study engineering in australia

Study Engineering in Australian Universities: 

1 Study Engineering in Australia Study Engineering in Australian Universities Dr Sam Man Keong ( 岑文强 ) Singapore Institute of Engineering Technologists (SIET) Website: www.siet.org.sg Email: sammk1951@gmail.com

Highlights: 

Study Engineering in Australia 2 Highlights Introduction. Engineering Education in Australia Australian Qualifications Framework Engineers Australia Types of Australia Universities The Sandstone Universities Group of Eight Australian Technology Network (ATN) Innovative Research Universities

Highlights: 

Study Engineering in Australia 3 Highlights Highlights of Some Engineering Schools in Australia International Engineering Alliance (IEA) Agreements covering tertiary qualifications in engineering Agreements covering competence standards for practising engineers Professional Engineers Board, Singapore.

About the Speaker - Dr Sam Man Keong (岑文强) : 

Study Engineering in Australia 4 About the Speaker - Dr Sam Man Keong ( 岑文强 ) Singapore : SP/NUS/NTU. Australia : MelbU/RMIT/CQU. Chartered Engineer (UK/Ireland/Australia) Chartered Builder (UK) Chartered Mathematician (UK) Chartered Scientist (UK) Chartered Environmentalist (UK). A life-long learner.

Introduction - Australia: 

Study Engineering in Australia 5 Introduction - Australia

Introduction - Australia: 

Study Engineering in Australia 6 Introduction - Australia Australia , officially the Commonwealth of Australia , is a country in the Southern Hemisphere comprising the mainland of the Australian continent , the island of Tasmania and numerous smaller islands in the Indian and Pacific Oceans . It is the world's sixth-largest country by total area . Neighbouring countries include Indonesia , East Timor and Papua New Guinea to the north, the Solomon Islands , Vanuatu and New Caledonia to the northeast and New Zealand to the southeast. A highly developed country , Australia is the world's thirteenth largest economy and has the world's seventh-highest per capita income . The population of 22.6 million is heavily concentrated in the Eastern states and is highly urbanised . Australia is a member of the G20 , OECD , WTO , APEC , UN , Commonwealth of Nations , ANZUS , and the Pacific Islands Forum .

Slide 7: 

Study Engineering in Australia 7

Engineering Education in Australia: 

Study Engineering in Australia 8 Engineering Education in Australia Australian Qualifications Framework The Australian Qualifications Framework (AQF) provides the hierarchy of educational qualifications in Australia . It is administered nationally by the Australian Government Department of Education, Employment and Workplace Relations . Engineers Australia The Institution of Engineers Australia , often shortened to IEAust and trading as Engineers Australia , is a professional body and not-for-profit organisation dedicated to being the national forum for the advancement of the engineering field within Australia . It has over 85,000 members from all engineering disciplines.

Australian Qualifications Framework: 

Study Engineering in Australia 9 Australian Qualifications Framework The framework divides all qualifications into three sectors : Schools Sector Vocational Education and Training Sector : Certificate (I, II, III, IV); Diploma; Advanced Diploma. Higher Education Sector : Diploma; Advanced Diploma; Associate Degree; Bachelor Degree; Graduate Certificate; Graduate Diploma; Master’s Degree; Doctorate Degree.

Engineers Australia: 

Study Engineering in Australia 10 Engineers Australia Established : 1919 Membership: Technicians/Engineering Associates Technologists/Engineering Officers Professional Engineers Website : www.engineersaustralia.org.au Established : 1919 Membership: Technicians/Engineering Associates Technologists/Engineering Officers Professional Engineers Website : www.engineersaustralia.org.au Established : 1919 Membership: Technicians/Engineering Associates Technologists/Engineering Officers Professional Engineers Website : www.engineersaustralia.org.au

Engineering House : the national office for Engineers Australia in Barton, Australian Capital Territory.: 

Study Engineering in Australia 11 Engineering House : the national office for Engineers Australia in Barton , Australian Capital Territory .

