hawa ball valves, check valves, double

Views:
 
     
 

Presentation Description

butterfly valves, ball valves, pressure reducing valves, strainers, basket strainers, Y type strainers, gate valves, globe valves, check valves, reflux valves, plug valves, diaphragm valves, control valves, pulp valves, safety valves, industrial valves, pneumatic valves, actuated valves, pneumatic cylinders, forged steel ball valves, moisture separator, instant fittings, Y type control valves, electronic valves, non-return wafer check valves, steam traps, needle valves

Comments

Presentation Transcript

Slide 1: 

www.hawavalves.com

M. D. Forword : 

www.hawavalves.com M. D. Forword It is my pleasure to introduce and present to you our company, HAWA VALVES (INDIA) PVT. LTD., manufacturers and exporters of valves for specialized fields such as Oil & Gas, Offshore, Petrochemical, Power, Marine and General Industry. We are one of the largest valves manufacturers in India. We have our premier manufacturing facility and main co-ordination center in Navi Mumbai (New Bombay) on the outskirts of the great city of Mumbai (Bombay), and also modern facilities in Ahmedabad (Gujarat) and Hubli (North Karnataka), both of which have traditionally been centers for manufacturing engineering goods in India. We are an ISO 9001:2000 certified company, official Monogram Licensees of the American Petroleum Institute with API-6D, API-6A and API-600 Monogram Licenses. We were the 1st company in India to be awarded the coveted new API-600 License. Talk to us at HAWA VALVES, and know why we are called the Britney Spears of the Indian Valves Industry.

Ball Valves : 

www.hawavalves.com Ball Valves 1 Piece, Floating Ball, Full and Reduced Port Hawa Valves Cast Steel Ball Valves have been designed to meet the requirements BS 5351 / ASME B 16.34 / API 6D-ISO 14313 / API 608/MSS SP 72 End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 Fire tested design to API 607/API 6FA/BS 6755-II Flexible lip seats compensate for wear and changes in pressure Blow out proof stem construction Antistatic devices ensure electrical continuity between ball, stem & body Triple stem sealing ISO 5211 top pad for simplified gear/actuator mounting Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

1 Piece, Top Entry : 

www.hawavalves.com 1 Piece, Top Entry Anti-blow out stem : This part, being assembled from the inside of the bonnet, is shouldered and does not bear the strain on the ball. External sealing : Tightness is achieved by O-ring with graphite gasket backup. Solid trunnion ball : Working under full rated differential pressure with no displacement of the ball. Reduces seat wearing. Large bushing ensure a longer life. Self lubricated bearing : Low and constant torque even at high pressure and for large diameters. Seat design : The pressure seal principle of the seat ring, ensures bi-directional Sealing, even at low pressure.The original seat ring design, with piston effect, allows the double in-line sealing (Possibility of bleed valve). Seat pockets are machined in the one-piece body, which ensures a perfect alignment of the seals on the ball. The self-relieving of the body cavity pressure is higher from 0 to 10 % of the upstream Pressure. Top Entry design : One-piece body construction with one single sealing joint, not affected by pipe stress. The number of components has been kept to a minimum in order to simplify assembly and minimize spare parts. Simple dismantling of the bonnet gives access to all internals ( possibility to weld the valve in line). Actuation : The bonnet is a large and robust plate which allows easy mounting of any kind of actuator and steam extension.

2 Piece, Trunnion Mounted : 

www.hawavalves.com 2 Piece, Trunnion Mounted Hawa Valves Cast Steel Ball Valves have been designed to meet the requirements BS 5351/ASME B 16.34/API 6D-ISO 14313/API 608/MSS SP 72 Face to Face and End to End dimensions conform to ASME B 16.10 / ISO 5752 / BS 2080 / API 6D-ISO 14313 / DIN End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 Fire tested design to API 607/API 6FA/BS 6755-II Pressure energized seat rings with spring assistance for preloading ensure leak tightness even at low pressure Blow out proof stem construction Double block and bleed Antistatic devices ensure electrical continuity between ball, stem and body Bearing pads fix the ball and absorb total thrust of the medium relieving the downstream sealing of the load ISO 5211 top pad for simplified gear/actuator mounting Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

