Steel Rolling Mills and Tube Mills

Views:
 
     
 

Presentation Description

These are used as raw materials for manufacturing different forms of steel to be used for specific purpose. These end products may be steel structures such as angles, channels or joists of various thicknesses and dimensions or plain rounds or twisted rods of varying diameters. Steel Re-rolling Mills convert billets and ingots to the required structures and sheets.

Comments

Presentation Transcript

Arial:

Steel Rolling Mills and Tube Mills

WenQuanYi Micro Hei:

Steel is the basic material used for every kind of industry, in engineering industry Iron ores are melted in a blast furnace, along with limestone and coke and after removal of impurities like sulphur and phosphorous, the molten iron is brought to its basic forms such as Mild Steel ingots, billets and slabs. These are used as raw materials. These end products may be steel structures such as angles. Steel Re-rolling Mills convert billets and ingots to the required structures and sheets.

DejaVu Sans:

Plants and equipments for steel re-rolling mills were earlier imported. But, presently, there are reputed manufacturers in India that are designing, manufacturing and installing such plants on turn-key basis. For ensuring the quality of the plants and mills, you need to insist upon certification of ISO 9001: 2000. At the same time, you should look for high performance without break down and minimum maintenance.

Century Schoolbook L:

According to your needs, you can get the Steel rolling mills of different types such as manual, automatic or semiautomatic. Rolling is a process in which metal is converted to desired forms. The end products through this process are rods, strips Rolling processes may also be classified as ring rolling, roll bending, roll forming, profile rolling and controlled rolling.

Office Theme:

The Reduction Gear Box comes with the provision of single, double or multi stage reductions, coupled to motor capacity varying between 100 HP to 2000HP. Gears in Module and DP system. These gear boxes are featured with dampen vibration, forced and splash lubrication and amply rated bearings. Coilers are used by rolling mills for coiling of TMT and CTD bars and plain rods that are utilized for drawing of wire and making fasteners.

PowerPoint Presentation:

You can also meet your requirement of Steel melting plants along with the ancillary equipments such as cooling towers, water softening plants, material handling equipments, melting furnaces, ingot moulds, bailing presses, induction furnaces, bottom plates, center column and shreading machines. Tube Mill plants can also be commissioned along with ancillary equipments like Strip entry guide, Driven and Idler stand, Welding Roll assembly, HF welder, HR slitting, guide roller, for making tubes of round size, square or rectangular, with thickness between 1 to 10mm.

PowerPoint Presentation:

Contact Us : Aman Machine Tools Private Limited Address : G. T. Road, Mandi Gobindgarh, Punjab - 147 301(India) Phone :+91-1765-255604/500100/257635 Mobile No. :+91- 9876011775 Visit Us: www.amanmachinetools.com

authorStream Live Help