Types of Australia Universities: 

Study Engineering in Australia 12 Types of Australia Universities The Sandstone Universities Group of Eight Australian Technology Network (ATN) Innovative Research Universities

The Sandstone Universities: 

Study Engineering in Australia 13 The Sandstone Universities Sandstone universities can be taken to be either universities founded before World War I , or the oldest university in their respective state ; either definition gives the same set of universities, namely: The University of Sydney The University of Melbourne The University of Adelaide The University of Tasmania The University of Queensland The University of Western Australia

Slide 14: 

Study Engineering in Australia 14 University of Sydney (1850) University of Melbourne (1853)

Slide 15: 

Study Engineering in Australia 15 University of Tasmania (1890) University of Adelaide (1874)

Slide 16: 

Study Engineering in Australia 16 University of Queensland (1909) University of Western Australia (1911)

Group of Eight: 

Study Engineering in Australia 17 Group of Eight The Group of Eight ( Go8 ) is a coalition of leading Australian tertiary institutions, intensive in research and comprehensive in general and professional education. It was established informally as a network of vice-chancellors in 1994 and was formally incorporated in 1999. Go8 can be seen as an Australian version of the American Ivy League .

Group of Eight: 

Study Engineering in Australia 18 Group of Eight All members of the group except Australian National University (ANU), University of New South Wales (UNSW) and Monash University are known as " sandstone universities " and all of their primary campuses are based in the six largest Australian capital cities .

Slide 19: 

Study Engineering in Australia 19 Australian National University (1946)

Slide 20: 

Study Engineering in Australia 20 University of New South Wales (1949)

Slide 21: 

Study Engineering in Australia 21 Monash University (1958)

Australian Technology Network (ATN) : 

Study Engineering in Australia 22 Australian Technology Network (ATN) The Australian Technology Network (ATN) is a network of five universities from each mainland state of Australia , with a heritage of working closely with industry. The ATN was originally founded in 1975 as the "Directors of Central Institutes of Technology (DOCIT)", and later revived in 1999 in its present form.

Australian Technology Network (ATN) : 

Study Engineering in Australia 23 Australian Technology Network (ATN) University Location Founded University Status Curtin University Perth , WA 1902 1986 Queensland University of Technology Brisbane , QLD 1908 1989 Royal Melbourne Institute of Technology Melbourne , Vic 1887 1992 University of South Australia Adelaide , SA 1856 1991 University of Technology, Sydney Sydney , NSW 1843 1988

Slide 24: 

Study Engineering in Australia 24 RMIT University (1887) University of South Australia (1856)

Slide 25: 

Study Engineering in Australia 25 1902 Queensland University of Technology (1908) 1843 : The present day University of Technology originates from the Sydney Mechanics' School of Arts (the oldest Mechanics' Institute in Australia).

Innovative Research Universities : 

Study Engineering in Australia 26 Innovative Research Universities Innovative Research Universities ( IRU ), formerly Innovative Research Universities Australia , is a network of seven comprehensive universities committed to conducting research of national and international standing.

Slide 27: 

Study Engineering in Australia 27 University Location Founded Charles Darwin University Darwin , NT 2004 Flinders University Adelaide , SA 1966 Griffith University Brisbane , Gold Coast , QLD 1971 James Cook University Townsville , Cairns , QLD 1970 La Trobe University Melbourne , VIC 1964 Murdoch University Perth , WA 1973 The University of Newcastle Newcastle , NSW 1965 IRU – Member Universities

Slide 28: 

Study Engineering in Australia 28 Latrobe University (1964) University of Newcastle (1965)

Slide 29: 

Study Engineering in Australia 29 1970 1971

Slide 30: 

Study Engineering in Australia 30 1966 1973

Slide 31: 

Study Engineering in Australia 31 2004 : CDU 1989 : Northern Territory University 1984: Darwin Institute of Technology 1974 : Darwin Community College

Highlights of Some Engineering Schools in Australia: 

Study Engineering in Australia 32 Highlights of Some Engineering Schools in Australia University of Melbourne Latrobe University RMIT University Swinburne University of Technology Victoria University, Australia Griffith University University of Southern Queensland

University of Melbourne: 

Study Engineering in Australia 33 University of Melbourne The University of Melbourne is a public university located in Melbourne , Victoria . Founded in 1853, it is the second oldest university in Australia and the oldest in Victoria.