3 Piece, Trunnion Mounted : 

www.hawavalves.com 3 Piece, Trunnion Mounted Hawa Valves Cast Steel Ball Valves have been designed to meet the requirements BS 5351/ASME B 16.34/API 6D-ISO 14313/API 608/MSS SP 72 Face to Face and End to End dimensions conform to ASME B 16.10 / ISO 5752 / BS 2080 /API 6D-ISO 14313/ DIN End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 Fire tested design to API 607/API 6FA/BS 6755-II Pressure energized seat rings with spring assistance for preloading ensure leak tightness even at low pressure Blow out proof stem construction Double block and bleed Antistatic devices ensure electrical continuity between ball, stem and body Bearing pads fix the ball and absorb total thrust of the medium relieving the downstream sealing of the load ISO 5211 top pad for simplified gear/actuator mounting Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

1 Piece, Floating : 

www.hawavalves.com 1 Piece, Floating Hawa Valves Cast Steel Ball Valves have been designed to meet the requirements BS 5351 / ASME B 16.34 / API 6D-ISO 14313 / API 608/MSS SP 72 End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 Fire tested design to API 607/API 6FA/BS 6755-II Flexible lip seats compensate for wear and changes in pressure Blow out proof stem construction Antistatic devices ensure electrical continuity between ball, stem & body Triple stem sealing ISO 5211 top pad for simplified gear/actuator mounting Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

2 Piece, Floating : 

www.hawavalves.com 2 Piece, Floating Hawa Valves Cast Steel Ball Valves have been designed to meet the requirements BS 5351/ASME B 16.34API 6D-ISO 14313/API 608/MSS SP 72 Face to Face and End to End dimensions conform to ASME B 16.10 / ISO 5752 / BS 2080 /API 6D-ISO 14313/ DIN End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 Fire tested design to API 607/API 6FA/BS 6755-II Flexible lip seats compensate for wear and changes in pressure Blow out proof stem construction Antistatic devices ensure electrical continuity between ball, stem & body Triple stem sealing ISO 5211 top pad for simplified gear/actuator mounting Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

3 Piece, Floating : 

www.hawavalves.com 3 Piece, Floating Hawa Valves Cast Steel Ball Valves have been designed to meet the requirements BS 5351/ASME B 16.34/API 6D-ISO 14313/API 608/MSS SP 72 Face to Face and End to End dimensions conform to ASME B 16.10 / ISO 5752 / BS 2080 / API 6D-ISO 14313 / DIN End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN Butt weld end dimensions conform to ASME B 16.25 Fire tested design to API 607/API 6FA/BS 6755-II Flexible lip seats compensate for wear and changes in pressure Blow out proof stem construction Antistatic devices ensure electrical continuity between ball, stem & body Triple stem sealing ISO 5211 top pad for simplified gear/actuator mounting Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

What's New? : 

www.hawavalves.com What's New?

Certifications : 

www.hawavalves.com Certifications Approvals

Research & Developments : 

www.hawavalves.com Research & Developments This is our commitment and ongoing mission at Hawa Valves. Using state-of-the-art computer aided design (CAD) system, our team of design engineers perform 3-D modelling of parts and assemblies using advanced Analyses & Design Software Tools such as PROEngineer®, SolidWorks® and COSMOSWorks®. Under the direct supervision and responsibility of the Managing Director who has valuable and extensive exposure spread over 20 years in the industry, and headed by our Vice President (Technical Services) having experience of more than 15 years exclusively in Design of valves. Design, Research & Development Team comprising of 8 dedicated R&D Engineers at Head Office - Mumbai (Bombay) India.

Testing Facility : 

www.hawavalves.com Testing Facility 1.   Positive Material Identification (PMI) Equipment 2.   Factory Audit in Progress 3.   Type Acceptance Testing. 4.   Helium Leak Detection Test in Progress 5.   Factory Assisted Test witnessed by Client. 6.   Testing & Verifying Actual Flow Characteristics of the Valves 7.   Fire Test in progress 8.   Online Data Recording during the Type Acceptance Testing .9.   Valve after Cryogenic Test 10. Satisfied Inspector at Our Hubli Works 11. Offshore spec painting being checked.

Manufacturing : 

www.hawavalves.com Manufacturing

Marketing : 

www.hawavalves.com Marketing

Global Presence : 

www.hawavalves.com Global Presence Hawa Valves has exported their products to over 30 countries so far – please write to the Managing Director md@hawavalves.com for queries on your nearest contact, or if interested in representing us in countries where we do not have a presence as yet.

Contact Us : 

www.hawavalves.com Contact Us

authorStream Live Help