cooling applications : CV, CL, CB Applications for sanitary water : PV and CLP Applications for sea water : CLP Reliable operating Regulation with frequency converter Motors: standard IEC Nominal pressure PN 16 bar Operating temp. from -15°C up to +140°C Connections from DN 40 to DN 150 12 months of warranty

COLD WATER PROGRAM : 

18 COLD WATER PROGRAM Selfpriming JET pumps Automatic working pressure systems Centrifugal selfpriming multistage pumps Submersible pumps for dirty water Submersible pumps with open impeller Multistage submersible stainless steel pumps Multistage submersible deep hole pumps

HIGH PRESSURE WORKING STATIONSPressure working stations up to Q= 700 m3/h and H=120m : 

19 HIGH PRESSURE WORKING STATIONSPressure working stations up to Q= 700 m3/h and H=120m

HIGH PRESSURE WORKING STATIONSANTI FIRE SYTEMS : 

HIGH PRESSURE WORKING STATIONSANTI FIRE SYTEMS

THE HONEST PRODUCT FOR THE HONEST PRICE : 

THE HONEST PRODUCT FOR THE HONEST PRICE