Slide 34: 

Study Engineering in Australia 34 Clock Tower of Old Arts Building (Built 1854)

Slide 35: 

Study Engineering in Australia 35 Ormond College (1879), University of Melbourne. Trinity college (1872), University of Melbourne

Slide 36: 

Study Engineering in Australia 36 The Entrance , University of Melbourne

Slide 37: 

Study Engineering in Australia 37 Alan Gilbert Building , University of Melbourne

Melbourne School of Engineering, University of Melbourne: 

Study Engineering in Australia 38 Melbourne School of Engineering, University of Melbourne The Melbourne School of Engineering at the University of Melbourne is the oldest engineering faculty in Australia . It was established in 1861, 8 years after the establishment of the University of Melbourne, and was made a Faculty in 1889. Melbourne Model (2008) : a combination of various practices from American and European universities, aimed at consistency with the European Union's Bologna process and international relevance and standing for its degrees.

Melbourne School of Engineering, University of Melbourne: 

Study Engineering in Australia 39 Melbourne School of Engineering, University of Melbourne Melbourne Model (2008) : To become a professionally accredited engineer, students now complete five years of study, starting with an engineering major in a three-year undergraduate degree with an engineering major, followed by a two-year Master of Engineering The Master of Engineering is available in the following specialisations: Biomedical Engineering Biomolecular Engineering Chemical Engineering Civil Engineering Electrical Engineering Environmental Engineering Geomatics Mechanical Engineering Mechatronics Software Engineering Structural Engineering

Engineering Library, University of Melbourne: 

Study Engineering in Australia 40 Engineering Library, University of Melbourne 1982 : My wife & elder son – Chee Meng 2011 : Sam & wife

Sam @ Melbourne U - 1982: 

Study Engineering in Australia 41 Sam @ Melbourne U - 1982 Geology Camp

Latrobe University: 

Study Engineering in Australia 42 Latrobe University La Trobe University is a multi-campus university in Victoria , Australia. It was established in 1964 as Victoria’s third university by an Act of Parliament. The main campus of La Trobe is located in the Melbourne suburb of Bundoora ; two other major campuses are located in the Victorian city of Bendigo and the NSW-Victorian border centre of Albury-Wodonga . The university has a number of smaller campuses at Mildura , Shepparton , and Beechworth as well as a campus in Melbourne's CBD .

Latrobe University at Bundoora Campus (Melbourne): 

Study Engineering in Australia 43 Latrobe University at Bundoora Campus (Melbourne)

Engineering at Latrobe University: 

Study Engineering in Australia 44 Engineering at Latrobe University Bundoora Campus (Melbourne): Bachelor of Computer Science Bachelor of Electronic Engineering Bachelor of Information Technology Bendigo Campus : Bachelor of Civil Engineering

Latrobe University - Bendigo Campus: 

Study Engineering in Australia 45 Latrobe University - Bendigo Campus Sandhurst School of Mines ( 1873 )  Bendigo School of Mines (1887)  Bendigo Technical College  Bendigo Institute of Technology (1967)  Bendigo College of Advanced Education (1976)  Latrobe University – Bendigo Campus ( 1991 )

Civil Engineering Department at Bendigo Campus, Latrobe University: 

Study Engineering in Australia 46 Civil Engineering Department at Bendigo Campus, Latrobe University Lisa Farrar, Prof Joe Petrolito & Sam MK (2011)

RMIT University: 

Study Engineering in Australia 47 RMIT University RMIT University is an Australian public university located in Melbourne , Victoria . RMIT was founded in 1887 by prominent grazier and philanthropist , The Hon. Francis Ormond . It is the third-oldest higher education provider in the state of Victoria and the seventh-oldest in Australia. RMIT was awarded royal patronage in 1954, and is the only Australian university to have received the honour.

RMIT University - History: 

Study Engineering in Australia 48 RMIT University - History Working Men’s College of Melbourne (1887)  Melbourne Technical College (1934)  Royal Melbourne Technical College (1954)  Royal Melbourne Institute of Technology (1960)  RMIT University (1992) Construction of the Working Men's College , circa 1880s

Slide 49: 

Study Engineering in Australia 49 Francis Ormond Building , home to the RMIT Chancellery

Slide 50: 

Study Engineering in Australia 50 Buildings 2 and 4 at RMIT City , home to the School of Art

Slide 51: 

Study Engineering in Australia 51 RMIT City's Swanston Precinct in the Melbourne CBD

Slide 52: 

Study Engineering in Australia 52 Building 8 at RMIT City , headquarters of RMIT's unions

Undergraduate Engineering Degrees at RMIT: 

Study Engineering in Australia 53 Undergraduate Engineering Degrees at RMIT Associate Degree in Engineering Technology (Civil Engineering) Associate Degree in Engineering Technology (Electrical/Electronics) Associate Degree in Engineering Technology (Network Engineering) Bachelor of Engineering (Advanced Manufacturing and Mechatronics) Bachelor of Engineering ( Aerospace Engineering ) Bachelor of Engineering (Automotive Engineering) Bachelor of Engineering (Biomedical Engineering) Bachelor of Engineering (Civil and Infrastructure) Bachelor of Engineering (Computer and Network Engineering) Bachelor of Engineering (Electrical Engineering) Bachelor of Engineering (Electrical and Electronic Engineering) Bachelor of Engineering (Electronic and Communication Engineering) Bachelor of Engineering (Mechanical Engineering) Bachelor of Engineering (Sustainable Systems Engineering)

Slide 54: 

Study Engineering in Australia 54 Swinburne University of Technology is an Australian public dual sector university based in Melbourne , Victoria . The institution was founded by the Honourable George Swinburne in 1908 and achieved university status in June 1992. Swinburne has five campuses in Melbourne at Croydon , Hawthorn , Lilydale , Prahran , Wantirna – and one in Sarawak , Malaysia . As one of only five dual sector institutions in Australia, Swinburne offers both TAFE and higher education qualifications.

Swinburne University of Technology - History: 

Study Engineering in Australia 55 Swinburne University of Technology - History Eastern Suburbans Technical College ( 1908 )  Swinburne Technical College (1913)  Swinburne Institute of Technology (1969)  Swinburne University of Technology (1 July 1992 )

Swinburne University of Technology – Hawthorn Campus: 

Study Engineering in Australia 56 Swinburne University of Technology – Hawthorn Campus

Engineering at Swinburne UT – Bachelor of Engineering: 

Study Engineering in Australia 57 Engineering at Swinburne UT – Bachelor of Engineering Biomedical Engineering Civil Engineering Electrical and Electronic Engineering Electronics and Computer Systems Mechanical Engineering Product Design Engineering Robotics and Mechatronics Software Engineering Telecommunication and Network Engineering

Slide 58: 

Study Engineering in Australia 58 Victoria University ( VU ) is a multi-sector tertiary institution (higher education and TAFE ) based in Melbourne , Australia with 10 campuses. VU offers qualifications in higher education, vocational education (TAFE), and short courses. VU also offers learning pathways enabling students to move from a certificate course through to an advanced diploma, degree, or postgraduate qualification by coursework or research.

Victoria University, Australia - History: 

Study Engineering in Australia 59 Victoria University, Australia - History Victoria University (VU) was founded in 1916 as Footscray Technical School. After successive mergers with TAFE colleges in Melbourne’s western suburbs, Victoria University of Technology was established by legislation of the Victorian Parliament in 1990 . It was renamed Victoria University in 2005 . VU was formed by a series of amalgamations with institutions across the west of Melbourne and has undergone several name changes. The institutions that were combined to form VU, include: Footscray Technical School (1916) , renamed Footscray Technical College (1958) Footscray Technical College, renamed Footscray Institute of Technology (1968) Footscray College of TAFE Newport Technical School, renamed Newport College of TAFE Gellibrand College of TAFE, renamed Western Metropolitan College of TAFE. Western Melbourne Institute of TAFE Melbourne College of Decoration (Painting, Decorating and Signwriting Programs only) Flagstaff College of TAFE Western Melbourne Institute of TAFE

Victoria University, Australia - Campuses: 

Study Engineering in Australia 60 Victoria University, Australia - Campuses Victoria University campuses are located across Melbourne's western suburbs and the city centre. VU currently has 10 campuses – City Flinders, City King, City Queen, Footscray Nicholson, Footscray Park, Melton, Newport, St Albans, Sunshine and Werribee. Victoria University courses are also delivered by a number of affiliates in Asia. In 2006, offshore students made up 10 per cent of the student body and 15 per cent of the University's income. Two of the largest affiliates are Sunway University College in Malaysia and Liaoning University in China.

Slide 61: 

Study Engineering in Australia 61 Victoria University, Footscray Park campus

Slide 62: 

Study Engineering in Australia 62 Engineering Building, Footscray Park Campus, Victoria University

Slide 63: 

Study Engineering in Australia 63 Victoria University City Campus in Queens Street

Engineering at Victoria University : 

Study Engineering in Australia 64 Engineering at Victoria University Bachelor of Engineering Architectural Engineering Building Engineering Civil Engineering Electrical and Electronic Engineering Mechancial Engineering Bachelor of Engineering Science (Become a qualified Engineering Technologist ) Electrical and Electronic Engineering Sports Engineering Bachelor of Technology (building Surveying)

Griffith University: 

Study Engineering in Australia 65 Griffith University Griffith University is a public , coeducational , research university located in the southeastern region of the Australian state of Queensland . The university has five satellite campuses located in the Gold Coast , Logan City and in the Brisbane suburbs of Mount Gravatt , Nathan and South Bank .

Slide 66: 

Study Engineering in Australia 66 Griffith University, Gold Coast Campus

Slide 67: 

Study Engineering in Australia 67 Griffith School of Engineering, Gold Coast Campus

Undergraduate Engineering Degrees at Griffith – Bachelor of Engineering: 

Study Engineering in Australia 68 Undergraduate Engineering Degrees at Griffith – Bachelor of Engineering Civil Engineering (Gold Coast) Electrical and Electronic Engineering (Gold Coast) Electronic and Computer Engineering (Nathan) Mechatronic Engineering (Gold Coast) Microelectronic Engineering (Nathan) Sport and Biomedical Engineering (Gold Coast) Sustainable Energy Systems Engineering (Nathan)

Slide 69: 

Study Engineering in Australia 69 The University of Southern Queensland (USQ) is based in Toowoomba , Queensland , Australia. The institution was established in 1967 as the Queensland Institute of Technology (Darling Downs). In 1971, it became the Darling Downs Institute of Advanced Education , then the University College of Southern Queensland in 1990 and finally the University of Southern Queensland in 1992.

Engineering Degrees at USQ: 

Study Engineering in Australia 70 Engineering Degrees at USQ On-campus and Distance Education. Associate Degree of Engineering Bachelor of Engineering Technology Bachelor of Engineering Master of Engineering Master of Engineering Practice Master of Engineering Technology Engineering Doctorate PhD Professional development single courses Single Engineering and Surveying courses (subjects) taken from USQ's programs are offered for students seeking to meet professional development needs, and for full fee paying cross-institutional enrolments.

BEng at USQ: 

Study Engineering in Australia 71 BEng at USQ Agricultural engineering major Civil engineering major Computer systems engineering major Electrical and electronic engineering major Environmental engineering major Instrumentation and control engineering major Mechanical engineering major Mechatronic engineering major Power engineering major Software engineering major

Distance Education at USQ: 

Study Engineering in Australia 72 Distance Education at USQ In July 2004 , USQ won the Commonwealth of Learning Award of Excellence for Institutional Achievement which recognises and honours excellence in distance education and open learning . In December 2004 , the University improved its distance education profile by being accredited with the Distance Education Training Council (DETC), an American public service organisation dedicated to identifying quality distance learning institutions.

Professional Accreditation -BEng: 

Study Engineering in Australia 73 Professional Accreditation -BEng A graduate of this program (BEng) is eligible to apply for membership of Engineers Australia as a graduate Professional Engineer. After further professional development, a graduate member with a Bachelor of Engineering may apply for chartered status as a Professional Engineer and, when granted, may use the post-nominal MIEAust CPEng . The Bachelor of Engineering program is accredited by Engineers Australia and, through an agreement reached between the professional engineering bodies of other countries (the Washington Accord ), is also recognised in the United Kingdom, the Unites States of America, Canada, Ireland, Hong Kong, New Zealand and South Africa.

Professional Accreditation – Technologist Route to Professional Engineer: 

Study Engineering in Australia 74 Professional Accreditation – Technologist Route to Professional Engineer Associate Degree of Engineering  Engineering Officer  OMIEAust, CEngO . Bachelor of Engineering Technology  Engineering Technologist  TMIEAust, CEngT . Master of Engineering Practice ( 6 semesters part-time by distance education)  Professional Engineer  MIEAust, CPEng.

International Engineering Alliance (IEA) : 

Study Engineering in Australia 75 International Engineering Alliance (IEA) Agreements covering tertiary qualifications in engineering The Washington Accord (1989) – Professional Engineering, normally of four years duration. The Sydney Accord ( 2001) - engineering technology, normally of three years duration. The Dublin Accord (2002) - technician engineering, normally of two years duration.

International Engineering Alliance (IEA) : 

Study Engineering in Australia 76 International Engineering Alliance (IEA) Agreements covering competence standards for practising engineers The APEC Engineer agreement ( 1999). This has Government support in the participating APEC economies. The representative organization in each economy creates a "register" of those engineers wishing to be recognised as meeting the generic international standard. Other economies should give credit when such an engineer seeks to have his or her competence recognised. The Agreement is largely administered between engineering bodies, but there can be Government representation and substantive changes need to be signed off at governmental APEC Agreement level. The Engineers Mobility Forum agreement (2001). It operates the same competence standard as the APEC Engineer agreement but any country/economy may join. The parties to the agreement are largely engineering bodies. There are intentions to draw EMF and APEC closer together. The Engineering Technologist Mobility Forum agreement was signed by participating economies/countries in 2003. The parties to the Agreement have agreed to commence establishing a mutual recognition scheme for engineering technologists.

Washington Accord - Full Signatories (2011): 

Study Engineering in Australia 77 Washington Accord - Full Signatories (2011) Australia - Represented by Engineers Australia ( 1989 ) Canada - Represented by Engineers Canada ( 1989 ) Chinese Taipei - Represented by Institute of Engineering Education Taiwan ( 2007 ) Hong Kong China - Represented by The Hong Kong Institution of Engineers ( 1995 ) Ireland - Represented by Engineers Ireland ( 1989 ) Japan - Represented by Japan Accreditation Board for Engineering Education ( 2005 ) Korea - Represented by Accreditation Board for Engineering Education of Korea ( 2007 ) Malaysia - Represented by Board of Engineers Malaysia ( 2009 ) New Zealand - Represented by Institution of Professional Engineers NZ ( 1989 ) Singapore - Represented by Institution of Engineers Singapore ( 2006 ) South Africa - Represented by Engineering Council of South Africa ( 1999 ) Turkey - Represented by MUDEK ( 2011 ) United Kingdom - Represented by Engineering Council UK ( 1989 ) United States - Represented by Accreditation Board for Engineering and Technology ( 1989 )

Washington Accord - Provisional Signatories (2011): 

Study Engineering in Australia 78 Washington Accord - Provisional Signatories (2011) Bangladesh - Represented by Board of Accreditation for Engineering and Technical Education Germany - Represented by German Accreditation Agency for Study Programs in Engineering and Informatics India - Represented by National Board of Accreditation of All India Council for Technical Education Pakistan - Represented by Pakistan Engineering Council Russia - Represented by Russian Association for Engineering Education Sri Lanka - Represented by Institution of Engineers Sri Lanka

APEC Engineer Member Economies : 

Study Engineering in Australia 79 APEC Engineer Member Economies Members of the agreement have full rights of participation in the agreement; each operates either a national section of the APEC Engineer register or a national section of a combined APEC Engineer/International Professional Engineer (IntPE) register ; registrants on these national sections may receive credit when seeking registration or licensure in the jurisdiction of another member.

APEC Engineer Member Economies : 

Study Engineering in Australia 80 APEC Engineer Member Economies Canada - Represented by Engineers Canada ( 2000 ) Chinese Taipei - Represented by Chinese Institute of Engineers ( 2005 ) Hong Kong China - Represented by The Hong Kong Institution of Engineers ( 2000 ) Indonesia - Represented by Persatuan Insinyur Indonesia (Institution of Engineers) ( 2001 ) Japan - Represented by Institution of Professional Engineers Japan ( 2000 ) Korea - Represented by Korean Professional Engineers Association ( 2000 ) Malaysia - Represented by Institution of Engineers Malaysia ( 2000 ) Australia - Represented by Engineers Australia ( 2000 ) New Zealand - Represented by Institution of Professional Engineers NZ ( 2000 ) Philippines - Represented by Philippine Technological Council ( 2003 ) Russia - Represented by Russian Association for Engineering Education ( 2010 ) Singapore - Represented by Institution of Engineers Singapore ( 2005 ) Thailand - Represented by Council of Engineers Thailand ( 2003 ) United States - Represented by National Council of Examiners for Engineering and Surveying ( 2001 )

Slide 81: 

Study Engineering in Australia 81 Website : http://www.peb.gov.sg/peb/html/index.html The Professional Engineers Board Singapore (PEB) is a statutory board in the Ministry of National Development . PEB was established since 1971 under the Professional Engineers Act.

PEB - Mission : 

Study Engineering in Australia 82 PEB - Mission To safeguard life, property, and the welfare of the public by setting and maintaining high standards for registering professional engineers, and regulating and advancing the practice of professional engineering.

Registration as a Professional Engineer (Singapore): 

Study Engineering in Australia 83 Registration as a Professional Engineer (Singapore) Branches : Civil, Electrical and Mechanical. An approved degree or qualification . Not less than 4 years of relevant practical experience . Sit and pass the examinations prescribed by the Board: Fundamental of Engineering Examination ( FEE ) Practice of Engineering Practice Examination ( PE ) An Interview .

Slide 84: 

Study Engineering in Australia 84 Flow Chart – To become a PE in Singapore Step 1 – An Approved Degree or Qualification Step 2 – To sit & Pass the FEE Exam Step 3 – To complete at least 4 years of relevant practical experience . Step 4 – To sit & pass the PE Exam Step 5 – To pass the Professional Interview Professional Engineer (PE)

Questions & Answers: 

Study Engineering in Australia 85 Questions & Answers Thank You 自强不息 , 力求上进